iDRY Vacuum Kilns

Sponsors:

Stihl MS250

Started by GE, June 16, 2017, 12:48:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

GE

Having trouble with my saw. It will start momentarily then dies. I have replaced the fuel line, fuel filter, air cleaner and plug with the same results., any suggestions?

dougand3

Next would be clean and rebuild kit the carb OR buy a new carb. They cost ~$10 online and have Hi & Lo screws to adjust.
Husky: 372xt, 272xp, 61, 55 (x3)...Poulan: 315, 4218 (x3), 2375, 2150, 2055, 2000 (x3)...Stihl 011AVT...Homelite XL...Saws come in broken, get fixed or parted, find new homes

GE

Thanks, that's the direction I was headed!

blueberrymuzik

Before you get too deep into the carb, take a look at the impulse line running from the engine to the back side of the carb mount. That impulse is what causes the carb to pump fuel when you are not in the choke position. It may be cracked or have simply come off at either end.

Thank You Sponsors!