iDRY Vacuum Kilns

Sponsors:

Ms200t running issues

Started by Grimace71, June 05, 2018, 11:14:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Grimace71

I need help with why after I rebuilt the carb it now only starts when I'm holding the trigger and won't stay running  thanks 

teakwood

try adjusting the L and LA screw. first put them to the original position. On stihl's its normally L and H open one turn. look at you manual
National Stihl Timbersports Champion Costa Rica 2018

ZeroJunk

Yes. Turn the LA screw in clockwise until the saw will stay running, hopefully. Then adjust the L screw for max RPM. Then turn the L screw CCW another 1/8 to 1/4 turn. Then adjust the LA CCW until the chain quits turning. That's usually pretty close.

ladylake

 

 If adjusting doesn't help check the needle valve for dirt or the metering lever a little to high letting too much fuel in.   Steve
Timberking B20  18000  hours +  Case75xt grapple + forks+8" snow bucket + dirt bucket   770 Oliver   Lots(too many) of chainsaws, Like the Echo saws and the Stihl and Husky     W5  Case loader   1  trailers  Wright sharpener     Suffolk  setter Volvo MCT125c skid loader

Thank You Sponsors!