iDRY Vacuum Kilns

Time:12/13/22 0800

Started by Don P, December 13, 2022, 08:02:06 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Don P

The forum clock and my computer's clock just realigned.
It has been growing to about 7 minutes different. Was there a manual reset or is there something magic going on?

Southside

The Hall of Souls is full again and all is well in the Universe. Go and tell the story... :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Old Greenhorn

Well time is just relative and most of us never have enough anyway.
Tom Lindtveit, Woodsman Forest Products
Oscar 328 Band Mill, Husky 350, 450, 562, & 372 (Clone), Mule 3010, and too many hand tools. :) Retired and trying to make a living to stay that way. NYLT Certified.
OK, maybe I'm the woodcutter now.
I work with wood, There is a rumor I might be a woodworker.

Southside

You don't have enough relatives?  :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Jeff

Our server is growing old again. I suspect it's internal battery is dead, and everytime I do a reboot, it was loosing a few seconds. I reset it last night. I needed a real computer to do it, which I did not have all summer. 
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Southside

Oh yeah, here I get all universe forces  and such then Jeff comes in and tells everyone he is Santa Claus.  :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Old Greenhorn

Tom Lindtveit, Woodsman Forest Products
Oscar 328 Band Mill, Husky 350, 450, 562, & 372 (Clone), Mule 3010, and too many hand tools. :) Retired and trying to make a living to stay that way. NYLT Certified.
OK, maybe I'm the woodcutter now.
I work with wood, There is a rumor I might be a woodworker.

rusticretreater

There should be a service that allows the server to correct its time after getting it from one of the atomic clocks.  NTP-network time protocol.  Called W32Time on Windows and you use the NTPd daemon on linux.

https://learn.microsoft.com/en-us/windows-server/networking/windows-time-service/configuring-systems-for-high-accuracy

https://timetoolsltd.com/ntp/how-to-install-and-configure-ntp-on-linux/
Woodland Mills HM130 Max w/ Lap siding upgrade
Kubota BX25
Wicked Grapple, Wicked Toothbar
Homemade Log Arch
Big Tex 17' trailer with Log Arch
Warn Winches 8000lb and 4000lb
Husqvarna 562xp
2,000,000th Forestry Forum Post