iDRY Vacuum Kilns

Sponsors:

Haven't done this in years

Started by cutterboy, March 07, 2021, 07:18:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cutterboy

I dropped a good sized red oak a few days ago at the edge of a field and cut it into 16" lengths. Since the rounds were so heavy I decided to quarter them right there in the field to make it easier to transport them to the barn. Now, I have split very little wood with a splitting maul since I bought my wood splitter 18 years ago but I found my old maul and a couple of rusty steel wedges and went to work.


 

 

 

 

 
Now I remember why I bought a wood splitter!

Happy splitting.....Cutter
To underestimate old men and old machines is the folly of youth. Frank C.

mike_belben

Why didnt you mill that beautiful log?
Praise The Lord

thecfarm

Them are still good sizes pieces.
I have split 4 foot beech with a maul and 4 iron wedges. Sometimes I would have all 4 wedges into the wood and still not split. But it did make good firewood.  :)
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Tacotodd

Good firewood AND a good work out! 

I just tore my rotator cuff I "think" from hand splitting, because I'm not a 20yo anymore. Oh the days I was.
Trying harder everyday.

doc henderson

when I lived in Albany, had a fireplace in my apartment.  I lived at twin oaks apartments.  they were clearing land up the road for an office complex, also called twin oaks.  they fell a bunch of oak trees.  and I would go get a few rounds on the weekends.  about 30 inches.  I could only get 2 at a time in my Bronco 2.  accumulated about 18 of them and on the weekend, would go out and split.  had a 6 and 8# maul.  took about 20 hits to get the first split across.  then it was easy to pop a triangle off the end, and work around the half.  good workout.  could only do 1 or 2 at a time.  the neighbors thought they lived next to the "Beverly hillbillies".  I told them, no I am from Kansas.   smiley_hillbilly_tub_base smile_banjoman smiley_chop smiley_fiddler smiley_beertoast :)
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

hedgerow

Have a BIL that is 65 and has always split his firewood by hand and still does. He burns around five cord a year. He probably has 10 years split and piled in his barn. After a couple shoulder surgery's I wouldn't even thing about swinging a maul. 

cutterboy

Quote from: mike_belben on March 07, 2021, 07:27:05 AM
Why didnt you mill that beautiful log?
Mike, that tree was leaning pretty badly into the field and was under so much stress it wouldn't have made good lumber. Look carefully at the first picture and you will see at the lower left hand corner a crack running up the tree. That crack went all the way through the tree and was caused by  stress. That crack did make it easy to split the first few rounds. ;D I have plenty of nice straight red oaks I can cut down for lumber. In fact I'm going out this morning to drop two of them.
To underestimate old men and old machines is the folly of youth. Frank C.

gspren

I like to split a few pieces with a splitting maul each year just to show myself I still can. I don't need to do very many pieces anymore before I declare that I still can.
Stihl 041, 044 & 261, Kubota 400 RTV, Kubota BX 2670, Ferris Zero turn

cutterboy

gspren, us old guys still have got it! ;)
To underestimate old men and old machines is the folly of youth. Frank C.

Dave Shepard

Unless I see a seam across a big diameter chunk, I go around the outside. I'm splitting some cherry right now that you just have to wave the maul in a threatening manner and it falls apart. 
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Southside

@doc henderson was that Kansas Oak that happened to be growing in New York by chance?   :D  :D  :D
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

doc henderson

ha ha ha, how would I know, that was before the FF.  I did not have "friends"  like you to tell me when I was wrong!   :) :) :).  
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

doc henderson

Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

Tacotodd

@doc henderson that would be my kind of answer. Quit doing that! I thought that I was the only uneducated tree 🌲 person around until my friend taught me what little that I've been able to absorb from him. I'm still SLOWLY learning, DanGit! 
Trying harder everyday.

SwampDonkey

Most all my wood is split by maul. Why? 1) It's a good Collins maul, 2) I don't have to drag wood through mud or load a trailer which adds $$ to the cost of the operation for equipment, 3) I can load and forward and when it gets to the house I can pile it right away, 4) no leave tree damage. I bring every tree to the ground with a chainsaw. Yes, one may fall into another once in awhile, but a chainsaw will still bring it down with out putting your life in danger and not having to cut other trees to do it. You cut the 'feet' out from under it, it'll come down. I guarantee it. ;D And now I have a nice man sized trail to carry the bucked/split pieces out to the SxS and tree length away. ;)

Yes, I do have a wood splitter. Rarely used. You still have to bend down and pick up wood twice. Hand split, I pick it up once. The rest of the steps are the same. ;D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

breederman

I've been cutting and splitting a little bit by hand the last few weekends. It splits easy when its frozen. Looking at the forecast maybe the snow in front of the shed will melt enough to get the splitter out next weekend.
Together we got this !

Spike60

Probably do a 1/4 of my splitting by hand; the rest with the splitter. Good excersize, and in addition to proving that you can still do it, it keeps you in shape from losing the ability to do it. I see so many older guys come in the store that have lost the ability to even start a saw let alone swing a maul. The old "use it or lose it" deal for sure. Always affects the more occasional users. Regular users that stay active generally have no problems at all.
Husqvarna-Jonsered
Ashokan Turf and Timber
845-657-6395

cutterboy

Spike, very true. Use it or lose it!
To underestimate old men and old machines is the folly of youth. Frank C.

Al_Smith

Green cut oak normally splits easily .Just depends on the job with a splitter .If it's a tip up and can be positioned next the work it's fairly easy to just roll the rounds in place .If not remember a chainsaw can rip cut too .Noodle a big round an inch or two deep then lay into it with the wedges using a big sledge .I own a couple of mauls but prefer a 5 pound actual splitting exe when it comes to that .Other than that I let the machinery, saw or splitter do most of the work  .I'm still strong for my age but I' m not a spring chicken anymore either .My mind might think I'm still 30 but my bod reminds me I'm 73 every so often .

Tacotodd

And the noodles make a great fire starter!
Trying harder everyday.

doc henderson

Quote from: Al_Smith on March 09, 2021, 08:08:44 AM
My mind might think I'm still 30 but my bod reminds me I'm 73 every so often .
Me too and I am only 60!   8)   :o   :D :D :D
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

Al_Smith

It doesn't get any better sorry to say . :(

Thank You Sponsors!