- Welcome to The Forestry Forum.
How are things going?
Recent posts
#1
Sawmills and Milling / Re: Ride along chair for 2016 ...
Last post by beenthere - Today at 01:22:37 PMPeter
If the pic is in your gallery, then you can click on it and then scroll down to the next to bottom line. Click that BBcode normal line, it will highlight, and you can copy it and paste it in your post.
Looks like this using a pic from your gallery
If the pic is in your gallery, then you can click on it and then scroll down to the next to bottom line. Click that BBcode normal line, it will highlight, and you can copy it and paste it in your post.
Looks like this using a pic from your gallery
#2
Forestry and Logging / Re: Maintaining the state park...
Last post by beenthere - Today at 01:17:55 PMlivemusic
A new blade for the hackzall should get you back in business.
A new blade for the hackzall should get you back in business.
#3
General Board / Re: Help with a dig pattern.
Last post by Magicman - Today at 01:14:28 PMQuote from: Jeff on Today at 10:30:10 AMSo far, no sign of coming up.OK, I forgets about da Glaciers. PatD's are just coming back from da deer nubbin them off.
#4
General Board / Re: Help with a dig pattern.
Last post by beenthere - Today at 01:12:41 PMI'd like it if the deer loved, or even paid attention, to my hosta plants. I'm trying an experiment to train them by draping a piece of rubber roofing over them with a 5" hole cutout. May work, and may not.
#5
Forestry and Logging / Re: Maintaining the state park...
Last post by barbender - Today at 01:05:38 PMAndries, relating the proper size of Ash pole to a hockey stick is very Canadian of you😂
#6
Sawmills and Milling / Re: OldJarheads Milling Thread...
Last post by OlJarhead - Today at 12:32:48 PMThanks
1. Yes I disconnected the wires to test for continuity.
2. Battery voltage starts around 12.65 off the solar panel and drops to around 12.5 or so.
3. Battery voltage at 11.9-12.x (low) was after starting the engine without the alternator working.
4. When alternator is working (now) the voltage at battery shows 14.79v which is inline with what WM tells me there should be.
The battery is old so it may need to be replaced but at least now, the alternor is charging.
On the light, I agree. It should come on until the alternator starts to charge then go out so that's a little strange and needs further testing.
Cheers!
1. Yes I disconnected the wires to test for continuity.
2. Battery voltage starts around 12.65 off the solar panel and drops to around 12.5 or so.
3. Battery voltage at 11.9-12.x (low) was after starting the engine without the alternator working.
4. When alternator is working (now) the voltage at battery shows 14.79v which is inline with what WM tells me there should be.
The battery is old so it may need to be replaced but at least now, the alternor is charging.
On the light, I agree. It should come on until the alternator starts to charge then go out so that's a little strange and needs further testing.
Cheers!
#7
Sawmills and Milling / Re: board edger for dried lumb...
Last post by scsmith42 - Today at 12:26:23 PMI use a 15hp Woodmizer twin blade edger to edge dry lumber into flooring blanks for the moulder. It does a fine job.
#8
The Outdoor Board / Re: Coyote takes a dirt nap
Last post by JD Guy - Today at 12:11:56 PMWell, I don't believe there's a coyote season here but if they're harassing my wife's chickens they die 
#9
Sawmills and Milling / Re: Did something dumb today.
Last post by GAB - Today at 12:03:33 PMQuote from: firefighter ontheside on Today at 10:37:49 AMTom, that's just bad luck. What are the odds?With his luck, or lack there of, the odds are pretty good.
GAB
#10
Sawmills and Milling / Re: Sawing Project 2024
Last post by stanwelch - Today at 12:01:18 PMAnother GREAT project. Thank you Nathan and Robert for the excellent videos and Jake —
You are a great host. Thanks for allowing us to invade your space for a little while
Shout out to Jeff for the Forum that has given us the opportunity to meet and share with friends
Stan
Thank you Nathan and Robert for the excellent videos and Jake —You are a great host. Thanks for allowing us to invade your space for a little while
Shout out to Jeff for the Forum that has given us the opportunity to meet and share with friends
Stan
