iDRY Vacuum Kilns

Sponsors:

How are Y'all charging using an Alaskan Chainsaw mill?

Started by POSTON WIDEHEAD, November 19, 2017, 02:47:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ToddsPoint

Quote from: Kbeitz on November 21, 2017, 11:57:39 AM
Where would one buy a auxiliary oiler?

Bailey's sells a little fitting that goes in a hole you drill in the edge of your bar.  Oil tank and hose with on/off and you're there.  Gary
Logosol M7, Stihl 660 and 290, Kubota L3901.

Kbeitz

Quote from: ToddsPoint on November 22, 2017, 05:36:18 AM
Quote from: Kbeitz on November 21, 2017, 11:57:39 AM
Where would one buy a auxiliary oiler?

Bailey's sells a little fitting that goes in a hole you drill in the edge of your bar.  Oil tank and hose with on/off and you're there.  Gary

Thanks... It took me a while but I found it.

http://www.baileysonline.com/shop.axd/Search?keywords=967+injector
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

bkaimwood

There is not enough money in the world. $250 an hour wasn't enough so I moved to $500...At that point it was determined that there was not enough money. I no longer use it...
bk

terrifictimbersllc

DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide 55 Yanmar,  LogRite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

starmac

If I had to run it, that is not only a good answer, it is THE only answer.
Old LT40HD, old log truck, old MM forklift, and several huskies.

Thank You Sponsors!