iDRY Vacuum Kilns

Sponsors:

sugihara guide bars

Started by ga jones, January 03, 2011, 09:16:38 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ga jones

anyone else use sugihara bars? I started using them about 7 months ago.They were recomended by some other logger friends.Awsome so far. lighter, wear like iron .They also flex much better and dont bend.
380c timberjack c4 treefarmer international trucks jonsered saws. Sugi hara bars d31 komatsu 350 tj grapple

weimedog

Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

chevytaHOE5674

I have a couple of them but the trouble is finding them anymore. About the only place I know of to buy them is the eBay store.

Cut4fun

There is a stihl dealer in Indiana that sales them.

weimedog

Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

wannabeonetoo

Quote from: weimedog on January 03, 2011, 09:21:14 AM


What are you doing with that Bushhog blade in the back of the truck  :o Isn't it supposed to be uder the deck  :D

Steve

weimedog

Quote from: wannabeonetoo on January 03, 2011, 12:51:58 PM

What are you doing with that Bushhog blade in the back of the truck  :o Isn't it supposed to be uder the deck  :D

Steve

Not many would have picked up on that! It would be under that mower if it was a genuine "Red" mower vs. that green wanabe!
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

Thank You Sponsors!