iDRY Vacuum Kilns

Sponsors:

Planting Pine Seedlings in the Cold

Started by TroyC, January 14, 2024, 10:19:38 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TroyC

I have a loblolly bare root seedling planting to do next week in Central Georgia. The plan is to put in 5,000 bare root seedlings Thursday/Friday and the low Saturday morning after the planting is low 20's or so. Daytime highs next week should be in the 45-50 range. Just wondering what to expect and if this low temperature will affect the survival rate.

Southside

Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

customsawyer

You will want to make sure that if the seedlings freeze while in the bag, you let them thaw before pulling them out, or it can damage the fine hair roots. It doesn't take much to protect them. A small tarp over them and some pine straw on that will do it. If you are planting by hand, you will need to let the ground thaw enough so there isn't a crust that can skin the bark when packing with your boot heel. Give me a call if you need to, I've planted more than my fair share.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

TroyC

Thanks Jake! Picking up seedlings today at the Forestry service and using their small planter that goes behind the tractor. Thermometer showing 19 over here in Cadwell so I guess you are about the same. I'll keep seedlings from freezing tonight and will plant tomorrow and Thursday after it warms enough to get tractor going. I was concerned about what happens after I get them in the ground but hopefully the soil will not freeze. I did not know that the seedlings could withstand freezing after they are pulled. I feel for our northern friends in this cold weather. Stay warm this week!

customsawyer

Well I know how it went but I'm giving Troy a poke in the ribs to tell the tale. Fill them in on it Troy, so someone else can have it on here for later.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

TroyC

The planting went as well as could be expected for someone that didn't know what they were doing. Got the seedlings and planter from the Forestry Service and stopped by Jake's on the way home. He gave me some real solid advice that saved me a great deal of grief. Thankfully I had someone to ride on the planter and stick the seedlings in the ground the next day. Took 8 hours for us to plant the 5000 seedlings.

The main problem I had was that the planter did not work on the TYM tractor. Seems the distance between the top link and lift arms on a compact tractor are different (shorter) than a regular tractor. The 48 hp TYM would not lift the planter after spending about an hour getting it connected. So, off the TYM and onto the Ford 2600. The Ford handled it OK but was light on the front end. Ended up the Ford was a better choice for this job anyway.

I'll see how many survived when I get back up for the Project.


TroyC


TroyC

Update: 
Stopped by the farm last week and the planting is doing well! Only saw a handful that didn't make it and i was surprised how fast they are growing.

Ron Scott

Do a 1 year and a 3-year survival count. If your 1-year survival is less than 80% do a "fill in" hand planting to retain your plantations desired number of trees/acres.
~Ron

TroyC

This planting was just to add to the natural regeneration. Last month I did notice a little more mortality on the new plantings but not bad. Dry weather may have been the cause. The natural regeneration is going good and the deer and other wildlife are thriving.

SwampDonkey

I've transplanted in mid-late April weather before up here. It will freeze most every night then and some days, even snow. With greenhouse stock, one has to be careful of any new shoot elongation that early. We get frost until the 10th of June some springs up here. I've seen lots of wild balsam fir be burned in June. Ash is very susceptible to frost, that is why it is a late flusher. Ash grows like weeds here, like balsam does.
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Thank You Sponsors!