Just picked this up

[woodsdog2015]

thanks

[woodsdog2015]

Ok so an update on this 8800 too.  I took it apart enough to where I could get most of it cleaned up.  I also took the oiler off and I'm not certain I have the orientation of the thrust washer and other associated parts on right.  Holmen Tree do you have any other photos or visuals of the 540 or better yet the 8800 that has the sprocket side? 

[HolmenTree]

I think someone posted earlier in this thread of an IPL on this saw.

[woodsdog2015]

Ok so an update on this 8800 too.  I took it apart enough to where I could get most of it cleaned up.  I also took the oiler off and I'm not certain I have the orientation of the thrust washer and other associated parts on right.  Holmen Tree do you have any other photos or visuals of the 540 or better yet the 8800 that has the sprocket side?

Ok so I finally got the 8800 all cleaned up and set up with a new ring sprocket, gas and oil tank gaskets(the original cork ones were leaking),  and a new 20" Oregon chain and bar.  FYI the D196 configuration is what best fits this saw.  Seems to be oiling nicely and running beautifully.  I haven't cut wood with it yet though that's the next step after deer season.  Thanks for all your help on here.[