iDRY Vacuum Kilns

Sponsors:

Lubemizer leaking

Started by Dan_Shade, January 08, 2020, 07:58:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dan_Shade

I'm assuming that I have a bad check valve in the lubemizer tubing, because it constantly flows. 

I'm not sure how it is supposed to be plumbed up with the check valve direction. 

Does anyone have a diagram? 
Woodmizer LT40HDG25 / Stihl 066 alaskan
lots of dull bands and chains

There's a fine line between turning firewood into beautiful things and beautiful things into firewood.

PAmizerman

I replaced the check valves in mine. I don't recall the direction but I'll try and remember to look tomorrow if I get time.
Woodmizer lt40 super remote 42hp Kubota diesel. Accuset II
Hydraulics everywhere
Woodmizer edger 26hp cat diesel
Traverse 6035 telehandler
Case 95xt skidloader
http://byrnemillwork.com/
WM bms250 sharpener
WM bmt250 setter
and a lot of back breaking work!!

PAmizerman

There should be an arrow on them which is the direction of flow.
Woodmizer lt40 super remote 42hp Kubota diesel. Accuset II
Hydraulics everywhere
Woodmizer edger 26hp cat diesel
Traverse 6035 telehandler
Case 95xt skidloader
http://byrnemillwork.com/
WM bms250 sharpener
WM bmt250 setter
and a lot of back breaking work!!

Dan_Shade

I'll just order both check valves

One of mine had a sticker showing direction, but it fell off. 

I guess the loop is to keep the pump from deadheading. 
Woodmizer LT40HDG25 / Stihl 066 alaskan
lots of dull bands and chains

There's a fine line between turning firewood into beautiful things and beautiful things into firewood.

Thank You Sponsors!