iDRY Vacuum Kilns

Sponsors:

Now to sand and put on the finish .

Started by Bill_G, February 02, 2013, 09:16:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bill_G


GeorgeK

George Kalbfleisch
Woodmizer LT40, twin blade edger, Bobcat A300, Kubota L48 and yes several logrites!

Jay C. White Cloud

That is really nice work Bill.  That will fly down the slope!!!!
"To posses an open mind, is to hold a key to many doors, and the ability to created doors where there were none before."

"When it is all said and done, they will have said they did it themselves."-teams response under a good leader.

Axe Handle Hound

That's some great looking winter fun Bill!  Did you bend the ash for the toboggan yourself?  If so, any pics, tips, hints on how to do it?  I've had realy hit and miss results with bending steamed wood.   

Bill_G

Yes I bent the Ash , I will try and post some pics of the process . You have to keep away from any defects and have good straight grain .

Bill_G

Here are some pics of the mold I made for bending . 

   , 

 

 

samandothers


GeorgeK

Can we ask about your steam chamber. Great work!
George Kalbfleisch
Woodmizer LT40, twin blade edger, Bobcat A300, Kubota L48 and yes several logrites!

Bill_G

This is the one I built for the long slats , I have two other smaller ones I use for shorter stock with basket making . 

  

 

justallan1


Thank You Sponsors!