iDRY Vacuum Kilns

Sponsors:

Hot rod

Started by Peter Drouin, June 08, 2019, 12:39:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peter Drouin

A roof yes. But first I'll put the GMC 3500 dump truck on the lift run the thing all the way up then figure the garage door in over the truck. 
Then see how high the roof has to be. I like to build things from the ground up. ;D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

Ten yards of flat work kicked my butt. Pixs latter got to cut the rest of an order.
running-doggy
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

78NHTFY

Nice going Peter!!  Have wanted a lift for years, but you are DOING it!  Now you can rest cutting your order on that comfortable new seat on your mill :D :D.  Looking forward to the pics....All the best, Rob.
If you have time, you win....

Peter Drouin

 

 
Put burlap down then the plastic. then flood the thing


 
Will dry slow that way. I should wait 7 days Going to do just 5. :D 8)
More, 

Jenset going there.


 
Setup fast with it being 90° today, Ten yards with help from a 70-year-old and a 55-year-old
 ;D
Only had a wheelbarrow full left over. I still got it. 8)
Cut 80 2x4x16' and had a HOT ROD stop in to for a price list.


 


 
43 ford. With a 350 GM engine in it. So you guys want a fast car/truck. Power it with a GM plant
Sorry, Jeff. :D :D ;D
Long day for a 64-year-old in the 90s ;)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Bruno of NH

Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

sawguy21

Every time somebody mentions pouring concrete my back starts to hurt. :D That is hard work! That is one sweet Ford pickup 8)
old age and treachery will always overcome youth and enthusiasm

thecfarm

And another sickness has been taken upon. ;D 
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Peter Drouin

Quote from: thecfarm on July 10, 2019, 09:25:40 PM
And another sickness has been taken upon. ;D


smiley_thumbsup smiley_wavy, Hi, cfarm hows things up there north of me?
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

Lonely. I need some company. Like someone with a Hotrod to keep me company. ;D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

crowhill

For you Ford guys that want a bit more speed go to   Racing Junk Find "Silent Thunder" T-Bird  on Google. Friend of mine built this little Thunderbird up which did ok on the drag strip.
TimberKing B-20, Kubota M-4900 w/FEL with tooth bar, hyd thumb and forks, Farmi winch, 4 chain saws.

Peter Drouin

All morning, but I got the 1968 Impala off the lift, Took it all apart and now it's home. [the lift]
I did try to buy the ss but he wanted too much for it.
Just a little more work and the 10,000 lb lift will pick up an 1800 lb Hot Rod just find.  :D :D :D 8) 8) 8) 8)


 

 

 


Happy days,  
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

btulloh

Sweet. That's gonna be mighty handy.
HM126

Bruno of NH

Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Southside

Sure would be a lot easier to clean out from under a mill if you could lift it in the air... :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Jeff

I'm extremely jealous.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Peter Drouin

Quote from: Jeff on July 15, 2019, 09:55:15 AM
I'm extremely jealous.

I been jealous of that new barn you just put up too, With heat lights, a kitchen a fridge, stove.
:D :D ;)
  But now It will need a roof, Wonder where I can get some lumber? ;D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Jim_Rogers

Quote from: Peter Drouin on July 15, 2019, 07:01:36 PM
Quote from: Jeff on July 15, 2019, 09:55:15 AM
I'm extremely jealous.

I been jealous of that new barn you just put up too, With heat lights, a kitchen a fridge, stove.
:D :D ;)
 But now It will need a roof, Wonder where I can get some lumber? ;D
I think there is a sawmill near by you. I can get you his number if you need it. :D
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Peter Drouin

 

 

 

 

 

8) 8) dancing-jack usflag smiley_fiddler smiley_thumbsup
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

thecfarm

Looks good. 
I would be using that for my tractors.  ;D
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Jeff

Quote from: Jeff on July 15, 2019, 09:55:15 AM
I'm extremely jealous.
To quote an extremely close acquaintance.  :D :D
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Bruno of NH

Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Dave Shepard

Looks like a good anti theft device,  too. :D
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Jeff

Winter storage! Should be just above the snow.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Peter Drouin

Quote from: Jeff on July 20, 2019, 09:26:37 PM
Winter storage! Should be just above the snow.


There's going to be another bay on the right side of the lift facing the back of the hot rod. I want to free up the lift for my trucks to be worked on.
I'm going to have big windows to let a lot of sunlight in.
A steel bench bolted to the cement floor with a vice on it.
Then I can set up my wire feed welder air tools and torches at the lift bay.

Lumber sales are down from last year. can't sell wood might as well set up a nice garage.
I have a ton of band mills around me now selling lumber at all most what I pay for logs. I know they won't last long, but, It hurts me. have 3 or 4 guys going around on the road sawing too now. Years ago it was just me. And everybody has a small WM in there back yard now. Ross in Maine is doing a good job selling them.
I think it's time to find something else to do. Will see.
Too much work without Ann.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

sawguy21

I understand how you feel. :( That is going to be a great shop to play er work on your new toy.
old age and treachery will always overcome youth and enthusiasm

Thank You Sponsors!