Print Page - Kasco 2b

Title: Kasco 2b
Post by: Jmjacobs on January 14, 2019, 10:06:15 PM

I recently acquired a crascall Saw 2 I believe it's a to B it has a debarker on the bottom 20 foot with an extension everything's been removed off of it and rebuilding it and wondering if anybody has a manual of some sort or if I should just start building what I think I should put on there I can't find any information anywhere please help if you have any information thank you

Title: Re: Kasco 2b
Post by: 47sawdust on January 15, 2019, 07:11:59 AM

Welcome,I owned a Kasco IIB mill for 3 years,sold it and bought a Mizer.The manual for that mill was a joke.
Forum member Larry had the same mill.He has a lot of pictures in his gallery of that mill.It will probably be your best bet for images of a working mill.
At the top of the page is a heading marked members,click on that ,type in Larry with a capital L click on his name ,click on his gallery and you will be introduced to a fine forum member,one of many.
Good luck

Title: Re: Kasco 2b
Post by: Chuck White on January 15, 2019, 10:49:30 AM

Welcome to the Forestry Forum, Jmjacobs!

Title: Re: Kasco 2b
Post by: Bob Kulp on July 20, 2020, 12:11:42 AM

I have a manual...if you haven't gotten one. I also just posted that I need to replace a DC electric gear motor on the carraige advance, and I'm not sure what is a replacement, as well as the blade tensioner "pancake". Can you help with that?
(https://forestryforum.com/gallery/albums/userpics/61282/IMG_9121.jpg?easyrotate_cache=1595218062)

Title: Re: Kasco 2b
Post by: judeholler on September 22, 2021, 07:18:27 PM

I know the last post was over a year old, but did you find a DC motor replacement?

Neal

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Jmjacobs on January 14, 2019, 10:06:15 PM