iDRY Vacuum Kilns

Sponsors:

Ok so I bought one of these

Started by BUGGUTZ, June 05, 2015, 06:57:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

bandmiller2

That mill looks homemade with some Belsaw parts and is setup to run with just about any standard rotation engine. If your planning to do a lot of cutting a diesel will save you money on fuel. If your just dubbing around for yourself a gasoline engine will do the deed. Be sure your arbor is attached well as you don't want those parts breaking loose. Frank C.
A man armed with common sense is packing a big piece

BUGGUTZ

Thanks Frank, I agree it looks to be a Belsaw carriage on a bunch of custom built frame. Seems to be well built. I know the blade did not have much use. All the teeth are excellent never been touched. Im looking for an engine and will update when shes cutting.

I do have a Cummins 6BT in a rusted out dodge. Maybe I can find a pto.
Everyone has to be somewhere.

Thank You Sponsors!