iDRY Vacuum Kilns

Sponsors:

372 XP clones gas and oil caps?

Started by Satamax, August 19, 2022, 03:26:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Satamax

Hi everybody. 

I have a three years old holzforma 372. And since day two, i've been annoyed by the leaky gas and oil caps. 

Did you have the same issue?  What was your fix? 

Thanks a lot guys! 
French CD4 sawmill. Latil TL 73. Self moving hydraulic crane. Iveco daily 4x4 lwb dead as of 06/2020. Replaced by a Brimont TL80 CSA.

Spike60

Simple fix ought to be to get a couple OEM Husky caps. The seals/o-rings on some of the aftermarket caps are often too hard to provide a tight seal.
Husqvarna-Jonsered
Ashokan Turf and Timber
845-657-6395

Satamax

I'll have to look into that. Thanks a lot.

I was wondering if anybody had changed the o rings.
French CD4 sawmill. Latil TL 73. Self moving hydraulic crane. Iveco daily 4x4 lwb dead as of 06/2020. Replaced by a Brimont TL80 CSA.

Kelly B

I'd go buy OEM o rings and install on caps that should cure the issue.mine leak a tiny bit as well. I plan on doing the same thing.....


Satamax

French CD4 sawmill. Latil TL 73. Self moving hydraulic crane. Iveco daily 4x4 lwb dead as of 06/2020. Replaced by a Brimont TL80 CSA.

Thank You Sponsors!