Sponsors:

Sawmill satisfaction poll

Started by Jeff, November 29, 2003, 10:18:56 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Bibbyman

Wood-Mizer LT40HDE25 Super 25hp 3ph with Command Control and Accuset.
Sawing since '94

Jeff

I had to add an option for me, I dont own a mill. :D
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Corley5

To change do I have to get rid of what I've got now or can I just add to my inventory? ;D
Burnt Gunpowder is the Smell Of Freedom

Fla._Deadheader

All truth passes through three stages:
   First, it is ridiculed;
   Second, it is violently opposed; and
   Third, it is accepted as self-evident.

-- Arthur Schopenhauer (1788-1860)

Jeff

Why?  You got a home-mizer. If you could change would you? Its perty easy.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Fla._Deadheader

ohhhhhhhh  I side wiff Corley5, I just wanna diffarunt kind, and keep this 'un too ::)

  
All truth passes through three stages:
   First, it is ridiculed;
   Second, it is violently opposed; and
   Third, it is accepted as self-evident.

-- Arthur Schopenhauer (1788-1860)

kentuckyboy


smwwoody

I want same builder differnt type   ???
where do I vote   ???
Full time Mill Manager
Cleereman head rig
Cooper Scragg
McDonugh gang saw
McDonugh edger
McDonugh resaw
TS end trim
Pendu slab recovery system
KJ4WXC

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

hiya

Have a homemade band and am working on a horzonal circle. Something on the order of a swing, Buuuttt it don't swing
RichardinMd.

MemphisLogger

BIGGER

MORE ORANGE

and

less rust

 ;D
Scott Banbury, Urban logger since 2002--Custom Woodworker since 1990. Running a Woodmizer LT-30, a flock of Huskies and a herd of Toy 4x4s Midtown Logging and Lumber Company at www.scottbanbury.com

pasbuild

Happy with the mill I just need to get rid of that Honda 20 that just will not run right.
If it can't be nailed or glued then screw it

Brian_Bailey

I would like to add a Meadows #2 portable circle mill for cutting that snotty softwood siding.  Keep the Mizer for the high quality hardwoods.
WMLT40HDG35, Nyle L-150 DH Kiln, now all I need is some logs and someone to do the work :)

Paul_H

I really want to add a band resaw.Well built and dirt cheap.

Free would be ok,too
Science isn't meant to be trusted it's to be tested

isawlogs

A man does not always grow wise as he grows old , but he always grows old as he grows wise .

   Marcel

Stan

Jeff, run down to the hardware and pick up one of them gadgets that use a 2x4 to guide your chainsaw. You don't have to use it, but then you can vote that you want a better mill.  8)
I may have been born on a turnip truck, but I didn't just fall off.

Jeff

Stan, the mill I run everyday sure cuts wood, but it aint mine but it thinks it is. Every time I leave it for a day to somebody else it throws a fit.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

RevCant

How about this for fantasy land.  A Peterson type swinger that is actually made in the USA mounted on a trailer with WM type hydraulics for log loading.  

If cows could only tail....

Brian_Bailey

Hey RevCant,  

Fantasy land is only a few hundred miles north of ya.  

www.doublecut.com
WMLT40HDG35, Nyle L-150 DH Kiln, now all I need is some logs and someone to do the work :)

Frank_Pender

Well, I just voted. ;D  What do you think I said?  Right!!!!!  I am not changeing.  I woon will have Mobile Dimension Mills in my possession.  "Yeow, Wow", as Sam the Firefly once said.  Besides, if I need someing that I am unable to dow with any one of the three or am too lazt, I just get Loren to do it for me. :D :D
Frank Pender

DanG

I wouldn't switch from Mobile Dimension, but I'd like to add a bandmill someday, to do the stuff that is difficult now.  Every type has its limitations, so the more types you have, the less limitations you have. :)
"I don't feel like an old man.  I feel like a young man who has something wrong with him."  Dick Cavett
"Beat not thy sword into a plowshare, rather beat the sword of thine enemy into a plowshare."

Bill_B

I don't have a mill but my brother has a procut chainsaw mill that we used last summer.
Now his son has a lt15. This is a nice mill.
Bill B

dan-l-b


Kevin_H.

Same color, same payments...More Power.
Got my WM lt40g24, Setworks and debarker in oct. '97, been sawing part time ever since, Moving logs with a bobcat.