iDRY Vacuum Kilns

Sponsors:

Well Pressure Issues

Started by LeeB, September 15, 2021, 06:02:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

LeeB

The connection from the pressure tank to the main line is reusable pex so I disconnected it there and rigged up a hose from the tank to the bathtub fill spigot and back flushed from there. I wasn't able to get the kitchen that way but got pretty much every thing else. I also reset the pressure switch to 40/60 psi. It's better but still not great. May be all I'm going to get out of it. Didn't see much if any sediment coming out of the line when I flushed but there had to be some because it plugged the bedroom toilet fill line. Had to unplug that one. I'm going to give up on it for now. I may try to get some scale remover in the lines at some point and see if that helps if it gets worse again.
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

Thank You Sponsors!