iDRY Vacuum Kilns

Sponsors:

chain sharpening

Started by poulan man, August 09, 2014, 09:11:31 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

poulan man

August 09, 2014, 09:11:31 AM
 :P good morning fellas, question about chain sharpening.....ive been a marine mechanic for 26 yrs and in my ventures i used to work on stihl saws alot and sharpend a few chains , but that was yrs ago..... i cut my own wood now and run a poulan 16" bar , i got my own sharpener but i cant remember exactly what angle and such to sharpen... can you help me?   its  A OREGON CHAIN S56  3/8   GAUGE IS 50 CAN YOU HELP ME...?
'
'

LeeB

#1
August 09, 2014, 09:26:30 AM
http://www.oregonproducts.com/pro/pdf/maintenance_manual/ms_04.pdf

Try this link. Searching on google tells me 30°.
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

poulan man

#2
August 09, 2014, 05:19:16 PM
it came with 3 grinding wheels.... 1/8   3/16  and 1/4 i believe , im not sure wich one... and its either a 25 or 30 degree cut.. cant find out for sure .. can any one help me please

lpresnell

#3
August 12, 2014, 08:33:01 AM
If it has 91 on the drive links, the angles are 30 & 55 with a 1/8 wheel. Hope this helps
Print
Go Up Pages1
User actions

Thank You Sponsors!