Started by PAmizerman, April 14, 2018, 08:09:41 PM
0 Members and 1 Guest are viewing this topic.
Quote from: PAmizerman on April 15, 2018, 11:40:40 AMI was told that this blower is meant to drop the sawdust out the bottom gently and not have to be over a sealed container. But I have not done the research on it yet. Any idea how to tell?
Quote from: YellowHammer on April 15, 2018, 11:59:58 AMIts feeding the sawdust through the blower, into the side duct, pushing the material through the cyclone. The dust spins out the bottom, the exhaust air is driven out of the top. If the blower motor was on the top it would require a vacuum to pull the material into the cyclone, which requires a sealed bin on the sawdust drop funnel.I set my cyclone up like your picture, and it will indeed drop the sawdust straight down into a nice pile. I drop mine into a self dumping forklift hopper.
Quote from: YellowHammer on April 20, 2018, 11:11:40 PMIt's a Woodmaster/Timberking 5 hp single phase 220 blower going into an Oneida cyclone and all the sawdust dropping into a forklift self dumping hopper.
Page created in 0.277 seconds with 30 queries.