iDRY Vacuum Kilns

Sponsors:

boxelder slab

Started by shelbycharger400, August 16, 2011, 09:16:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

shelbycharger400

what is the general value of boxelder slabs.
I have about 7 dry now,   all live edge, 5ft, 9 in long,  3 inches thick,  minimum width is 15, maximum is 27,    basically the stump was plain sawn, so i have nice edges.
I plan to sell one to a guy at work, he needed one with 17 in + at the minimum,  so that means my #3 or #4 board, wich are all 20 + wide, but not as much pink/red/orange in the center of the stump cuts.   i already paid last year to have it cut, $50 on a circle mill.  and i have fuel costs getting the log, whereas it was 30 miles one way.

Thank You Sponsors!