Forum > WoodMaxx Blades from KASCO SharpTech
tension on Kasco bands
(1/1)
kelLOGg:
I have a Cooks MP32 with no gauge but a compression spring for tension. I want to use the caliper method for setting/checking tension but need to know what the reading should be. I am using Kasco bands 0.045" thick, 4°, 1.25" wide. Thanks.
Cutting Edge:
kelLOGg
.0035"-.004" using a 6" caliper opened to 5-1/2" +/-
Should give you approx 20,000-21,500 lbs/strain on the blade
Hope this helps ya out
kelLOGg:
Thanks!
Navigation
[0] Message Index
Go to full version