iDRY Vacuum Kilns

Sponsors:

Wood-mizer lt40 question

Started by RedRebel, June 25, 2020, 12:36:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

RedRebel

June 25, 2020, 12:36:38 PM
I have a 2004 lt40 with the nissan CG engine. The wiring harness from the electronic governor melted on me. I pulled the wiring one at a time to hard wire them together. I thought I got it right but now it wont rev up when I turn the blade on. I can't find any pictures of the harness or the wiring schematics. I called wood-mizer they couldn't help. The schematics they sent me were wrong. 

ladylake

#1
June 25, 2020, 01:54:12 PM
\


   If the electronic  governor caused  the wires to melt it's most likely shot.  Steve
Timberking B20  18000  hours +  Case75xt grapple + forks+8" snow bucket + dirt bucket   770 Oliver   Lots(too many) of chainsaws, Like the Echo saws and the Stihl and Husky     W5  Case loader   1  trailers  Wright sharpener     Suffolk  setter Volvo MCT125c skid loader

RedRebel

#2
July 12, 2020, 12:10:11 PM
Does anyone have any pictures of this harness?
Print
Go Up Pages1
User actions

Thank You Sponsors!