Naarva Felling Head?

[JDeere]

Has anybody ever used a Naarva felling head on their excavator. I am researching what is available for a 16 ton excavator and came across that brand. I would like to put a head on my machine for winter but don't really want to buy an un-tested unit. Thanks for any info.

[DDW_OR]

what did you get?

[Big Rooster]

If you want just a felling head try Ryans DS-20 or DS-28.  It is a straight felling head (dangle style) and built really tough

[Big Rooster]

If you want just a felling head try Ryans DS-20 or DS-28.  It is a straight felling head (dangle style) and built really tough

[DDW_OR]

What i want is a Harvester head that will fit on a 2008 Bobcat 331 excavator.
Naarva S23 = 518 pounds
Arbro 400 = 616 pounds

or a pull through delimber i can use with the Bobcat 331

Bobcat 331, year 2008
Bobcat specs
Horsepower - 41.8 hp
Operating Weight - 7,756 lb
Rated Lift Capacity - 2,416 lb
Auxiliary Std Flow - 15.9 gal/min
Auxiliary Pressure - 2,600 psi
Hours - 2,045

[DDW_OR]

getting an Arbro 400 stroke harvester for the Bobcat E80 to cut and delimb the trees.
then a turbo saw for the Bobcat 331 to cut the small trees and the brush.
then use the Brushhound 30EX on the 331 to mow the area

the tree size difference between the Arbro 400 and 1000 is 4 inches and $25,000.

[labradorguy]

Did you end up getting the Naarva or Ambro?

[DDW_OR]

i have the following
Arbro 400 stroke harvester for the Bobcat E80.
turbo saw and Brushhound 30EX for the Bobcat 331

have not used the Arbro 400, other prioritys came up

[labradorguy]

Let me know how you like it after you get it in the woods.

[starmac]

Just curious, how big of trees do you typically cut with a setup that size?

[DDW_OR]

Hakmet - Arbro-Stroke Harvester Heads