Author Topic: Skidder chains (Read 7190 times)

David_c · « **on:** July 18, 2005, 09:34:30 AM »

I need to buy some tire chains for my skidder and just wondering what you guys use and like best, ring chains, diamond, double diamond? and why you like them? also best places to buy them? Thanks

leweee · « **Reply #1 on:** July 18, 2005, 10:49:43 AM »

Try this site http://www.labonville.com/

there so expensive...how could I have a favourite

Sawyerfortyish · « **Reply #2 on:** July 18, 2005, 12:40:33 PM »

Just bought a set of ring chains from the Timberjack dealer. I didn't think they were to badly priced between 8 and 900.00. Considering how much the cost of steel has gone up theres a lot of metal in these chains.

OLD_ JD · « **Reply #3 on:** July 18, 2005, 02:29:04 PM »

i try to don't use chain as much i can $:-\$ ..but on winter whene ice cover everyting i prefer the studded $:-\$

Ed_K · « **Reply #4 on:** July 18, 2005, 04:42:13 PM »

I have ring chains on mine. When they wear out they will be replaced with dimond and a half ice chains.

David_c · « **Reply #5 on:** July 18, 2005, 09:24:39 PM »

Thanks for your replies guys. what do you guys think of these. the guy didn't really give me any info except they are case hardened rockwell 56 for 1084.99 deliverd without warrenty. or 1334.99 with warrenty

www.tirechain.com/skidder-chain.htm

best link i could give there the double diamond

tiny3 · « **Reply #6 on:** July 19, 2005, 04:52:19 AM »

hi
ive ran the ring type for a while now,seem to be pretty good

Sawyerfortyish · « **Reply #7 on:** July 19, 2005, 06:43:43 AM »

Whatdaya need a warrenty for you run em til there scrape. Always run the ring chains til they almost have no grips left on the ring then get out the welder and small peice of rerod and weld new grips on top of the old ones. then run em til they keep breaking and make you mad

. Then go get new ones

David_c · « **Reply #8 on:** July 19, 2005, 10:07:50 AM »

I know i wouldn't buy the warrenty but it is nice to have incase chains really aren't good. say put them on go out and they just come apart.

not that that would happen but i know nothing about there quality. anyone know if they make a good chain?

beenthere · « **Reply #9 on:** July 19, 2005, 11:32:52 AM »

I'd be real surprised if the company would risk their reputation sending out anything but 'good' chain. Likely the warranty cost is just to cover the Shipping/Handling of another set.
I purchased from this company, and have only heard good reports about them. They were very helpful and informative about getting me some cable chains for a trip out West last winter. Never needed them, but that is okay. Maybe I'll have better luck next time.

Any of our sponsors, like Bailey's, have skidder-tire chains?

David_c · « **Reply #10 on:** July 19, 2005, 12:04:13 PM »

beenthere Thank you just the info on them i was looking for. I wasn't suggesting they would do that intentionally. just that they might be selling an inferer quality chain becuase theres is several hundred less. and you are right about the helpfulness as i exchanged several emails with them last night after asking for info. very quick responses. oh those prices i gave where the cost with shipping which is $165.

Rob · « **Reply #11 on:** July 23, 2005, 02:14:43 PM »

Hey David ,

Looking into getting some chains on the ole' TJ .. Go to BB Chain in Milford , NH it's not to far from you , they're in the same building as Chappel Tractor downstairs.. Good guys to deal with and they will treat you right , and they have very good chains... We just bought a set for the 545 for the winter Babac chains , a little $$$$ but a very good chain.. A little advice on selection , run rings on the front tires and diamonds on rears works best here in NH..Best of both worlds in my opinion.Rings work good in mud etc and the diamonds in the rear bite good in snow and ice especially..Good luck David

Rob

David_c · « **Reply #12 on:** July 23, 2005, 03:22:16 PM »

Thanks Rob! do you know how much for the babac at B&B i already plan to get them. but if there cheaper at B&B i will get them there.

Rob · « **Reply #13 on:** July 23, 2005, 03:55:58 PM »

Hey David ,

I dont know of the top of my head as the company bought them not myself , I just went to pick them up..Give them a call they will help you out

David_c · « **Reply #14 on:** July 23, 2005, 06:04:52 PM »

you had to pick up? the place i plan to buy from will deliver them here or jobsite or wherever i want. delivery is included in price. actually it is part of babac's deal, free delivery.

Rob · « **Reply #15 on:** July 23, 2005, 06:31:33 PM »

David ,

I picked them up because I had to go to NH Hydraulics in Nashua anyways so I was already there just about.Otherwise they would have been delivered to our shop..

David_c · « **Reply #16 on:** July 23, 2005, 07:48:47 PM »

oh ok i see

Coot · « **Reply #17 on:** July 27, 2005, 02:55:01 PM »

Personally i like the double diamond style . there is a local fellow that has a homemade tractor powerd with a pacer motor $:-\$ but nonethe less he runs a double diamond style chain on his tires and has amazing results

Buzz-sawyer · « **Reply #18 on:** July 27, 2005, 03:00:33 PM »

Coot tell me more about that home made AMC tractor..multiple tranny's

tires....Got a pic by any chance

Coot · « **Reply #19 on:** July 27, 2005, 05:03:18 PM »

sorry buzz no pics , but i can try and get some , its really neat to see , the motors a pacer like i said 4 wheel drivewith home made lockers i belive it has 4 gears goes just as fast in foward as reverse. for tires they are 15" mud tires and when its really icy he brings out the chains , like i had described before

anything more u wanna know

Forestry ForumSponsored by:

Author Topic: Skidder chains (Read 7190 times)

Forestry Forum
Sponsored by: