iDRY Vacuum Kilns

Sponsors:

A day at the Fair

Started by Peter Drouin, September 27, 2014, 09:23:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peter Drouin

Had some big pumpkins


  

  

 
And my favorite color.


 
And some guys making tables.


  

 
A ban Saw and a firewood processor.


  

 
And a guy that can carve too.


 
You can see how the cane started and finished.


 
And look at this will all the pieces to make it then turn it.


 
 

 

I found a friend for the old goat too. :D :D


 
Tractors and Tractors


  

 
A lot of one lungers.


  

  

  

 

And my old friends.




Ross, Jeramy and my wife Ann.
And all the toys. :D :D :D ;D


  

  

  

  

  

  

 
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Jim_Rogers

Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

mad murdock

Makes me want to go to the Fair!  Some real nice pics of a fun time 8) thanks!
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D

POSTON WIDEHEAD

I wish we had fairs like that.
The older I get I wish my body could Re-Gen.

ST Ranch

AS per others, WOW what a FAIR! & thx for the pics - I have not seen anything like that for a long time in our part of the woods.
Tom
LT40G28 with mods,  Komatsu D37E crawler,
873 Bobcat with CWS log grapple,

timberlinetree

Nothing better than a nice day at the fair! Thanks for sharing.
I've met Vets who have lived but still lost their lives... Thank a Vet

Family man and loving it :)

ozarkgem

any more pics of the wood splitter. That thing looks kick ash!
















Mighty Mite Band Mill, Case Backhoe, 763 Bobcat, Ford 3400 w/FEL , 1962 Ford 4000, Int dump truck, Clark forklift, lots of trailers. Stihl 046 Magnum, 029 Stihl. complete machine shop to keep everything going.

Peter Drouin

Quote from: ozarkgem on September 28, 2014, 06:38:44 AM
any more pics of the wood splitter. That thing looks kick ash!




Two men can use it at the same time, One each side. And you might be surprised how fast it goes.


 











A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

We use to go to a lot of fairs. Was that Deerfield?
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

goose63

Did you see all that in one day? would take me all weekend  8)
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

Peter Drouin

Quote from: thecfarm on September 28, 2014, 07:23:37 AM
We use to go to a lot of fairs. Was that Deerfield?



Yes, Are you going to Fryeburg? Ann and I are going Tue. 8)





Quote from: goose63 on September 28, 2014, 07:26:50 AM
Did you see all that in one day? would take me all weekend  8)




Yes, WE move fast. :D :D :D You have to remember ½ the fair is kids rides. :D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

Quote from: POSTONLT40HD on September 27, 2014, 10:59:02 PM
I wish we had fairs like that.




Don't you have 4H down there, And farms with cows.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

POSTON WIDEHEAD

Quote from: Peter Drouin on September 28, 2014, 11:58:23 AM
Quote from: POSTONLT40HD on September 27, 2014, 10:59:02 PM
I wish we had fairs like that.




Don't you have 4H down there, And farms with cows.

We have 4-H but the cartel shows are now not part of the fairs. In fact, the fair in my county no longer exist. The lock University need the land for parking.
The older I get I wish my body could Re-Gen.

Peter Drouin

Well, maybe you can get some like minded people together and work on that.
I think up here we have a lot of country people and that makes it work, I don't know. :)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

Peter,nope no fair this year.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

whitepine2

Quote from: ozarkgem on September 28, 2014, 06:38:44 AM
any more pics of the wood splitter. That thing looks kick ash!
I got me one of these was called a power ax made in Ma.someplace
very fast and not OASH approved.

Peter Drouin

Quote from: thecfarm on September 28, 2014, 03:38:19 PM
Peter,nope no fair this year.




It's just down the road from you. smiley_headscratch.
Are you going to Ross's open house?
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

@Peter Drouin Fryeburg? That is about 1½ hours from me. Money to get there,money to get in. Been a hard year for thecfarm. Almost had crop failure a few times.  :(  We are doing things,but have to choice what to do. And not to do.
When is Ross's open house?
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Dave Shepard

You can walk to Ross' s, can't you? It's just on the other side of Winchestertonfieldville, isn't it? I went to the '02 open house. Six hours for me.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

thecfarm

Ross's is no problem. I'm on one end of Chesterville,he's on the other end,a big 10 minutes away,at 40mph. I think in April will be the open house?
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Peter Drouin

Ray, It's Saturday Oct 11 (9 AM to 2 PM.
Rain or shine. 8) 8) 8) I'm picking up a bunch of stuff for the mill. And besides, I love Maine as much as NH. smiley_thumbsup
Hope to see you there.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

That one snuck up on me.   ::)  I might not make it. I have a job at a local hardware store. I just started about 2 weeks ago. I already asked for 2 days off. We have to work weekends. But I would like to see ya. I will have to ask.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

WDH

OK, y'all can meet so long as there is not a Grits Conspiracy  :)
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

GAB

Quote from: WDH on September 29, 2014, 08:33:09 AM
OK, y'all can meet so long as there is not a Grits Conspiracy  :).

Ray:
I won't be going and besides my grits supplier is out galavanting the western part of the continent.  If there is a grits conspiracy this October, I'm not in on it this time, but be on the lookout in April.
Gerald
W-M LT40HDD34, SLR, JD 420, JD 950w/loader and Woods backhoe, V3507 Fransguard winch, Cordwood Saw, 18' flat bed trailer, and other toys.

Peter Drouin

Quote from: WDH on September 29, 2014, 08:33:09 AM
OK, y'all can meet so long as there is not a Grits Conspiracy  :)




:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D




A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Thank You Sponsors!