iDRY Vacuum Kilns

Sponsors:

A Little History , Spike60 on small saws a FEW years ago :)

Started by weimedog, April 22, 2023, 12:19:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

weimedog

Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

DHansen

Not saying anyone looks younger or anything :D, but how long ago did you shoot the video?  Thanks for sharing.  

Spike60

I don't know what's worse, the 10 years or the 10 pounds.  :'(
Husqvarna-Jonsered
Ashokan Turf and Timber
845-657-6395

DHansen

The tractor that showed up sure aged well, that's a real beauty.   

DHansen

Watched a more recent video of you two running a couple Husqvarna 154 models.  Did the 154 only come stock with the small decal on the starter housing?  And once the switch to the large decal housing on other saws did that mean they all had air injection filtration?

Spike60

Hey Dave. Yes to all 154's and early 254's on the small decal. Yes also to the air injection coinciding with the large decal. Flywheel side of the crankcase was different to accommodate the air injection bits, and was shared with the 257 and 262. Other parts that changed were the starter pulley and air conductor. 
Husqvarna-Jonsered
Ashokan Turf and Timber
845-657-6395

Thank You Sponsors!