iDRY Vacuum Kilns

Sponsors:

My mill is sick

Started by WV Sawmiller, April 24, 2019, 09:04:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

SawyerTed

I appreciate you sharing this experience start to finish.  I'm learning a lot by reading this thread and comparing to my owner's manual and my mill.
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

WV Sawmiller

SS,

   I will find out if/when it happens again.
Howard Green
WM LT35HDG25(2015) , 2011 4WD F150 Ford Lariat PU, Kawasaki 650 ATV, Stihl 440 Chainsaw, homemade logging arch (w/custom built rear log dolly), JD 750 w/4' wide Bushhog brand FEL

Dad always said "You can shear a sheep a bunch of times but you can only skin him once

terrifictimbersllc

SS-does the LT70Super have the same liability as the LT35 (single post mast both), with respect to changing the cam follower bearings?  

Bigger they come the harder they fall?  :o :o :o
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide 55 Yanmar,  LogRite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Southside

TT -

I have only peeked at the cam followers on my 70 and actually only spotted one of them.  There is a whole lot of "stuff" in and around there so I am not sure how it's all put together.  
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

SawyerTed

No need to "borrow trouble"......
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

Bluejay27

The 70 super has one cam follower and bracket toward the front and a second bracket with two cam followers at the rear. The rear bracket has a pivot so both apply pressure evenly. And the cam followers are the same 1-1/2"
'98 Wood-Mizer LT40HDD42 Super, '08 LT40HDG28, '15 LT70HDD55-RW, '93 Clark GPX25 Forklift, '99 Ford F550

Southside

Top and bottom the same?
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Crossroads

Glad you got if figured out and are back to making sawdust. 
With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer

WV Sawmiller

   I can definitely say I now know a whole lot more about the design and operational features of my mill. I also learned if you knock the set off the bottom teeth your blade wants to climb which might be a handy reminder/troubleshooting tool for others to remember.
Howard Green
WM LT35HDG25(2015) , 2011 4WD F150 Ford Lariat PU, Kawasaki 650 ATV, Stihl 440 Chainsaw, homemade logging arch (w/custom built rear log dolly), JD 750 w/4' wide Bushhog brand FEL

Dad always said "You can shear a sheep a bunch of times but you can only skin him once

Thank You Sponsors!