iDRY Vacuum Kilns

Sponsors:

stihl 025 replacement carb

Started by tbrickner, October 16, 2010, 07:47:37 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tbrickner

Does anyone know of a replacement carburetor for a stihl 025 saw.

I have one on it that came from the factory without a High adjustment and want to replace it with one that has the Idlt, Low and High adjustment so I don't burn up the saw.

Any help would be appreciated.

Tom

joe_indi

Tom,
What you need is the Walbro Carburetor model WT-215
Part number 1123 120 0605.
This carb has 3 screws (L, H, LA)
It used to be there on the 021,023 and the 025.
Later on it came on the newer versions of these saws (MS210, MS230 & MS250)
Nowadays these come with a Zama carb (C1Q-S76B)
Go for the Walbro WT-215

Joe

HolmenTree

Joe the older Japanese Zama carbs were good. My old mid 1990's 020T had a Zama part # C1Q-S16,A 
For people interested in replacing their MS200 Chinese Zamas ,this would be a good upgrade.
Willard.
Making a living with a saw since age 16.

Magicman

Click on our own "Go To"  guy there on the left, Chainsawr:    http://store.chainsawr.com/
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

joe_indi

Quote from: HolmenTree on October 16, 2010, 01:52:37 PM
Joe the older Japanese Zama carbs were good.

Willard,
Very true, I have seen the Japanese Zamas on quite a few older saws and brushcutters.
But the current ones are a different story altogether.
BTW, I heard that Stihl has bought over Zama.
But that Zama USA is not part of the deal.

Joe

tbrickner

Thanks fellas,

I'll try to get the WT-215 for the saw.

I appreciate your help.

Tom

Thank You Sponsors!