Do we have one thread where we post pictures of customer's projects?
I thought we did.
If we don't we should start one.
I recently got a couple.
(https://forestryforum.com/gallery/albums/userpics/10095/Lisa_table2.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/Lisa_table8.jpg)
About a week or so ago, I got this one from a fellow who bought some walnut from me to turn a bowl:
(https://forestryforum.com/gallery/albums/userpics/10095/Charlie_walnut_bowl.jpg)
He wanted a photo of the log it came from to show the person who got the bowl. He is a beginner bowl turner. And he knows he's got a lot to learn. He was requested more bowl blanks but will get back to me later on when he has exact details of what he wants.
Jim Rogers
Biibyman started a thread several years back, but I can't remember the name of it.
I love the table!
Its rewarding to see someone build something beautiful with the wood you cut. I've cut some really pretty stuff for folks but I know DanGed well it will rot in a pile. Frank C.
That is a nice bowl.
It is always rewarding to watch a customer's trees go
(https://forestryforum.com/gallery/albums/userpics/20011/2410/DSCN0167%7E0.JPG)
from logs
(https://forestryforum.com/gallery/albums/userpics/20011/2410/DSCN0170.JPG)
to stickered lumber
(https://forestryforum.com/gallery/albums/userpics/20011/3609/DSCN0491.JPG)
and then to wall paneling
(https://forestryforum.com/gallery/albums/userpics/20011/3609/DSCN0492.JPG)
in his new home. :)
I am truly amazed at some of the projects customers build with my (their ;D) wood.
I post many of the projects on my web page (with their permission). Two of my favorite ones are the harp that a customer's dad built for his granddaughter for Christmas, and the "Man Cave" a fellow built for the basement of his new house.
YH
(https://forestryforum.com/gallery/albums/userpics/21488/image%7E28.jpg)
(https://forestryforum.com/gallery/albums/userpics/21488/image%7E29.jpg)
That harp and girl is a very nice picture.
Here are a few pieces made from an old walnut root that had been down for about eight years.
(https://forestryforum.com/gallery/albums/userpics/12837/WlntRoot_01s.jpg)
(https://forestryforum.com/gallery/albums/userpics/12837/WlntRoot_02s.jpg)
(https://forestryforum.com/gallery/albums/userpics/12837/Table_Bowl_01s.jpg)
Logs...
(https://forestryforum.com/gallery/albums/userpics/14448/Ranchsawing3.JPG)
Lumber...
(https://forestryforum.com/gallery/albums/userpics/14448/alittlesyp2a.JPG)
Final use.
(https://forestryforum.com/gallery/albums/userpics/14448/Pughs2.JPG)
(https://forestryforum.com/gallery/albums/userpics/14448/Pughs6.JPG)
(https://forestryforum.com/gallery/albums/userpics/14448/Pughs7.JPG)
After I quit slobbering over the old cars, I noticed a mighty fine building around them.
Quote from: LeeB on January 13, 2014, 10:36:59 AM
After I quit slobbering over the old cars, I noticed a mighty fine building around them.
I had the same problem!
What cars?? ;D
Im sure many of you have seen this, but i have to post again. Logs
(https://forestryforum.com/gallery/albums/userpics/32232/026.JPG) Lumber
(https://forestryforum.com/gallery/albums/userpics/32232/027.JPG)
Partitioned basement
(https://forestryforum.com/gallery/albums/userpics/32232/095.JPG)
https://forestryforum.com/gallery/displayimage.php?album=5http://www.forestryforum.com/gallery/displayimage.php?album=54http://www.forestryforum.com/gallery/displayimage.php?album=5464&pid=150000#top_display_media64&pid=149999#top_display_media464&pid=149998#top_display_media
A few months ago, Jmoore and I sawed a longleaf pine log to provide a little lumber for one of our friends who was teaching an ag mechanics class at a nearby college. He had each of the students plane their boards and build an "A" shaped tool box as a class project using woodworking tools. The boards that were left over were used to build this t.v. shelf in his house. Yesterday he came by to pick up some 2" x 12" s to replace the blue/gray steps seen in the picture. He does not own a table saw, lost most of his right hand in an accident when he was a young man and made all of the cuts with a circular saw. I was impressed. I look forward to seeing the new steps.
Caveman
A customer just sent me in some pictures of a table he made and sold out of a slab of maple I sold him.
And the legs are some pieces of walnut he got from me also.
Here are some of the photos:
(https://forestryforum.com/gallery/albums/userpics/10095/image-1.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/image-2.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/image-3.JPG)
The top was from a tree from Gloucester, MA and the walnut came out of the same log I got the bowl planks from, I think.
This guy has just bought a house with a huge barn in Southern NH, where he will be making furniture in a shop there and selling custom made stuff.
He is going to get more maple slabs from me and make more tables.
When I visit his shop/showroom, I'll take some more pictures.
Jim Rogers
PS. the piece of glass appears to be inlaid so that it is flush with the maple top surface.
Very nice. Thanks for that "PS". My eyes were trying to figure it out. smiley_dizzy
Jim I really like his idea of using the glass pane as a guide to straight line the cut to get best book end match.
Another table by my customer from a red oak slab he got from me:
(https://forestryforum.com/gallery/albums/userpics/10095/image-1%7E0.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/image-2%7E0.jpg)
Interesting.
Jim Rogers
I love butterflies!
(https://forestryforum.com/gallery/albums/userpics/22539/rps20140221_085443_535.jpg)
(https://forestryforum.com/gallery/albums/userpics/22539/rps20140221_085615_198.jpg)
(https://forestryforum.com/gallery/albums/userpics/22539/rps20140221_085615_198.jpg)
(https://forestryforum.com/gallery/albums/userpics/22539/rps20140221_085810_808.jpg) We have been working on this one for several years customer plans on finishing it this spring. I think the rock work is almost done. Its a Outdoor Kitchen lots of curves in the roof.
Wow, just doesn't say enough.
Thanks for posting.
Jim Rogers
redbeard,for once in my life if I went there,I would not be looking to see what was cooking. ;D
That is really nice!!
THAT has to be one of the neatest structures I've ever seen!!! 8)
Wow Nice.
A friend of mine is making some live edge tables from White Bark pine.
These trees were bug killed, one tree I have is over 200 years old and is only 12''
She dose wood burning and has finished on peace and is still working on a table with a whole mtn scene.
They are for sale if any one is interested, 5% go's to the forum or what ever percentage it is.
She say she can do almost any thing. When I get a photo of the table I will post.
(https://forestryforum.com/gallery/albums/userpics/33427/IMAG0456.jpg)
(https://forestryforum.com/gallery/albums/userpics/33427/IMAG0457.jpg)
(https://forestryforum.com/gallery/albums/userpics/33427/IMAG0459.jpg)
(https://forestryforum.com/gallery/albums/userpics/33427/IMAG0460.jpg)
(https://forestryforum.com/gallery/albums/userpics/33427/45112_693224977394901_253362587_n.jpg)
(https://forestryforum.com/gallery/albums/userpics/33427/1604894_693225010728231_1358715476_n.jpg)
I like them all.
Both redbeard and MT406's projects are very artistic to say the least. :)
Our local game processor was at the house and asked what I did with this stuff and that he wanted a bunch of it for putting a rustic look on his shed. Between this and probably a couple elk sheds it looks to me like my elk is getting cut up for free again. Everyone's happy. ;D
He told me a few folks have stopped wanting to take pictures and his wife likes it enough that she wants a fence to suit it.
Allan
(https://forestryforum.com/gallery/albums/userpics/31630/005%7E8.JPG)
Wow! some nice work that's for sure.
Makes me want to pick up a hammer... wish I knew how to use one like those fellas! :-\
WoW! These are some really cool pictures. :)
YAHOO !! What a bunch of terrific projects. The outdoor kitchen is stunning... 8)
Cut some ERC not long ago, the customer put it to use as a chest and sided the interior of a room for clothes and hunting gear storage.
(https://forestryforum.com/gallery/albums/userpics/31415/alex_board%7E2.JPG)
(https://forestryforum.com/gallery/albums/userpics/31415/alex_chest%7E3.JPG)
(https://forestryforum.com/gallery/albums/userpics/31415/alex_room_1%7E1.JPG)
(https://forestryforum.com/gallery/albums/userpics/31415/alex_room_2%7E1.JPG)
Very nice.
Not really a customer but a really good friend. He's a heavy equipment operator and is always getting logs for us so I cut lumber for him in exchange for some logs. He and I went to high school together back in Northern New York and didn't know until a few months ago we were living a half a mile apart here in Alaska. I cut a bunch of his spruce logs and few cedar poles (the 6x6's) for this car port on the rental they just bought. He used to have a big circle mill back east and has taught me a lot about sawing.
(https://forestryforum.com/gallery/albums/userpics/21968/2014-05-24_20_19_16%7E0.jpg)
Nice. Congrats also on "finding" your friend. :)
I resawed some old oak timbers for a customer who wanted them squared to 6x8 so he could crosscut them on his miter saw. Said he was going to tile a floor with them. Last night he emailed me a picture of his finished floor. How neat is that?
(https://forestryforum.com/gallery/albums/userpics/33443/IMG_1137.jpg)
Quote from: Jim_Rogers on January 16, 2014, 09:20:20 AM
A customer just sent me in some pictures of a table he made and sold out of a slab of maple I sold him.
And the legs are some pieces of walnut he got from me also.
Here are some of the photos:
(https://forestryforum.com/gallery/albums/userpics/10095/image-1.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/image-2.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/image-3.JPG)
The top was from a tree from Gloucester, MA and the walnut came out of the same log I got the bowl planks from, I think.
This guy has just bought a house with a huge barn in Southern NH, where he will be making furniture in a shop there and selling custom made stuff.
He is going to get more maple slabs from me and make more tables.
When I visit his shop/showroom, I'll take some more pictures.
Jim Rogers
PS. the piece of glass appears to be inlaid so that it is flush with the maple top surface.
If you look back to this post, and see the table with the piece of glass in it, I'll tell you a story about it.
A lady came to see me about getting some lumber for a fence or something like that. And she saw the round edge pieces of pine boards that I was stacking up to be edged later on into regular square edge lumber.
She asked me what was going to happen to these pieces. I told her.
She said she saw online somewhere a table that had a piece of glass in-laid between two pieces of round edge slabs.
I told her I knew of this table as one of my customer's made it.
She called it a "river" table.
She said the two round edge pieces made the "banks" of the river and that the glass was the water.
She said she was an artist and she was always doing some different things with wood.
Later that day she called me again and wanted to come back and buy some of the round edge pieces to make up a table top.
She did and I sold her some.
I haven't seen the finished product but I thought it was an interesting story.
Jim Rogers
RPowers, thats impressive! Talk about time consuming but what a great end result.
QuoteLast night he emailed me a picture of his finished floor. How neat is that?
Looks very good.. at least when brand new.
Time will tell how happy they will be after a couple years of normal traffic, use, maintenance and the shrinking and swelling that will take place. Hope they will still be happy with their wood block floor. ;)
excellent....
Would it be possible to get information from your friend on the adhesive, caulking, and finish he decided on.Tell him I think his job looks great ! ;D Get him to join the FF ! Rob
Flooring done by one of my customers (have to click to start the video, and wait for the commercial to end):
http://www.wfsb.com/story/22515479/glastonbury-man-builds-home-out-of-fallen-trees
Fun video Terrific...Is that you piloting the Woodschmoozer ?
Neat? It's way beyond that.
Quote from: tule peak timber on August 14, 2014, 01:07:30 PM
Fun video Terrific...Is that you piloting the Woodschmoozer ?
Yep, check out the log bouncing right onto the arms instead of onto me! ::) ::) ::) smiley_bouncing smiley_bouncing smiley_bouncing
Very Nice, love the contrast in that wide maple, and the ambrosia baseboards!
Quote from: terrifictimbersllc on August 14, 2014, 01:00:04 PM
Flooring done by one of my customers (have to click to start the video, and wait for the commercial to end):
http://www.wfsb.com/story/22515479/glastonbury-man-builds-home-out-of-fallen-trees
Nice story. Thanks for sharing.
Jim Rogers
Here's a couple of pics of an outdoor table that a customer made from Eucalyptus timber we were milling, these were a couple of slabs I through aside, they thought they had a better use and I have to agree!!
(https://forestryforum.com/gallery/albums/userpics/29851/20140713_163007_Android.jpg)
(https://forestryforum.com/gallery/albums/userpics/29851/20140713_163049_Android.jpg)
Cheers
Justin
What did he put in the joints on the floor?
Each one nicer then the next. With all the talented people in this country,you would think we would be better off!
Quote from: richhiway on August 14, 2014, 09:25:24 PM
Each one nicer then the next. With all the talented people in this country,you would think we would be better off!
I dont think that table is in this country...
That is a unique flooring job. smiley_thumbsup
So, yesterday I went to the fair to see a display that I made some pieces of wood for my customer.
She is a little wild lady that I have written about here before. But anyway.
She called me up a while ago and asked me if I could cut an 8x8 timber out of a log and sell her all the outside slabs as 4 solid pieces. I told her sure.
She took these four pieces and put them around an 8x8 post in here display area to make it look like a tree standing there.
I thought that they did a good job with it:
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120825.jpg)
She had a corner spot right near one of the gable end doors.
On the tree was this sign:
(https://forestryforum.com/gallery/albums/userpics/10095/Sign_on_tree.JPG)
Here are some pictures of the benches she made out of some curved log slabs I cut for her.
Also, look around the sides of the booth and you'll see some "barn board" square planter bins she made out of wood I milled for her.
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120725.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120736.jpg)
See the guy looking under the bench to figure out how she attached the legs.
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120754.jpg)
She won a ribbon for her display.
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120931.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120949.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_120959.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141013_121038.jpg)
I thought they had a very nice display of plants and wood.
Jim Rogers
I also think so Jim. Congrats on the "raw materials". :)
Really a nice display. Thanks for the pics, excellent ! :) :) :) :) :) :) :) :)
Nice setup.
That is a real handsome floor. Wood tile has gotten popular around here among folks that can afford it. One of my clients had their kitchen done in in wood tile made from Wenge. The "grout" lines were very narrow and used some kind of flexible caulk to act as an expansion joint. Been in for about 4 years now and looks like new. depends on the type of wood used and how its dried and finished I suppose.
There's a small town in upstate NY that still has wood pavers on a dead end side street that by all accounts was installed in the 1870's. A few on the edges have been replaced over the years, but aside from the occasional weeds trying to grow in the cracks, it's still holding up well.
Good sawing job Jim. And she did a good job putting it all together too.
on that end grain floor topic... that's exactly what I have been wanting to do.
I like it a bunch.i got the idea from a butcher block that I seen once. also they used to floor old warehouses like that only about 3 inches thick... the fork trucks would not tear them up if they were end grain as opposed to boards.
Again......Is there information on what your customer tried for adhesive, caulk, and finish ? Thanks Rob
This morning I visited with this lady landscaper and saw a few more of her things she makes and sells.
We discussed her display at the fair. And she told me that the man in charge of the building where these landscaping displays are shown wants to do all the posts in the building with tree trunks. I told her we could for next year.
Here are some more of the things she does and some of them are from wood she gets from me.
(https://forestryforum.com/gallery/albums/userpics/10095/20141016_094706.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141016_094711.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141016_094720.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20141016_094755.jpg)
She is interested in getting more curved pieces of wood from me.
Jim Rogers
(https://forestryforum.com/gallery/albums/userpics/35190/hollow_alder_post.JPG) This is a hollow log we engineered for a customer installation last year . She fit it over an ugly steel post.. Rob
thanks for posting all the pictures guys they all look great. I like the "tile" floor idea alot. keep them coming.
kev
The Montana State Prison used an end grain floor out of 4x4's in the 1800's for their horse barn.... I just saw some of that floor about a year ago and it was awesome looking!! (no, I wasn't "in"....just taking a tour! :snowball: ) They set it all in sand and tamped it down. It got some pretty rough use for a lot of years. We also saw the same floor in the "Copper King Mansion" in Butte, MT, but built out of 2" squares, 6" long. It was awesome!!! We've been talking about trying that for our barn floor ever since seeing it.
John
Quote from: hardtailjohn on October 16, 2014, 08:09:02 PM
The Montana State Prison used an end grain floor out of 4x4's in the 1800's for their horse barn.... I just saw some of that floor about a year ago and it was awesome looking!! (no, I wasn't "in"....just taking a tour! :snowball: ) They set it all in sand and tamped it down. It got some pretty rough use for a lot of years. We also saw the same floor in the "Copper King Mansion" in Butte, MT, but built out of 2" squares, 6" long. It was awesome!!! We've been talking about trying that for our barn floor ever since seeing it.
John
Quite a few years ago I worked in an old machine shop that had a floor like that. It was laid over a concrete slab. You couldn't ask for a better floor to work on! Easy on the feet, and nearly 100 years old.
Quote from: JustinW_NZ on August 14, 2014, 07:12:42 PM
Here's a couple of pics of an outdoor table that a customer made from Eucalyptus timber we were milling, these were a couple of slabs I through aside, they thought they had a better use and I have to agree!!
(https://forestryforum.com/gallery/albums/userpics/29851/20140713_163007_Android.jpg)
(https://forestryforum.com/gallery/albums/userpics/29851/20140713_163049_Android.jpg)
Cheers
Justin
I really like the vortical matching. Very cool idea. ;D 8) 8) 8) 8) 8) 8) 8) :snowball:
Quote from: tule peak timber on October 16, 2014, 01:16:59 PM
Again......Is there information on what your customer tried for adhesive, caulk, and finish ? Thanks Rob
I asked and this is what he said.
"I used Stauf glue, which is poly based and designed for wood floors. I stained it with regular stain, and finished it with a floor top coat.
The thing that made it difficult was the tiles wanted to bow up. So I'm not sure if that's because of the wood wasn't dry enough or the thickness I cut them. I used sheetrock mud as a filler, which probably would have been fine except I left too big of a grout joint in certain places. So the mud started to come out. Had I butted all the tiles together that probably wouldn't have been an issue. I may go back and try regular tile grout to see what that does. "
Sorry for the delay
RP
Thanks for your info Rp ! ;D Rob
In this case I am the supplier of some red oak to a regular customer of mine who makes tables, chairs and cabinets as a hobby. My wife, the end customer in this case, requested cabinets to hold our kids clothes. Basically we have one section for each child.
(https://forestryforum.com/gallery/albums/userpics/27084/IMG_2407.JPG)
The wood was mostly my shorts and left-overs from other projects. But some of it was from my quarter-sawn supply. Here is a close-up of one of the doors. Some nice ray-flecking on a number of pieces.
(https://forestryforum.com/gallery/albums/userpics/27084/IMG_2405.JPG)
The cabinets are just dog gone purty! Very nice work and the quarter sawing pops right out.
On your guy's cabinets ...Yahoo , and then some . Fine craftsmanship. :) Rob
Quote from: RPowers on October 20, 2014, 12:52:56 PM
Quote from: tule peak timber on October 16, 2014, 01:16:59 PM
Again......Is there information on what your customer tried for adhesive, caulk, and finish ? Thanks Rob
I asked and this is what he said.
"I used Stauf glue, which is poly based and designed for wood floors. I stained it with regular stain, and finished it with a floor top coat.
The thing that made it difficult was the tiles wanted to bow up. So I'm not sure if that's because of the wood wasn't dry enough or the thickness I cut them. I used sheetrock mud as a filler, which probably would have been fine except I left too big of a grout joint in certain places. So the mud started to come out. Had I butted all the tiles together that probably wouldn't have been an issue. I may go back and try regular tile grout to see what that does. "
Sorry for the delay
RP
Would epoxy, as used to pour over concrete garage floors, stand up to the expansion and contraction of those wood tiles? If so, that would eliminate the problem of keeping those joints clean in an indoor setting.
This thread is awesome. There are some creative people out there being enabled by custom sawyers trying to please their customers. I love the "perception change" lady.
My 2 -cents...Epoxy even in the more flexible formulas would not be the right stuff due to rigidity and cost. Epoxy soaking the wood "tiles"works VERY well though. I used to pour the seams on the decks of my boats back in the 70's with a post catalyzed poly sulfide /butyl rubber that worked well between the wood planks. Don't see it around anymore, probably the victim of VOC laws in California. Dow makes an excellent caulking called "5200" series that I am looking into. The caulk needs to be legal, pliable, and cost effective for a small operation like mine. Performance needs to be bullet proof if you want to sell the system to customers. Rob
It never ceases to amaze me what people do with the slabs I sell. This first one was an invasive cork wood tree cut out of someones yard in town. I got it from a local tree guy.
(https://forestryforum.com/gallery/albums/userpics/26719/cnc_corkwood.jpg)
(https://forestryforum.com/gallery/albums/userpics/26719/cnc_elm_table.jpg)
Elm table.
(https://forestryforum.com/gallery/albums/userpics/26719/cnc_maple_table.jpg)
Maple table.
Do I count as a customer if all the lumber was given to me by other sawyers? :)
I finally got around to turning the rolling pin I was going to surprise my wife with last summer! It's walnut, cherry, maple, oak, and locust.
(https://forestryforum.com/gallery/albums/userpics/32038/2015-01-17_16_32_20.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/2015-01-21_18_59_13.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/2015-01-21_21_31_11.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/2015-01-24_13_06_53.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/2015-01-24_17_02_05.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/FB_IMG_1422464739764.jpg)
GREAT work, but dang if she gets after you with it better be quick!!!!!!!!!! :D
I like that rolling pin!!!! My wife would REALLY like it.
Awesome thread!
MSSawmill, that rolling pin is awesome!
Yawl would laugh if you saw some of my rough cut projects...they're just that, rough! but usually pretty tough.
Best rolling pin ever! :D
Hey, I recognize some of that lumber!! That is crazy pretty Charles. smiley_thumbsup
Started a portable job today for a customer I sold some locust lumber to a couple years back. Well come high noon, he HAD to show me what he built with the lumber I had sold him. After a 15 minute golf cart ride to the top of this mountain, we arrived at our destination.
(https://forestryforum.com/gallery/albums/userpics/25727/IMG_20150323_123413191_HDR.jpg)
The guy(Bob) is a total trip, and to be a small town OBGYN for 40 years, I'd say you'd have to be in order to keep patients! After our 45 minute golf cart journey, he insisted on taking me to Wendy's for lunch, so to Wendy's we went. After our bellies were full, we headed back to the car, when I read his license plate....."10npushn"; so of course I asked him what it meant. He replied "whenever I'd have a patient in labor at the hospital and they dialated to 10cm, the nurse would call me at home and say she's " 10npushn". He'd know it was time to hop in the car and head to the hospital. Maybe you had to be there, but it was a pretty good belly laugh. He also said he gave away a free pap smear every year at the church fundraiser auction....no one ever bid though he said, most likely too embarrassed!
Sounds like a really cool guy who enjoys life.
:D funny guy!
hunz I bet there is a really nice view from that bench. I have several benches at different spots on my land & I plan on putting roofs on them much like he did. I really like the bench, him & the dog, and the story, thanks. Bob
What a guy, and a very nice relaxin' place too.
What a nice place to be with man's best friend.......
Back in post #54 of this thread, I showed some benches a lady landscaper's crew made out of some curved pine slabs I sold her.
Last October @UpInATree (https://forestryforum.com/board/index.php?action=profile;u=11621) brought his long bar Alaskan chainsaw sawmill over and we cut some wide pine slabs to be used as table tops or bar tops.
Here is a shot of one of them right after we finished sawing it:
(https://forestryforum.com/gallery/albums/userpics/10095/Wide_pine_slab10-31-14.JPG)
Today, I got to visit with the customer and saw what her worker had made from or out of the table tops she bought from me.
Here is a couple of finished tables.
(https://forestryforum.com/gallery/albums/userpics/10095/Wide_top_tables-1.JPG)
The reddish one was suppose to have a "walnut" colored stain. Everyone thinks it's "too" red. It is tall and will be used like a "buffet table".
The other one has a clear oil finish and will have some matching benches not made yet. I was very happy with the results of these table, except for the "reddish" stain. Although it kind of does go with the red cedar log legs.
(https://forestryforum.com/gallery/albums/userpics/10095/Wide_top_tables-2.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/Wide_top_table-3.JPG)
I know where these are going, to her customer; maybe some day I'll see them in place and get some photos of them there at the iFarm.
Jim Rogers
You knows you gots my attention Jim. Looks good! :)
Those are unique and well done.
So this older guy from the next town over came in yesterday, and he's the one who when I ask what's he looking for, he'll say, "I'll know it when I see it......"
I don't really mine him coming in as sometimes he buys something and when he does it's very unexpected.
Well, he took a hard look at the pile of 2 1/4"x 24" x 10' spalted maple table top slabs and found one he liked. So he bought it. And another small oak round edge slab some 5' long.
While he was here, he pulled out his photo booklet and showed me a picture of a table he made from a chunk of walnut left over from me sawing out some bowl blanks for the bowl turner who bowl I posted up at the beginning of this thread.
I considered this piece junk as it was all split up and cracked very bad.
Here is a picture of a picture of the table:
(https://forestryforum.com/gallery/albums/userpics/10095/Walnut_table-Pat.JPG)
I hope you can see it alright.
Jim Rogers
In the "what are you sawing" thread, I posted this picture of some timbers I cut up for a customer who was going to make it into a pergola for his mother's house.
(https://forestryforum.com/gallery/albums/userpics/10095/Pergola_timbers-1.JPG)
Yesterday, he sent me some pictures of the finished project.
I thought I'd share those with you all, as I know you all like pictures.
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1067.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1066.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1065.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1064.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1068.JPG)
Jim Rogers
Wow Jim, that thing is huge. It's always nice to see pictures of your lumber/timbers being used. 8)
This thread shot most of an hour for me. Not fair!
On the end-grain tile floor: really cool that you can see the tiles were laid out in the order they were cut from the timbers. Reads like a story.
Jim,
He did a fine job on that pergola.
Nice, that is one strong built sucker for sure. bg
I thought using 8x8's for braces was a little "over the top" but to each their own.
Jim Rogers
Quote from: Jim_Rogers on August 15, 2015, 09:09:28 AM
I thought using 8x8's for braces was a little "over the top" but to each their own.
Jim Rogers
Agreed, it looks great and well built but too 'heavy' IMO.
Not to come off like a butthead, but what's the point of a pergola? Why not put some tin on top so when it rains you can hang out without getting wet!
You are not a butthead, but it is for air drying wood. Get's it up out of the way, whereas a stack would take up usable space. ;)
Also a good way to introduce decay... ;D
Quote from: 4x4American on September 15, 2015, 04:27:35 PM
Not to come off like a butthead, but what's the point of a pergola? Why not put some tin on top so when it rains you can hang out without getting wet!
Offers some shade in an outdoor open air deck environment. Often built where a pitched roof would not be practical. Some folks want the air flow, sun and deck ambience without the roof.
It looks great, don't get me wrong...but I'm a practical guy, this doesn't make sense to me I say it looks like someone was building a roof then went to the bar for lunch and didn't come back :D
He did a great job. I'm sure the ladies of the establishment love it too.
A while ago, I posted some pictures of some large pine slabs that my customer made into some tables.
Saturday, I got to visit the farm where the tables were being used.
Here is a shot of the table.
(https://forestryforum.com/gallery/albums/userpics/10095/20150912_152755.jpg)
Her worker who made these up for her took one slab and cut it in half to make two bench seats for this table:
(https://forestryforum.com/gallery/albums/userpics/10095/20150912_152834.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/20150912_152823.jpg)
I asked how did he attach the top to the base of the table. She said on one table he hollowed out the round spots where the post of the legs touch the table to make an indent for the leg post to sit into. Then I believe he used some screws to secure the top to the base. I believe he did that up from the bottom so that there are no holes through the table top. He didn't do that until it was on site, so that they could move them in two pieces, the top and the base.
(https://forestryforum.com/gallery/albums/userpics/10095/20150912_152807.jpg)
Here is another picture of the base of another table:
(https://forestryforum.com/gallery/albums/userpics/10095/20150912_151722.jpg)
It's great to see the final product in place being used.
Jim Rogers
Quote from: JohnM on August 15, 2015, 10:09:54 AM
Quote from: Jim_Rogers on August 15, 2015, 09:09:28 AM
I thought using 8x8's for braces was a little "over the top" but to each their own.
Jim Rogers
Agreed, it looks great and well built but too 'heavy' IMO.
All that matters is that mama's happy! :)
I like the table and benches Jim. There is great satisfaction in seeing a final product/use. I very seldom get to see that.
Wow! You fellas sure have some talented customers! It has to be pretty neat to see the product you produce transform into so many neat things. I really can't wait until I have enough pennies stacked up to buy a mill of my own! My dad and soon to be father in law are both very talented carpenters and woodworkers. They both have about 2 years till retirement. I am looking forward to keeping them stocked up with lumber for their projects!
Had a customer use Ash that I sawed to rebuild the water wagon for his steam traction engine. I also supply the firewood to run the engine 8)
(https://forestryforum.com/gallery/albums/userpics/16789/IMG_20140614_105405.jpg)
nice wagon, that had to be a good show to visit,
Over the weekend I got some photos of several projects some customers of mine did.
They were tool customers and had brought timber framing tools from us to use to cut timber frames.
The first one is this little frame cut for a wedding:
(https://forestryforum.com/gallery/albums/userpics/10095/20150829_140410-s.jpg)
And:
(https://forestryforum.com/gallery/albums/userpics/10095/20150829_140354-s.jpg)
And a nice corner joint:
(https://forestryforum.com/gallery/albums/userpics/10095/20150809_171838-s.jpg)
Jim Rogers
The second set of photos were sent to me didn't download correctly from my mail server. However the customer did provide me with a link.
I don't think posting links to off site pictures are allowed. So I won't post it.
I can capture one and post it here:
(https://forestryforum.com/gallery/albums/userpics/10095/Evan_Wilson_frame.JPG)
This fellow is in TX.
He is a member or staff of "Mobil Loaves and Fishes"
An outreach organization for Austin, TX.
Here is a little about their efforts:
Mobile Loaves & Fishes, Inc. began when five parishioners of St. John Neumann Catholic Church in Austin, Texas boldly answered God's call to "Love your neighbor as yourself." Alan Graham and his friends began delivering meals out of the back of a minivan to men and women they found living on the streets of their city. Alan readily admits that their original paradigm of serving the homeless had some flaws, but with the help of a formerly homeless man, they perfected the model that we successfully use today.
To learn more about them here is a link to their site:
http://mlf.org/
But, anyway they needed a building for their organization. And they figured it would be nice to build one themselves. And in doing so teach homeless (and others) a skill or craft that they could use. So they chose a timber frame.
I don't exactly remember all the details of what they are going to use the building for. It could be to host classes or for other reasons.
But they wanted me to see what the tools they purchased from us did to help them achieve their goals.
Jim Rogers
No Pics yet but met what turns out to be a very nice young couple.
Got the order for 100 bf consisting of 51-3/4'x3'x8' and 31-3/4"x6"x 8'. They didn't give a preference for species so I cut it out of Grand Fir.
Their area code was out of state and they said they would be by Monday evening to pick it up.
First it was at 5, then it was just late then it got dark. Started to worry about them so sent a text and they had broke down and couldn't find the other place they were picking up stuff from. I had given up and wished them luck.
Got a text a 10:30 saying they would be there in 30 mins. Reluctantly I said come and get it.
When they showed up in the old beat up Doge it was packed full with a 1 ton bag of feed grain and 30 spit cedar fence posts.
in the cab was a young man in his early twenties and his fiancé sitting up tight next to him. Brought me back 25 years in a hurry when we were eager to make it own our own.
They had driven over 300 miles picking up their Craig's list bargains and still had 3 hour drive home and work the next day.
That young man impressed me as he arranged then stacked everything in the back and strapped it all down tight.
I gave him an extra inexpensive strap I had just to make me feel a little better for their trip home.
I wished them the best but I think they will be just fine.
Love and being together will get them far. ;D
No need for a camera because you drew a nice picture garre1tt. smiley_thumbsup
This is a table built by uncle for one of his daughters. All of it is red oak from an ancient oak tree that grew behind the house he was raised in. The tree had several problems, so he had it taken down and had as much of it as he could cut up into logs. Dad and I cut the logs into 1" boards with 1 "live edge", and my uncle has had them air drying for about a year now. I didn't get to see the table before he took it to my cousin, but he said the grain and coloration were just beautiful! Hopefully it's something that she will enjoy for years to come...
(https://forestryforum.com/gallery/albums/userpics/32038/IMG_1641.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/IMG_2452.jpg)
(https://forestryforum.com/gallery/albums/userpics/32038/IMG_9022.jpg)
Thursday, I traveled to VT from the western side of my state. At a rest area building on RT 91 northbound, I saw this neat 6x6 block bench:
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_28_18.jpg)
Also, I saw this little side table made out of a small piece of round edge slab:
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_28_58.jpg)
On the other side of the room was this table to stand at and charge your cellphone.
It has a black power strip on both upright pieces. I can see that this table may have been made from one long piece cut into three pieces.
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_29_08.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_29_18.jpg)
Jim Rogers
I see that the state is really into the woodsie decor. Good for them. Many travelers will see those and "want one". 8)
While delivering some walnut lumber today to a customer he showed me what he was working on.
He is making wooden finger rings, and some wooden bracelets called bengals or bandgals ?
(https://forestryforum.com/gallery/albums/userpics/10095/2016-02-03_12_22_50.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/2016-02-03_12_23_03.jpg)
That one didn't fit me.
(https://forestryforum.com/gallery/albums/userpics/10095/2016-02-03_12_23_24.jpg)
And the medium size ones are napkin rings.
Was interesting seeing how he glued up different color woods to make these.
Jim Rogers
Quote from: Magicman on September 23, 2015, 10:15:41 PM
No need for a camera because you drew a nice picture garre1tt. smiley_thumbsup
thats what i was thinking a great story that was well told :)
This morning I got an email with some pictures of some "log/stumps" that I sold a fellow who wanted to make "end tables" out of them.
I think they came out nice:
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1538.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1537.JPG)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1539.JPG)
Jim Rogers
Yes they did. Sending the pictures also says that your customer was well pleased. I love happy customer$. ;D
Quote from: Jim_Rogers on January 31, 2016, 04:13:13 PM
Thursday, I traveled to VT from the western side of my state. At a rest area building on RT 91 northbound, I saw this neat 6x6 block bench:
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_28_18.jpg)
Also, I saw this little side table made out of a small piece of round edge slab:
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_28_58.jpg)
On the other side of the room was this table to stand at and charge your cellphone.
It has a black power strip on both upright pieces. I can see that this table may have been made from one long piece cut into three pieces.
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_29_08.jpg)
(https://forestryforum.com/gallery/albums/userpics/10095/2016-01-28_09_29_18.jpg)
Jim Rogers
Hey-I've stopped there many times and taken pics of the woodworking, very inspiring.
Quote from: 4x4American on September 15, 2015, 04:27:35 PM
Not to come off like a butthead, but what's the point of a pergola? Why not put some tin on top so when it rains you can hang out without getting wet!
It's to put your sawmill under when you no longer have one. ::)
Ahh...
I made me a study on them,
and come to conclude that they're just for fancy effects. I kind of like them but at first couldn't understand why someone would go through the hassle of making a roof frame without a roof ???
I am enlightened now
That is good. Many people seek Enlightenment but never find it :).
Strangely somehow it helps to be looking in the sawdust for it. ::)
Another pair of end table from logs. One pine one oak.
Jim Rogers
(https://forestryforum.com/gallery/albums/userpics/10095/image1.jpg)
(https://forestryforum.com/gallery/albums/userpics/36163/LloydMilling2-1.jpg)
(https://forestryforum.com/gallery/albums/userpics/36163/Lateral3.jpg)
(https://forestryforum.com/gallery/albums/userpics/36163/1106091105-1.jpg)
(https://forestryforum.com/gallery/albums/userpics/36163/IMGP9294.jpg)
Actually, I was the customer here. The red oak timber came from two trees that tipped over on our woodlot, 1250 bd-ft rough. We wound up doing and did something like 800 sq-ft of random width (3", 4" and 6") with plenty of high quality rough boards left over.
Oh yes. smiley_thumbsup
This young lady will take my odball scrap wood
(https://forestryforum.com/gallery/albums/userpics/33477/DSCN0758_28129.JPG)
And make sign's
(https://forestryforum.com/gallery/albums/userpics/33477/DSCN0756_28129.JPG)
(https://forestryforum.com/gallery/albums/userpics/33477/DSCN0757_28129.JPG)
A bought every two weeks Gail is here digging in my scrap pile witch is a good thing yesterday where i can get a highly value'd big wall nut log for the takeing just have to go cut it down
A while ago, on the "what's you sawing thread" I posted some pictures of the fellow who brought some timbers in from the island of Nantucket off the southern side of MA.
(https://forestryforum.com/gallery/albums/userpics/10095/2016-02-26_11_31_46.jpg?easyrotate_cache=1456801604)
(https://forestryforum.com/gallery/albums/userpics/10095/2016-02-26_12_13_44.jpg?easyrotate_cache=1456801644)
(https://forestryforum.com/gallery/albums/userpics/10095/2016-02-26_12_50_56.jpg?easyrotate_cache=1456801704)
Today, he send me a picture of the completed table he made out of the timbers:
(https://forestryforum.com/gallery/albums/userpics/10095/done-1.jpg?easyrotate_cache=1465350619)
I think it came out nice.
Jim Rogers
Nice looking table. I like it when I get paid for slab boards. :laugh:
Thanks for sharing the pictures Jim. He did some good work.
Terry
Wow! One thing after another, I've only gotten to page three, I'll come back to look over the rest.
Thanks
http://www.nevadaservicedogs.org/
A while ago, I posted some pictures of my mill cutting some 2" thick short pieces of exotic woods. Well the customer just emailed me some pictures of the first piece he made out of the stuff I sliced for him.
This one is Zebra wood:
(https://forestryforum.com/gallery/albums/userpics/10095/Larry-1-.jpg?easyrotate_cache=1465937616)
(https://forestryforum.com/gallery/albums/userpics/10095/Larry-2.JPG?easyrotate_cache=1465937616)
(https://forestryforum.com/gallery/albums/userpics/10095/Larry-3.JPG?easyrotate_cache=1465937617)
This is a type of wooden bowl made by cutting the same piece on an angle with a scroll saw. Then you put the small side of one on top of the big side of the next one and they stack up.
Jim Rogers
And it looks good. :)
$300
$300 X2
Quote from: Jim_Rogers on June 14, 2016, 04:57:23 PM
A while ago, I posted some pictures of my mill cutting some 2" thick short pieces of exotic woods. Well the customer just emailed me some pictures of the first piece he made out of the stuff I sliced for him.
This one is Zebra wood:
(https://forestryforum.com/gallery/albums/userpics/10095/Larry-1-.jpg?easyrotate_cache=1465937616)
(https://forestryforum.com/gallery/albums/userpics/10095/Larry-2.JPG?easyrotate_cache=1465937616)
(https://forestryforum.com/gallery/albums/userpics/10095/Larry-3.JPG?easyrotate_cache=1465937617)
This is a type of wooden bowl made by cutting the same piece on an angle with a scroll saw. Then you put the small side of one on top of the big side of the next one and they stack up.
Jim Rogers
It looks similar to those telescoping, jam-fit bowls only better. The procedure for cutting is as you describe, with the blade of the scroll saw set at an angle. A series of concentric cuts are made and then you lift on the outer ring and it all jams together and resembles a wooden ship with heavy planking. The amount of overlap for each section depends on the angle chosen for the cut.
The ones I've seen always had at least vestiges of the steps remaining, possibly because it's a lot of work to make 'em smooth and wastes quite a bit of wood.
The bowl you show looks slick! Stacking the sections after cutting would elminate the wasted wood of telescoping as well as reduce smoothing time.
I had a great time reading through 7 pages of your projects. I've been making things out of wood for 35 years, here is my latest project: (if I can get the files to upload)
Project started when I found a guy 10 miles north of my cottage that had Emerald Ash Borer come through and wipe out all his trees. He had the idea to slab it all and let it air dry. I came along a year later when he wanted the stuff off his property. I showed up in a Chevy Volt ;D Took a few trips but had it at the cottage. There were additional trips with truck and trailer for a total of 3500 bdft.
(https://forestryforum.com/gallery/albums/userpics/43283/ASH_in_a_Volt.jpg)
I used this Ash for Kitchen cabinets, Laundry room cabinets, wood floors, dining room table and benchs, mantle, and the list goes on and on.... :)
(https://forestryforum.com/gallery/albums/userpics/43283/DSCN0052.JPG)
(https://forestryforum.com/gallery/albums/userpics/43283/2014_06150130.JPG)
(https://forestryforum.com/gallery/albums/userpics/43283/2014_06150033.JPG)
(https://forestryforum.com/gallery/albums/userpics/43283/2014_06150154.JPG)
(https://forestryforum.com/gallery/albums/userpics/43283/2014_06150075.JPG)
Now that was a deal... Looks great...
Yes,it does look great!!
Very impressive.
Beautifully done. smiley_thumbsup
That is some fine looking work! You sure went beyond just rescuing some wood.
Looks like an up town job for sure :) :)
Thanks guys! I guess i missed the point about telling you that next project is to get the welder out and start building my own mill.
Now you are really talking. :P 8)
A customer stopped by this morning to show me what he did with the slabs from a tree where we hit nails a couple of weeks ago. He was going to throw them into the burn pile with the slabs when I insisted that he keep them.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_1192.JPG?easyrotate_cache=1473091593)
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_1193.JPG?easyrotate_cache=1473091606)
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_1194.JPG?easyrotate_cache=1473091619)
The nail is in the center of the seats. He used an axe to remove the rotted sapwood which gave the project a "hewed" look. His wife is happy. :)
Wow some really great stuff. That bowl must have taken a really long time to make.
Lakehouse that cottage looks great.
MM- that is some inspiration for me, I think I might be able to build something like that and maybe sell it for $300 lol
Better bring some help to load it because that bench is heavy. :o
Recently a family came out to look for a mantle. I had a couple sawn but they wanted something I did not have. They wanted it rustic and gave me rough dimensions. I sawed it soon after they left and the husband/dad came back a few days later. I cut a little more off to meet his criteria and then had to attempt to cut it squarely to length with a chainsaw. Yesterday, his wife sent me a thank you text and pictures of the mantle in place.
(https://forestryforum.com/gallery/albums/userpics/22883/image~135.jpg?easyrotate_cache=1474250839)
(https://forestryforum.com/gallery/albums/userpics/22883/image~137.jpg?easyrotate_cache=1474250846)
The included bark was centered and became a focal point for this mantle.
Perfect mantle for that wall.
Quartersawn sycamore table from some of the sycamore sawn by Customsawyer and me at the last Sycamore Project.
(https://forestryforum.com/gallery/albums/userpics/14370/27D349D7F5BD4FC09D5CA18ABC90B0AF-1.jpg?easyrotate_cache=1474286486)
(https://forestryforum.com/gallery/albums/userpics/14370/608553CA7A06482E93A89711BCCBB043-1.jpg?easyrotate_cache=1474286531)
Quote from: WDH on September 19, 2016, 08:02:35 AM
Quartersawn sycamore table from some of the sycamore sawn by Customsawyer and me at the last Sycamore Project.
I believe that the one board I handled at the Project is in that table. I could be wrong. :D Very nice table and pretty wood. Fine craftsmanship.
Kyle, that mantle looks just about perfect on that wall. Danny, you did that table proud!
$300 plus tax, tags, license. ;D
Thanks Nomad and Danny.
Danny, the table is really nice. I bet the quarter sawn boards are really spectacular when the light hits them just right.
Quote from: WDH on September 19, 2016, 08:02:35 AM
Quartersawn sycamore table from some of the sycamore sawn by Customsawyer and me at the last Sycamore Project.
(https://forestryforum.com/gallery/albums/userpics/14370/27D349D7F5BD4FC09D5CA18ABC90B0AF-1.jpg?easyrotate_cache=1474286486)
(https://forestryforum.com/gallery/albums/userpics/14370/608553CA7A06482E93A89711BCCBB043-1.jpg?easyrotate_cache=1474286531)
That's a heck of a tongue twister. How much quarter sawn sycamore could customsawyer saw, if customsawyer could saw quarter sawn sycamore?
Say that fast ten times :D.
The project is the goss lake stair renovation I couldn't separate it from his website not trying to promote his business just wanted to show the Madrone stairs. hope this is ok. http://www.oblqstudio.com/goss-lake-gallery/4hagiqlukv2o7zwwq599w76f4qi4s3 check out this link and these are some pics of the Madrone we had to quarter up to fit the B-20.
Wished I had the Hudson 60 back then. So several years
back I custom milled what I call rare Madrone because of the size of tree, it was 5-6' diameter
(https://forestryforum.com/gallery/albums/userpics/22539/rps20120930_150657_476.jpg?easyrotate_cache=1349043552)
(https://forestryforum.com/gallery/albums/userpics/22539/rps20120930_150419.jpg?easyrotate_cache=1349043696)
(https://forestryforum.com/gallery/albums/userpics/22539/rps20150311_200946_727.jpg?easyrotate_cache=1426129839)
I sure like the iron work and how they made a suspended stairway.
A customer came by and picked up some wood today and brought a cutting board that he'd made out of some of my walnut and maple.
(https://forestryforum.com/gallery/albums/userpics/33082/IMG_20161009_135958315_HDR.jpg?easyrotate_cache=1476055312)
He's got more patience than I do :D
That is a nice big one.
Milled for a client in July, mostly poplar, some oak, cedar and walnut. He mentioned that he would be using the wood to build a rustic cabin in the woods with his two youngest sons. He invited me back to an open house today to see the finished cabin. Very cool!
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_145558.jpg?easyrotate_cache=1477783890)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_145420.jpg?easyrotate_cache=1477783891)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_145721.jpg?easyrotate_cache=1477783961)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_150305.jpg?easyrotate_cache=1477783967)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_150324.jpg?easyrotate_cache=1477783966)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_150052.jpg?easyrotate_cache=1477783965)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_145821.jpg?easyrotate_cache=1477783965)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_145759.jpg?easyrotate_cache=1477783963)
(https://forestryforum.com/gallery/albums/userpics/29506/20161029_152238.jpg?easyrotate_cache=1477783961)
Looks good. The couch,outside,the wife would love. And than some.
That is a lot accomplished since July, but that cozy cabin will be a cold cabin this winter. :o
Quote from: Magicman on October 29, 2016, 08:49:44 PM
That is a lot accomplished since July, but that cozy cabin will be a cold cabin this winter. :o
It's only a couple hundred yards from home. Out of sight in the woods. More of a place to get away for a few hours, or to entertain company. There's a brick barbeque, a firepit and some benches out front.
I did ask him twice what the rent would be...... I'm overdue for a change of scenery.
Wood turners, they drive me nuts and I love them for what they do to "my" timber
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_1692.JPG?easyrotate_cache=1477791214)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_1691.JPG?easyrotate_cache=1477791216)
Queensland Maple bowl by Jim McConnachie
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_1693.JPG?easyrotate_cache=1477791464)
Salt and Pepper Grinders in New Guinea Red Wattle by Richard Casey. Richard feels they're out of proportion, his preferred mechanism requires 4x4's for stock and I only had that in 3x3 at that time.
Makes a change from framing, flooring, and kitchens for sure
I sure would like to know how the bowl was held in the lathe to finish the bottom.
I built my mill and always to Timberframe n the hobby scale. Built an arbor and a greenhouse this year.
(https://forestryforum.com/gallery/albums/userpics/42916/image~21.jpeg?easyrotate_cache=1465708209)
(https://forestryforum.com/gallery/albums/userpics/42916/image~38.jpeg?easyrotate_cache=1473719783)
WOW...those are some super nice photos of some real fine examples. It is an understatement of how creative folks are and especially when you have a hand in it. I will try to put these in some kind of order seein as I am new to this pic/post thing.
(https://forestryforum.com/gallery/albums/userpics/42880/002_2.JPG?easyrotate_cache=1477837179)
(https://forestryforum.com/gallery/albums/userpics/42880/012_12.JPG?easyrotate_cache=1477837138)
(https://forestryforum.com/gallery/albums/userpics/42880/014_14.JPG?easyrotate_cache=1477576246)
(https://forestryforum.com/gallery/albums/userpics/42880/barn_move_43_20121022_1772356465~0.jpg?easyrotate_cache=1477836771)
(https://forestryforum.com/gallery/albums/userpics/42880/Historic2520Barn2520web.jpg?easyrotate_cache=1477875034)
Very nice to see all the pictures.
Quote from: Kbeitz on October 30, 2016, 09:21:17 AM
I sure would like to know how the bowl was held in the lathe to finish the bottom.
A simple way to do the bottom is with a jam chuck. With a piece of wood mounted in a chuck or screwed to a face plate, it is turned in the shape of a dome that resembles the interior of the bowl. Put the bowl against this dome with fabric in between and tighten the tail stock to hold it. Turn the bottom and hand sand the little nub to finish it.
Quote from: Kbeitz on October 30, 2016, 09:21:17 AM
I sure would like to know how the bowl was held in the lathe to finish the bottom.
There's a few ways to get the bottom tuned up:
Finish the top and use a vacuum chuck to hold it so you can finish the base.
Finish the top and use a live center on the back to tune it till it gets really small and finish the teat that's left over, by hand.
Finish the top and use a jam chuck to grab the top to finish the base.
Finish top and use a wide flange chuck plate with tabs to grab the edge of the top and turn the base.
These are methods I have used or seen, there are surely more ways to skin this cat.
Thanks.... :-X
Got to see the new home that one of my best long term clients had built recently. They were the very first milling client I had when I upgraded to my LT40. I've milled for them 4-5 times. They used red oak, maple and poplar for flooring. An Amish firm nearby in PA dried, surfaced and T&G'd the wood. The client told me that the flooring contractor who installed it said it was the most beautiful flooring he's seen with 30 years in the business. She's tickled pink. I'll pass the credit to having good logs. ;)
(https://forestryforum.com/gallery/albums/userpics/29506/20161031_151523.jpg?easyrotate_cache=1478042802)
(https://forestryforum.com/gallery/albums/userpics/29506/20161031_151614.jpg?easyrotate_cache=1478042803)
(https://forestryforum.com/gallery/albums/userpics/29506/20161031_152016.jpg?easyrotate_cache=1478042805)
(https://forestryforum.com/gallery/albums/userpics/29506/20161031_152134.jpg?easyrotate_cache=1478042806)
(https://forestryforum.com/gallery/albums/userpics/29506/20161031_152243.jpg?easyrotate_cache=1478042847)
(https://forestryforum.com/gallery/albums/userpics/29506/20161031_153435.jpg?easyrotate_cache=1478042848)
Ages back Mary was in the drymill helping me one weekend and she spotted a board she liked and pulled it off. It stood against the wall for a good 6 months, maybe a year because it's Groundhog Day every day here at the sawdust factory, with "Marys board, not for sale" scrawled over it in crayon.
Then she horse traded some timber with a woodworker customer for a commission. I don't think the guy knew what he was in for!
Anyway, today 12 months and one day later, this showed up
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20170218_132350.jpg?easyrotate_cache=1487389737)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20170218_132414.jpg?easyrotate_cache=1487389821)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20170218_133142.jpg?easyrotate_cache=1487389924)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20170218_133034.jpg?easyrotate_cache=1487390038)
(https://forestryforum.com/gallery/albums/userpics/32746/mary_s_box.jpg?easyrotate_cache=1487489936)
Jewellery / keepsake box. Lid in birdseye Huon Pine with mother of pearl and paua shell Celtic knot inlay, trimmed in Queen Ebony. Main body of the box " her board": New Guinea Red Wattle, light fiddleback right over it and no matter where you look at it from it shimmers and changes colour. Insert tray in.Australian Lacewood -the real one not that Brazilian ripoff stuff -with pigskin suede linings. Top end solid brass fixings and locks imported from Europe. Sadly I can't get a picture that's even close to showing how good this thing is... me sawmillers not photographer.
And after a lovely visit the guy and his wife drove off with another carload of good stuff.
She's a happy girl, and I think she's horse traded another commission with him. And I'm happy because she's happy, and because I love it when a craftsman takes my timber and does something special with it. Good for business too... Can't get that stuff at Home Depot.
Now that is fantastic wood and fantastic work, I don't care who you are ;D.
I dont know why Danny but the little artisinal guys we deal with - and a lot of them are retired and/or hobby woodworkers rather then professionals - are the ones I love working with. I get a bigger kick out of seeing a box, guitar, turning work, or some little knickknack then I do out of seeing house... floor... wallpanels... kitchen. The big stuff might pay my bills but its this kinda stuff that makes it worthwhile.
I've watched the back and forth as they kicked design around and chose inlay materials and hardware and... the guys put so much time into this thing its incredible. And its perfectly what Mary wanted - a big box for her jewellery and journals that will become her youngest daughters in time, and become a heirloom piece.
Mary has a rocker and chest here that has done some miles... her great grandfather made them for her great grandmother way back when and they've travelled all over the world from Texas to get to here. This box will be like that.
I cant get a picture of it that shows what it is. It's stunning, and the workmanship is incredible in its detail: I couldn't build something like that. So much time swapped for a few boards that it makes me feel guilty in a way. Yah, okay they're good boards and they'd cost some dollars from a specialty timber seller but same as you guys when you run the mill its "just another board but a pretty one".
I could get over the guilty feeling pretty fast :D That is beautiful. Always neat to see different wood. In sugar pine we'll get the same effect, I think they call it cat's paw.
A lot of us need to step up! WOW them would be really!! Big steps
I just want to post so this thread always pops up everytime it is updated. I am always looking for ideals to steal and so hope poeple keep posting what they are doing.
gww
Here are some projects that some of my customers made from my wood and from wood that Jake (Customsawyer) and I sawed together.
This table was made from naturally stained maple slabs sawn 2 3/8" thick. Because the log had taper, the customer, a fine craftsman, designed a middle piece with a type of large dutchman to even out the taper so that the table was the same width on both ends. Very ingenious.
(https://forestryforum.com/gallery/albums/userpics/14370/IMG_1796~0.JPG?easyrotate_cache=1488545108)
Here is the finished table.
(https://forestryforum.com/gallery/albums/userpics/14370/IMG_1795~0.JPG?easyrotate_cache=1488545084)
Same customer, bookmatched maple with walnut butterflies.
(https://forestryforum.com/gallery/albums/userpics/14370/IMG_1797~0.JPG?easyrotate_cache=1488545157)
Red oak this time. These guys are pros.
(https://forestryforum.com/gallery/albums/userpics/14370/IMG_1798.JPG?easyrotate_cache=1488545181)
Quatersawn white oak hutch with a bit of spalt.
(https://forestryforum.com/gallery/albums/userpics/14370/IMG_1785.JPG?easyrotate_cache=1488545208)
Quote from: gww on February 19, 2017, 08:47:41 AM
I just want to post so this thread always pops up everytime it is updated. I am always looking for ideals to steal and so hope poeple keep posting what they are doing.
gww
There is a "Notify" button at the top and bottom of each thread just for this purpose. ;)
(https://forestryforum.com/gallery/albums/userpics/32746/parso_camphor_table.jpg?easyrotate_cache=1505732640)
(https://forestryforum.com/gallery/albums/userpics/32746/parso_camphor_table_2.jpg?easyrotate_cache=1505732961)
not my cup of tea but my customer tells me his customer is ecstatic.... wood is Camphor Laurel.
Quote from: longtime lurker on September 18, 2017, 07:05:33 AM
(https://forestryforum.com/gallery/albums/userpics/32746/parso_camphor_table.jpg?easyrotate_cache=1505732640)
(https://forestryforum.com/gallery/albums/userpics/32746/parso_camphor_table_2.jpg?easyrotate_cache=1505732961)
not my cup of tea but my customer tells me his customer is ecstatic.... wood is Camphor Laurel.
I would take that anyday... Looks great.
I love it.
The Beauty and Originality are without question but I first thought; Angry, and then Confused. This just proves that wood is the ultimate natural art medium and woodworkers are the artist. smiley_thumbsup
Someone does some mighty fine looking work!!!!! :o
This makes me wanna build a Walnut Rabbit Box or something. Nice tables.
You got Walnut Rabbits that need to be boxed up !! :o
If Danny ever finds out your Goat will be got, but then he has Sycamore Fish. :D
Don't need any walnut goats or walnut rabbits at this time. No need to build a walnut box for them. I will take the extra walnut off your hands. For one walnut board today, I will gladly pay you 2 walnut boards next Tuesday.
https://www.youtube.com/watch?v=30knrJBeyr0
WDH,
re.post 182...That is some mighty fine work those fellas turn out.I just can't imagine a better way to make a living than working with wood.
Very inspiring .
:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
Sawed for Steve two years ago, about 6500 bdft of hemlock, white pine and a few hardwoods. He had the Amish come build this barn for him with the lumber. I took this picture a few weeks ago when he had me back to saw another 5k bdft
(https://forestryforum.com/gallery/albums/userpics/11405/20170812_172452.jpg?easyrotate_cache=1505998339)
One of the mantle beams that I sawed. :)
(https://forestryforum.com/gallery/albums/userpics/28346/IMG_1119.jpg?easyrotate_cache=1510195967)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20150324_080545_899.jpg?easyrotate_cache=1518608999)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20150324_080625_965.jpg?easyrotate_cache=1518609024)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20150324_080604_742.jpg?easyrotate_cache=1518609061)
16 seat table in Queensland Maple. I woulda put turned legs under it but thats what the customer wanted thats what they get I guess. Just glad I didnt have to help shift that thing!
wow that table is crazy they need an electric turntable in the center of it just to move stuff around. can't reach anything in the very center.
That table could host a heck of a poker game :).
And support a big pot of money.
But you couldn't reach the money :)
It is destined for a boardroom for "a company of equals"
I know two of the guys in that company... they probably want the distance to keep them apart. :D
A while ago, I loaned a customer a book off of my bookshelf and he returned it yesterday.
In his other hand was a present for my wife:
(https://forestryforum.com/gallery/albums/userpics/10095/20180326_181642.jpg?easyrotate_cache=1522173283)
(https://forestryforum.com/gallery/albums/userpics/10095/20180326_181702.jpg?easyrotate_cache=1522173283)
(https://forestryforum.com/gallery/albums/userpics/10095/20180326_181658.jpg?easyrotate_cache=1522173283)
My wife loved it. He said so far he had made some 70 or 80 of these to sell at craft fairs.
Jim Rogers
Jim,
Good looking workmanship. Now you better behave because your customer will be very upset if you make your wife mad and she was to kill you with that roller.
Quote from: WV Sawmiller on March 27, 2018, 02:02:36 PM
Jim,
Good looking workmanship. Now you better behave because your customer will be very upset if you make your wife mad and she was to kill you with that roller.
You got that right.
X marks the spot :D
I would love to see how that was done....
Nice rolling pin!
I think the square blank was cut in two at a angle and glued back together with the darker wood in between the two pieces. (twice)
If you search "keltic knot wood turning" you will see something similar only more cuts.
It's not too difficult K,
first the different boards are glued lengthwise. Next the laminated boards are cut with a chop saw at the angle of your desired "X" and then glue one leg of the "X" into that gap. When that dries, flip it 180 and cut the other leg of the "X" and glue in the same size board into that gap. Clamping can be a little difficult with the "X" and it's easier with a slot so the board stays in line. Without a slot, and the pressure clamping on the end, the board wants to slide away from this angled cut.
When all this gluing is finished, you simply center it on the lathe and turn your desired shape. A rolling pin, a goblet, an icecream scoop handle...... You can also cut this "X" in all four sides and at different angles which gives a pretty neat aesthetic.
Quote from: RPowers on August 14, 2014, 10:22:20 AM
I resawed some old oak timbers for a customer who wanted them squared to 6x8 so he could crosscut them on his miter saw. Said he was going to tile a floor with them. Last night he emailed me a picture of his finished floor. How neat is that?
(https://forestryforum.com/gallery/albums/userpics/33443/IMG_1137.jpg)
Did he happen to tell you how thick they were cut? Reason I ask, have a bunch of ERC that will be sawn up again. And I have an ideal using the Red Cedar. No way will I let my wife see that picture. :o
Quote from: Jemclimber on March 28, 2018, 12:04:45 PM
It's not too difficult K,
first the different boards are glued lengthwise. Next the laminated boards are cut with a chop saw at the angle of your desired "X" and then glue one leg of the "X" into that gap. When that dries, flip it 180 and cut the other leg of the "X" and glue in the same size board into that gap. Clamping can be a little difficult with the "X" and it's easier with a slot so the board stays in line. Without a slot, and the pressure clamping on the end, the board wants to slide away from this angled cut.
When all this gluing is finished, you simply center it on the lathe and turn your desired shape. A rolling pin, a goblet, an icecream scoop handle...... You can also cut this "X" in all four sides and at different angles which gives a pretty neat aesthetic.
Thanks...
Several years ago I was in an antique store and bought a marble rolling pin for my wife, never did figure out what I was thinking.
(https://forestryforum.com/gallery/albums/userpics/32746/titty_wood.jpg?easyrotate_cache=1524196652)
Anything I say here will get me in trouble. :D
Get you in trouble? Maybe if you specify whether it's right side up or upside down. Would make a difference in the perception of the figure portrayed...
LJ
Can you give us some measurements ??
Quote from: LAZERDAN on May 27, 2018, 11:05:12 PM
Can you give us some measurements ??
ohhhhhhhhh 'bout 36DD by the look :D
Watch out, you've got one foot on the path to the wood shed. :D
Do you still have the book matched mate to that one? ;D
A fellow who bought some cedar from us a couple of months ago sent me a few pictures of his finished table. He is a metal worker by trade and evidently likes shiny wood.
(https://forestryforum.com/gallery/albums/userpics/22883/image~515.jpg?easyrotate_cache=1527631180)
(https://forestryforum.com/gallery/albums/userpics/22883/image~513.jpg?easyrotate_cache=1527631179)
I like the white tube base that he built.
That defines shiny.
Unreal !
That's an incredibly beautiful table....in exactly the wrong location. This is not going to have a happy ending, because his wife is NOT happy with this. Trust me, his wife is NOT happy with this.
Never thought of using granite for window sills..
I never thought of using cedar for a mirror :). Beautiful work!
Must be about a dozen coats of something on there. I would really like to know what the finish is: I got a spec job coming up and thats the kind of surface it needs
Longtime Lurker, I contacted the guy who built and finished the cedar table. He said that he used a two part epoxy finish that was available at Lowes in the paint section. He did not mention how many coats that he applied.
My guess would be EnviroTex 2-part epoxy, which goes on thick, and dries to a high gloss shine.
Today's first happy customer came over and got a piece of 2" one natural edge slab for an outside bar. It was 10' long and I cut some off for him. He also picked up some pine bark slabs for other projects:
(https://forestryforum.com/gallery/albums/userpics/10095/20180629_110016.jpg?easyrotate_cache=1530295652)
Today, second happy customer came to buy some natural edge 2" thick pine slabs to use for seating at a wedding. She looked at renting chairs and she didn't want to pay for them. She searched online and saw where someone else used bales of hay and put planks across them to let people sit on. She bought all I had on hand once she saw want they looked like. So she was happy and thought that she could use them for other things after the wedding. And she gave me a tip as well.
Now, I'll have cut more to have on hand.
Jim Rogers
(https://forestryforum.com/gallery/albums/userpics/10095/20180629_133530.jpg?easyrotate_cache=1530295752)
There is nothing better than a Happy Lady! :)
Jim,
Well done. Always good to see a happy and excited customer leaving.
I think that lady may be back. Are you sure she is just interested in your lumber products? :D
I told her I was getting to old to load that stuff by hand, even with her help. And that my wife wants me to retire.
I told her that I needed to take her picture as a "happy customer" for facebook and the internet.
Jim Rogers
Well, maybe she should get a career in modeling as she does a great job as a happy customer. And I still bet she is back and likely several of her friends. Keep up the good work. ;D
You old goat........no, wait a minute, we already have an old goat :).
Quote from: Jim_Rogers on June 29, 2018, 03:49:24 PM
I told her I was getting to old to load that stuff by hand, even with her help. And that my wife wants me to retire.
I told her that I needed to take her picture as a "happy customer" for facebook and the internet.
Jim Rogers
Are those pine slabs...looks like a good seller. I've been thinking about cutting pine slabs live edge, just for wedding benches...could sell them cheaper than hardwood slabs. Also they look nice and flat, do you store them on your lumber pallets? Thanks Corey
Could just rent them for such occasions! Hope they don't get 'sappy' during the wedding! :D
Quote from: Lawg Dawg on June 29, 2018, 08:13:05 PM
Quote from: Jim_Rogers on June 29, 2018, 03:49:24 PM
I told her I was getting to old to load that stuff by hand, even with her help. And that my wife wants me to retire.
I told her that I needed to take her picture as a "happy customer" for facebook and the internet.
Jim Rogers
Are those pine slabs...looks like a good seller. I've been thinking about cutting pine slabs live edge, just for wedding benches...could sell them cheaper than hardwood slabs. Also they look nice and flat, do you store them on your lumber pallets? Thanks Corey
Corey:
When we had the gathering at Peter's sawmill last month, Bruno from NH told me how he was cutting 2" thick natural edge slabs and selling them as fast as he could produce them. And how he was doing it on facebook marketplace.
I started using marketplace to sell off some old oak slab pieces I had kicking around the yard for some time. I sold all I listed within 36 hours.
I then started cutting some wide 2" thick pine slabs from fresh cut logs. I have mentioned to all customer's that they are fresh cut and could be sappy. And that they should let them dry out a bit. So they have been warned.
As far as storing them; I just put them on a regular lumber stack with regular 1" stickers, but they were only there a few days to a week at most.
I cut one 2" slab at 4:30 one afternoon and listed it, it was sold by 7:30 that night.
They are easy to cut and you don't have to edge them. Just slide them off the mill and they are done. That's about the whole story, that I can tell you.
Jim Rogers
There's a mill around the Norridgewock area. He's on a back road. He had some white pine slabs. Had them stood up outside,by the road,by the buildings,at least 10. Quite the sight.
I guess I could post this here. My "customer" is my Niece. I offered and she accepted a book matched pair of slabs I glued and planned down with my router. She did the finish work and attached the legs.
(https://forestryforum.com/gallery/albums/userpics/30640/Cedar_Table_2.JPG?easyrotate_cache=1474240567)
(https://forestryforum.com/gallery/albums/userpics/30640/Cedar_Table_3.JPG?easyrotate_cache=1474240569)
(https://forestryforum.com/gallery/albums/userpics/30640/Cedar_Table_5.JPG?easyrotate_cache=1474240571)
Stupendous!!! 8)
She did a great job. Looks like some epoxy and a nice satin finish, not too glossy.
Quote from: ljohnsaw on June 30, 2018, 09:40:09 PM
I guess I could post this here. My "customer" is my Niece. I offered and she accepted a book matched pair of slabs I glued and planned down with my router. She did the finish work and attached the legs.
(https://forestryforum.com/gallery/albums/userpics/30640/Cedar_Table_2.JPG?easyrotate_cache=1474240567)
(https://forestryforum.com/gallery/albums/userpics/30640/Cedar_Table_3.JPG?easyrotate_cache=1474240569)
(https://forestryforum.com/gallery/albums/userpics/30640/Cedar_Table_5.JPG?easyrotate_cache=1474240571)
That's beautiful! Yall did a great job!
Quote from: samandothers on July 01, 2018, 09:13:41 AM
She did a great job. Looks like some epoxy and a nice satin finish, not too glossy.
She did this last year. IIRC, she used an epoxy to fill the cracks. The tape on the bottom side didn't contain the epoxy the first time or two. What a mess! It is a dark, dark brown and you can see through the slab in a couple places. The actual finish was not epoxy - but I don't remember what. She is NOT a fan of high gloss and this was right on the verge of too glossy for her. On the small end, the ripple in the grain is mesmerizing!
A kitchen i did for a costumer
It's made of teak wood
(https://forestryforum.com/gallery/albums/userpics/37555/IMG_20180625_102559.jpg?easyrotate_cache=1529965273)
(https://forestryforum.com/gallery/albums/userpics/37555/IMG_20180625_102517.jpg?easyrotate_cache=1529965237)
(https://forestryforum.com/gallery/albums/userpics/37555/IMG_20180625_102538.jpg?easyrotate_cache=1529965235)
A night table, a little gifty for a girl i'm trying to conquer! (https://forestryforum.com/board/Smileys/default/grin.gif)
Also teak wood
(https://forestryforum.com/gallery/albums/userpics/37555/P1010868.JPG?easyrotate_cache=1530457458)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010865.JPG?easyrotate_cache=1530457492)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010866.JPG?easyrotate_cache=1530457357)
Wow love that kitchen.
Happy Birthday Tim.
Nice table. Hope it works out as planned.
Not only can you raise and harvest teak, you gotta pretty nice touch creating with it too!
Looks nice!
Quote from: WV Sawmiller on July 01, 2018, 09:23:31 PM
Happy Birthday Tim.
Nice table. Hope it works out as planned.
I think the night table did the trick, she melted right away. (https://forestryforum.com/board/Smileys/default/grin.gif) It's going great!!
Also i'm pretty good at cooking and baking, so i made a dessert for her and her ma. Here in Latinamerica you can really win a girl if you can cook as a men.
Here is my rope closet, i'm very proud of that work. it was a ton of work.
(https://forestryforum.com/gallery/albums/userpics/37555/P1010265.JPG?easyrotate_cache=1477524038)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010287.JPG?easyrotate_cache=1477524050)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010291.JPG?easyrotate_cache=1477524058)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010293.JPG?easyrotate_cache=1477524066)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010319.JPG?easyrotate_cache=1477524076)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010256.JPG?easyrotate_cache=1477524085)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010314.JPG?easyrotate_cache=1477524076)
(https://forestryforum.com/gallery/albums/userpics/37555/P1010321.JPG?easyrotate_cache=1477524083)
teakwood you should be very proud as it is a very beautiful and creative piece.
I have never seen that done before.
Fantastic work!
I love the photos. I am a wood worker too, however I bought my first Woodmizer LT30 in the 90's and one thing led to another. Well I seem to cut more lumber now than wood work. I still get time to throw a few pieces together.
That is very unusual looking and very nice!
About two years ago i cut up some walnut for a friends uncle. The trees came from his property and he wanted to use them in his basement remodel. He is still in the process of completing his half log walnut stairs. But other than that it is mostly complete! Id say it looks pretty sweet!
(https://forestryforum.com/gallery/albums/userpics/30088/FB_IMG_1533857185840.jpg?easyrotate_cache=1533857492)
(https://forestryforum.com/gallery/albums/userpics/30088/FB_IMG_1533857212319.jpg?easyrotate_cache=1533857475)
(https://forestryforum.com/gallery/albums/userpics/30088/FB_IMG_1533857222246.jpg?easyrotate_cache=1533857457)
(https://forestryforum.com/gallery/albums/userpics/30088/FB_IMG_1533857229516.jpg?easyrotate_cache=1533857384)
That's DOUBLE SWEET :o
Guys gotta real like for walnut!
A nice Saturday project....one of the owners of my biggest customer asked if I could make a round swing for his kids. I grabbed a board to use.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_2698.JPG?easyrotate_cache=1534611352)
Cut and planed to thickness
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_2701.JPG?easyrotate_cache=1534611446)
Couldn't help but put it on the CNC for engraving
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_2704.JPG?easyrotate_cache=1534611566)
Then on to the lathe to finish up (could have cut on the CNC but rounding both sides and sanding is easier on the lathe.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_2708.JPG?easyrotate_cache=1534611696)
sanded and ready for finish (for him to do).
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_2710.JPG?easyrotate_cache=1534611777)
Surprisingly that didn't take long. now what do I do??
A friend of mine a makes custom Muskie fishing rods, ("the fish of 10,000 casts"), turning the wood sections on his lathe. I while back I gave him a few pieces of Black Cherry burl I had cut, which he layered along with Red Cedar, to make this rod.
(https://forestryforum.com/gallery/albums/userpics/47685/IMG_20180916_100327_972.jpg?easyrotate_cache=1537114289)
(https://forestryforum.com/gallery/albums/userpics/47685/IMG_20180916_100323_113.jpg?easyrotate_cache=1537114705)
Back in June, I posted this photo of my "Happy customer" who just bought five 2" thick pine slabs.
(https://forestryforum.com/gallery/albums/userpics/10095/20180629_133530.jpg?easyrotate_cache=1530295752)
Today she sent me some photos of how she used the slabs for seating at a wedding:
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-4.jpg?easyrotate_cache=1537119637)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-3.jpg?easyrotate_cache=1537119637)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-1.jpg?easyrotate_cache=1537119636)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-2.jpg?easyrotate_cache=1537119636)
I think they came out nice.
Jim Rogers
Resonator,
That rod is fine, very fine.
Thanks WDH, I've got more Black Cherry burl to keep him supplied!
A happy customer just sent me some pictures of a three shelf table he made for his mud room using some curly cottonwood I sold him.
(https://forestryforum.com/gallery/albums/userpics/35121/image~94.jpeg?easyrotate_cache=1537662765)
(https://forestryforum.com/gallery/albums/userpics/35121/image~95.jpeg?easyrotate_cache=1537662617)
I think it's kinda purdy fer lowly ole cottonwood.
(https://forestryforum.com/gallery/albums/userpics/22539/FB_IMG_1537677200686.jpg?easyrotate_cache=1537677399)
customer finished a Madrone 3" thick slab 28" wide x 38" at the crotch motorized Desk (https://forestryforum.com/gallery/albums/userpics/22539/FB_IMG_1537673410800.jpg?easyrotate_cache=1537677423)
(https://forestryforum.com/gallery/albums/userpics/22539/FB_IMG_1537678234944.jpg?easyrotate_cache=1537678292)
Madrone is beautiful and my mill has cut many thousands of feet of it before I bought it.
Quote from: caveman on May 29, 2018, 06:12:09 PM
A fellow who bought some cedar from us a couple of months ago sent me a few pictures of his finished table. He is a metal worker by trade and evidently likes shiny wood.
(https://forestryforum.com/gallery/albums/userpics/22883/image~515.jpg?easyrotate_cache=1527631180)
(https://forestryforum.com/gallery/albums/userpics/22883/image~513.jpg?easyrotate_cache=1527631179)
I like the white tube base that he built.
There is plenty of nice looking stuff.
But this just makes me wish we would have some of this cedar here.
Quote from: Darrel on September 22, 2018, 08:40:30 PM
A happy customer just sent me some pictures of a three shelf table he made for his mud room using some curly cottonwood I sold him.
(https://forestryforum.com/gallery/albums/userpics/35121/image~94.jpeg?easyrotate_cache=1537662765)
(https://forestryforum.com/gallery/albums/userpics/35121/image~95.jpeg?easyrotate_cache=1537662617)
I think it's kinda purdy fer lowly ole cottonwood.
I love this too!
Quote from: longtime lurker on February 14, 2018, 06:53:25 AM(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20150324_080625_965.jpg?easyrotate_cache=1518609024)
16 seat table in Queensland Maple. I woulda put turned legs under it but thats what the customer wanted thats what they get I guess. Just glad I didnt have to help shift that thing!
Even the dust collection bin looks cool
Cradle I made for my kids made two they were both having baby's at the same time
(https://forestryforum.com/gallery/albums/userpics/47479/5101171A-F493-4D53-8AB8-9F5D11DF1410.jpeg?easyrotate_cache=1539434403)
They will be family heirlooms.
Interesting table made from a Magic walnut slab.
(https://forestryforum.com/gallery/albums/userpics/14370/IMG_4774.JPG?easyrotate_cache=1539435292)
Haven't been on in a while but here's a couple of pictures of a shed one of my customers built from some spruce I cut.
(https://forestryforum.com/gallery/albums/userpics/21968/IMG_0776.jpg?easyrotate_cache=1541805568)
(https://forestryforum.com/gallery/albums/userpics/21968/IMG_0775.jpg?easyrotate_cache=1541805586)
We just supplied all the flooring and decking and all sorts of bits for this local rebuild of a public venue.
(https://forestryforum.com/gallery/albums/userpics/29851/FB_IMG_1538897261770.jpg?easyrotate_cache=1542097145)
Beautiful!
I don't sell anything, but an acquaintance of mine asked for some help with a mantle, so I thought this slippery Elm log with it's undulating outer surface would be pretty cool. I milled the log and cut the brackets and planed it all for him and hauled it to his house and helped unload it. He stained and finished it.
(https://forestryforum.com/gallery/albums/userpics/16191/IMG_6104.JPG?easyrotate_cache=1542234209)
(https://forestryforum.com/gallery/albums/userpics/16191/IMG_6105.JPG?easyrotate_cache=1542234281)
Brad,
That's a great looking mantle! I really like the end grain and the live edge has a great appeal to it. You did well.
Quote from: Jim_Rogers on September 16, 2018, 01:43:29 PM
Back in June, I posted this photo of my "Happy customer" who just bought five 2" thick pine slabs.
(https://forestryforum.com/gallery/albums/userpics/10095/20180629_133530.jpg?easyrotate_cache=1530295752)
Today she sent me some photos of how she used the slabs for seating at a wedding:
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-4.jpg?easyrotate_cache=1537119637)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-3.jpg?easyrotate_cache=1537119637)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-1.jpg?easyrotate_cache=1537119636)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-2.jpg?easyrotate_cache=1537119636)
I think they came out nice.
Jim Rogers
I had a request a while back to use some 2"x12"x12' pine I had for seating at a wedding. They were also using the hay bales. I had 48 boards they took to use and they were planning to bring them back the following week. They did return them, in a timely fashion, with each neatly cut in half at 2"x12"x6'.
DPatton,
I did too well. I was regretting using that log up as I only had 3 like that. (Woodhog?). The undulating live edge is really cool. I'm going to use the other two logs for myself.
Quote from: hopm on November 14, 2018, 06:04:48 PM
Quote from: Jim_Rogers on September 16, 2018, 01:43:29 PM
Back in June, I posted this photo of my "Happy customer" who just bought five 2" thick pine slabs.
(https://forestryforum.com/gallery/albums/userpics/10095/20180629_133530.jpg?easyrotate_cache=1530295752)
Today she sent me some photos of how she used the slabs for seating at a wedding:
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-4.jpg?easyrotate_cache=1537119637)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-3.jpg?easyrotate_cache=1537119637)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-1.jpg?easyrotate_cache=1537119636)
(https://forestryforum.com/gallery/albums/userpics/10095/Slabs_on_bales-2.jpg?easyrotate_cache=1537119636)
I think they came out nice.
Jim Rogers
I had a request a while back to use some 2"x12"x12' pine I had for seating at a wedding. They were also using the hay bales. I had 48 boards they took to use and they were planning to bring them back the following week. They did return them, in a timely fashion, with each neatly cut in half at 2"x12"x6'.
Ouch!
Today's happy customer had been here before. Today he bought some natural edge oak slabs, a couple of 4' pieces and one 8' piece.
(https://forestryforum.com/gallery/albums/userpics/10095/20181126_105319.jpg?easyrotate_cache=1543261753)
Before he bought some pine slabs and made a bench for around his camp's fire pit.
(https://forestryforum.com/gallery/albums/userpics/10095/12619.jpeg?easyrotate_cache=1543261818)
(https://forestryforum.com/gallery/albums/userpics/10095/12617.jpeg?easyrotate_cache=1543261818)
He ordered some 2"x20"x12' pine slabs for his new project.
Jim Rogers
My happy customer made this from the live edge slabs I sold her.
(https://forestryforum.com/gallery/albums/userpics/35121/image~96.jpeg?easyrotate_cache=1543274726)
Quote from: hopm on November 14, 2018, 06:04:48 PM
I had a request a while back to use some 2"x12"x12' pine I had for seating at a wedding. They were also using the hay bales. I had 48 boards they took to use and they were planning to bring them back the following week. They did return them, in a timely fashion, with each neatly cut in half at 2"x12"x6'.
dang, did you charge for all the boards after that??
This is a little side table built by a "customer". Well hopefully a future customer. Harry contacted me via Facebook after I'd posted something sawmill related on a local group. Turned out we had 2 mutual friends, my sons, as he had been at high school with them. He was wanting to get into woodworking, and looking for sources of wood (on a budget). Turned out his landlord had just dropped a line of small Port Orford Cedars beside his house, so he asked if he could have some, and I milled them on shares. So did I have any other nice woodworking wood? Well I was sawing some Sheoak at another friends place, so I told him if he came and helped he could have a trailer load of boards and slabs etc. After it dried he sorta went off the hand tool only dream. :D Anyway he's now got a basic workshop setup with a some normal power tools and is making some stuff to sell.
Top of this table is some of the Sheoak, with the base is recycled Rimu that I gave him. (I was given it from a another mutual friend, so I figured I better not charge him for it ;) ) The Sheoak is really hard with all sorts of crazy grain, while the Rimu is technically a softwood, it's hardness is up there with red oak or birch etc, and at least 25 growth rings per inch. Nice stuff to work with, even it's old reclaimed 4x2s. Anyway there is no metal in the piece, all tenonned, and the top is dovetailed in place, natural colour, and an oil finish. Hopefully he can make a go of his little venture.
I'm not out any cash for the stuff I've given him, and he put in the hours helping at the mill. So hopefully he can get established an I get to sell him some stuff, or do some custom sawing for him.
(https://forestryforum.com/gallery/albums/userpics/10460/46948349_10215051595476599_3186444972865880064_n.jpg?easyrotate_cache=1543385346)
I like that tongue and groove method of attaching the top.
(https://forestryforum.com/gallery/albums/userpics/32746/45838400_331710067412071_1345417192874704896_n.jpg?easyrotate_cache=1543450082)
How to chew up 150 ton of logs: build a deck.
(https://forestryforum.com/gallery/albums/userpics/32746/45748910_331710007412077_3009230327265624064_n.jpg?easyrotate_cache=1543450609)
(https://forestryforum.com/gallery/albums/userpics/32746/45739848_331690054080739_4862338643374637056_n.jpg?easyrotate_cache=1543450609)
Quote from: longtime lurker on November 28, 2018, 07:10:20 PM
(https://forestryforum.com/gallery/albums/userpics/32746/45838400_331710067412071_1345417192874704896_n.jpg?easyrotate_cache=1543450082)
How to chew up 150 ton of logs: build a deck.
(https://forestryforum.com/gallery/albums/userpics/32746/45748910_331710007412077_3009230327265624064_n.jpg?easyrotate_cache=1543450609)
(https://forestryforum.com/gallery/albums/userpics/32746/45739848_331690054080739_4862338643374637056_n.jpg?easyrotate_cache=1543450609)
Nice! What's the species?
Lemon Scented Gum
A few weeks ago, I was traveling by a customer's place and stopped in to see the pavilion he made for his farm business.
I didn't get to talk to him, as he was suppose to be there but I couldn't see him.
Here is what he built:
(https://forestryforum.com/gallery/albums/userpics/10095/20190422_131116.jpg?easyrotate_cache=1557867254)
(https://forestryforum.com/gallery/albums/userpics/10095/20190422_131126.jpg?easyrotate_cache=1557867253)
(https://forestryforum.com/gallery/albums/userpics/10095/20190422_131212.jpg?easyrotate_cache=1557867253)
It was not one of my designs, and I don't know why he did the double braces thing.
Jim Rogers
the double braces sure give it a unique style.
I bet he added the longer braces when he saw that huge roof dancing around in the wind
Quote from: beav on May 14, 2019, 05:40:10 PM
I bet he added the longer braces when he saw that huge roof dancing around in the wind
most likely
SIL and partner just opened a wood-fired coffee roasting place in Astoria Queens (Mighty Oak Wood Roasted Coffee). Attached are some pics of the wood I sawed for him--counter front=spalted maple; benches=ash, maple; table=walnut. See the nice inlaid coffee bean? Very proud of the boy.....All the best, Rob.
(https://forestryforum.com/gallery/albums/userpics/13967/Mighty_Oak_3.jpg?easyrotate_cache=1558366032)
(https://forestryforum.com/gallery/albums/userpics/13967/Mighty_Oak_2.jpg?easyrotate_cache=1558366029)
(https://forestryforum.com/gallery/albums/userpics/13967/IMG_1549.JPG?easyrotate_cache=1558366032)
Slabs we produced for a hair salon in Los Angeles.
(https://forestryforum.com/gallery/albums/userpics/35190/Commercial_salon_2.jpg?easyrotate_cache=1558370821)
(https://forestryforum.com/gallery/albums/userpics/35190/Commercial_salon_3.jpg?easyrotate_cache=1558370865)
(https://forestryforum.com/gallery/albums/userpics/35190/Commercial_salon_4~0.jpg?easyrotate_cache=1558370954)
(https://forestryforum.com/gallery/albums/userpics/35190/Commercial_salon_slabs.jpg?easyrotate_cache=1558370992)
One of customers snagged a cherry skin off the firewood pile and built a cat tree for his daughter, now all her friends want one.
(https://forestryforum.com/gallery/albums/userpics/22539/output.jpg?easyrotate_cache=1568513687)
Today, a customer sent me some pictures of the ash counter tops he made from lumber I sawed on site at his place south of Boston, many years ago.
I think they came out nice.
2" piece
(https://forestryforum.com/gallery/albums/userpics/10095/Alec_2_in_ash_counter_top.jpg?easyrotate_cache=1568748571)
1" pieces:
(https://forestryforum.com/gallery/albums/userpics/10095/Alec_1_inch_counter_top-a.jpg?easyrotate_cache=1568748570)
(https://forestryforum.com/gallery/albums/userpics/10095/Alec_1_inch_counter_top-b.jpg?easyrotate_cache=1568748570)
Jim Rogers
Took some time to read through this thread, some incredible projects that's for sure. Many of them leave a person speechless as to the quality of the work done.
ash countertops in a vintage travel trailer renovation
(https://forestryforum.com/gallery/albums/userpics/18098/babs_counter~2.jpg?easyrotate_cache=1569594846)
I cut the pine siding for this cool barn my son built, two 40` containers with steel knee walls welded to the inside edges, steel truss`welded up from a salvage yard..end result, a 40x40 shop
(https://forestryforum.com/gallery/albums/userpics/18098/lee_barn.jpg?easyrotate_cache=1569595054)
My first attempt at an epoxy pour table, curly maple
(https://forestryforum.com/gallery/albums/userpics/18098/river_table~1.jpg?easyrotate_cache=1569595463)
a customers table from some maple I had
(https://forestryforum.com/gallery/albums/userpics/18098/mapletable~1.jpg?easyrotate_cache=1569595876)
(https://forestryforum.com/gallery/albums/userpics/49610/IMG_1184~0.jpg?easyrotate_cache=1569623204)
Cut some 4/4 White pine live edge for a friend's pantry project.
Alanh, how did you actually do the epoxy pour and what would you do different the next time? I'm needing to do a table as well and never used epoxy before either?
I used a product called Ecopoxy from jeffmack supply, They also have a great website with instructions on everything from prep to figuring how much expensive epoxy you need. mine did come out good but I would pour a little higher next time as you lose some epoxy due to seeping and absorbtion, the videos show how to seal the forms and use some silicone caulk to dam up around you pour so it can be initially poured high. Make sure whatever you use for a form is non stick. I used clear packing tape over plywood which worked fine but I was warned that could go bad.
book matched end for end coffee table. ERC. cardiologist buddy.
(https://forestryforum.com/gallery/albums/userpics/51041/23BCE6CC-A03B-49B0-B04B-4D22A8BC679C.jpeg?easyrotate_cache=1569675528)
alanh, thanks for the information.
That is about the only coffee table I could ever do. I really hate coffee tables but that one looks really kool. Good movie to :)
My customer that came from Michigan made this table with one of his students.
His student made the table to give to his mom.
This is one of the yellow birch slabs I sawed from the 40" log I had.
I sold all the slabs,I wish I kept a couple.
(https://forestryforum.com/gallery/albums/userpics/36349/received_589977145070100.jpeg?easyrotate_cache=1577038321)
(https://forestryforum.com/gallery/albums/userpics/36349/received_2659702577484238.jpeg?easyrotate_cache=1577038320)
Thursday, I traveled out to see a friend/customer. He showed me two of his projects with wood I cut for him.
One is a cherry cabinet he made for his bathroom:
(https://forestryforum.com/gallery/albums/userpics/10095/20200109_093825.jpg?easyrotate_cache=1578754591)
The other is some quarter sawn white pine he used for cabinets in his laundry room of his timber frame house:
(https://forestryforum.com/gallery/albums/userpics/10095/20200109_093658.jpg?easyrotate_cache=1578754661)
Jim Rogers
So I had a call from friend today. His Dad was part of a National Rock Carving event in town. But he hadn't planned on how to display his work. So he calls up his son and says "Can you build me a stand for my rock, by tomorrow"
Harry had all sorts of fine woodworking ideas, but then we got the sketch. He wanted an up market pallet :D
OK, it all becomes doable now. He called around and we rough saw some Macrocarpa Cypress so it
fits in his Rav4. Discussed the construction methods, and I told him to pre-drill the holes and use beefy screws. :D
Couple of hours later, he sends me a pic of the finished masterpiece. ;D
(https://forestryforum.com/gallery/albums/userpics/10460/83035449_118606426088376_131617030812991488_n.jpg?easyrotate_cache=1579769860)
Not sure how big his rock is, but the runners are 4x4 and the planks are 6x2. It ain't "fine" woodworking, but it will support a small truck. ;D
It should last a while. It is about the same size as my little front porch and a whole lot stronger.
With the stone in place
(https://forestryforum.com/gallery/albums/userpics/10460/83329156_2682249101897670_3135237465070108672_n.jpg?easyrotate_cache=1579850535)
My stones don't look like that!!!
I expected A LOT bigger stone when I saw the picture of the pallet!
@Ianab (https://forestryforum.com/board/index.php?action=profile;u=460) I wonder if people will be looking more at the pallet. looks great.
Quote from: thecfarm on January 24, 2020, 07:47:06 AM
My stones don't look like that!!!
??? ??? ??? ::) ::) ::) :o :o :o :-\ :-\ :-\ :-\ Oh I got it @cfarm :) :) :) I thought you meant something else!
This is the event's web page, lots of pictures in the gallery of the different pieces. It's actually quite cook as they set up in a small park on the foreshore in New Plymouth, and you can just walk past and look at the various pieces taking shape. They use local volcanic basalt rocks, hence most of them favour power tools. :D
http://www.tekupenga.com/ (http://www.tekupenga.com/)
Although I didn't saw these, they were sawn by a friend of mine and he passed along my contact info to the lady for drying. She asked if I knew anyone who could make a table for her outdoor kitchen out of the dried lumber. I quickly raised my hand, discussed some design ideas and after showing her some of my previous work, I was commissioned to build this.
They wood was horrible! An old bushed out red oak yard tree that was in the very early stages of rot. Some bad sawing and excessive stress caused me to rip a lot of the wide boards down so that I could flatten them and maintain most of the thickness. There were a lot of voids to fill with epoxy so I decided to screed the entire top to fill the very coarse grain with the same black. The result was stunning!! The table is 4x9, the legs are 3" aluminum tubing powder coated satin black. The finish is waterlox marine finish.
A really nice project. The table now sits only a few feet from where the tree once stood. I love my life!!
Best thing is, there is about 300 bf of material left that I will have more projects once she decides what they will be.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_4265~1.JPG?easyrotate_cache=1580478552)
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_4261.JPG?easyrotate_cache=1580478184)
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_4264.JPG?easyrotate_cache=1580478379)
bathroom vanity from red oak, ready to get installed with a granite top, never mind the crooked handles, pic was taken before they were bolted on
(https://forestryforum.com/gallery/albums/userpics/18098/vanity.jpg?easyrotate_cache=1580480291)
i gave some spalted oak from the yard of my wife's aunt Judy. i have engraved some calls, and milled some wood for a Amish guy who with only a few tools, makes custom turkey and deer calls.
(https://forestryforum.com/gallery/albums/userpics/51041/A4B68BE7-3053-4597-874C-0F505E1BE279.jpeg?easyrotate_cache=1580951120)
(https://forestryforum.com/gallery/albums/userpics/51041/F17A25E7-8907-46B9-A352-94828A0505A7.jpeg?easyrotate_cache=1580951122)
a slate call with a hedge striker. AJO (Aunt Judy Oak) body. :D
(https://forestryforum.com/gallery/albums/userpics/51041/C5B031FF-A310-4CD8-8D31-24728B5EB7A1.jpeg?easyrotate_cache=1580951130)
(https://forestryforum.com/gallery/albums/userpics/51041/B154AA4E-E3FE-4BBB-8FD2-1695E1CA58CA.jpeg?easyrotate_cache=1580952193)
glass with a turkey feather behind, scratches area for striker. AJO body and hedge (Osage orange) striker.
(https://forestryforum.com/gallery/albums/userpics/51041/0A4A031F-7BAC-4854-A548-30F573029F50.jpeg?easyrotate_cache=1580952279)
mouth calls for deer. AJO, walnut,hedge and mahogany (I think).
Raym,
The top turned out great! When you poured the epoxy and scraped off the access did you then let it dry and sand it back to the wood top leaving the grain and fill areas exposed?
Did the Waterlox dry and adhere well to the epoxy fill?
The legs are very nice and look great with the finish and top. Are the screws on one side set in holes and those on the other side set in slots to allow movement?
I am sure the customer was happy the project looks great!
Quote from: samandothers on February 06, 2020, 09:31:24 AM
Raym,
The top turned out great! When you poured the epoxy and scraped off the access did you then let it dry and sand it back to the wood top leaving the grain and fill areas exposed?
Did the Waterlox dry and adhere well to the epoxy fill?
The legs are very nice and look great with the finish and top. Are the screws on one side set in holes and those on the other side set in slots to allow movement?
I am sure the customer was happy the project looks great!
Thanks.....Once the epoxy cured I scraped the entire top with a cabinet scraper. Very little sanding. The heat buildup while sanding worried me especially the small grain filled areas.
The Waterlox did very well. Obviously it didn't absorb into the resin but laid down nicely and there was no flaking after it cured.
Yes on the mounting holes, I allowed for about 1/2 inches of movement. This table sits outside so this
was is a big concern
A few weeks ago John and I surfaced some oak slabs that we have had for a while. They were used to build a bar in a new restaurant somewhere near Port Charlotte.
The woman that did the construction is coming to get more oak this week for another project for another customer.
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3970.JPG?easyrotate_cache=1582414645)
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3969.JPG?easyrotate_cache=1582414643)
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3968.JPG?easyrotate_cache=1582414643)
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3966.JPG?easyrotate_cache=1582414642)
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3967.JPG?easyrotate_cache=1582414641)
I sawed a few small cypress logs into 2"x6"s a few weeks ago and a friend of mine, who owns a cabinet shop, built this picnic table out of them. The table will get branded with several of the area's cattlemen's brands and then will be auctioned off. It will be a fundraiser for the Polk County Junior Cattlemen. Neither of us charged anything for our services. Randy, my friend, reported that the table, which was made from green cypress, is heavy.
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3961.JPG?easyrotate_cache=1580871189)
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_3962.JPG?easyrotate_cache=1580871189)
River Oak. :D Looks good!!
Have not read this thread for a while.
All of the wood projects look good!!!
I bet those bar tops cost an arm and a leg.
Ironically, the woman who did these tops was fired after another employee left something on the uncured epoxy after she left at 2 a.m. I was told that she had 130 hours in the bar tops. She has four more jobs lined up since this one, primarily because folks have seen what she is able to do. She will drive up here Thursday to get more wood and is in need of more after that.
John and I need to find more oak to saw. We were oak poor until a couple of weeks ago. We decided to cut up a lot of slabs to make benches the day before the bar project purchase occurred. The hot box is running right now loaded with oak.
Caveman, great job! Those look fantastic. What did you mount your slabs to prior to the pour?
I got asked about doing one of those river tables a while back, the wood of choice wasn't cheap... Then calculated it at bit under 40 gallons of epoxy and guessed the labour at 100 hours and frightened them away with the price.
Now I'm glad I lost it... If she's got 130 hours in that one I'd seriously underestimated the time factor required.
Quote from: samandothers on February 23, 2020, 09:23:19 PM
Caveman, great job! Those look fantastic. What did you mount your slabs to prior to the pour?
I did not do the pour. We just sawed, dried and planed the wood.
I think the base was plywood though. There are more slabs in the hot box now. John and I will take them out tomorrow after work and try to get them ready to go out on Wednesday or Thursday.
(https://forestryforum.com/gallery/albums/userpics/32746/Joe_Slavern_-_boonjie_oak_1.JPG?easyrotate_cache=1584015197)
(https://forestryforum.com/gallery/albums/userpics/32746/joe_slavern__-_boonjie_oak_3.jpg?easyrotate_cache=1584016650)
Northern Silky Oak Cardwellia sublimis aka "Australian Lacewood" to the rest of the world. The real one... not the half poor imitation Southern Silky Oak with the smaller medullary rays that is mostly what you get on the market today even here, or the South American Leopardwood that a lot of high end wood and veneer dealers will try and pass off as "Lacewood" to get a price lift on something similar to Southern Silky, again with the smaller rays
And a real nice grain matching job by one of my favourite customers. I'll have to come back with a better picture of it - this isn't showing what he's really achieved. I love working with guys like this.
Somewhere in the thousands of tons of 6x2's I've lost sight of this: the work that brings me joy. Time for a rethink methinks.
Annnnnnndddddddddddddddd another piece of Northern Silky bobs up in my inbox... this piece sent to a friend in Pa and being played with by Warmoth to his specifications.
(https://forestryforum.com/gallery/albums/userpics/32746/Silky_Oak_Strat_Body_Projected_-_25.jpg?easyrotate_cache=1584017758)
Two in one evening, you ever get that feeling you're being sent a message???
Beautiful pieces.....Silky Oak and me don't mix well as I have a severe allergy to the dust. What I had left in stock I gave away, beautiful but a trip to the doctors office when I saw it.
Quote from: tule peak timber on March 12, 2020, 09:16:18 AM
Beautiful pieces.....Silky Oak and me don't mix well as I have a severe allergy to the dust. What I had left in stock I gave away, beautiful but a trip to the doctors office when I saw it.
Yeah that would be Southern Silky
Grevillia robusta. I saw it occasionally, its a dryland species but some wanders in here sometimes on a contract sawing job: gives me watery eyes and a runny nose. And a bit too brittle to be really workable as a cabinet species IMHO.
Northern Silky is a different thing altogether.... big rainforest tree. I get a bit of contact dermatitis when sawing it but once the sap is dry it's fine.
Got some planted in your Ironbarks huh? (Actually heres a real good question for you Rob: anyone actually stick a bandmill in that Ironbark, and do they do any good or spend all their time sawing waves? I'm a bit curious about that lately.... time for a toy upgrade again)
On the iron bark, only a little bit has passed through here as millwork. In Southern California there are dozens of species of eucalyptus and I've stopped milling any of them in favor of other wood that sells better. The market for walnuts, cedar, and redwood is almost limitless and where the hour meter needs to spin....
On the dermatitis from silky I needed steroid shots , it was so bad- I looked like a Leper....
I still use a little iron bark now and then for entry door thresholds and decorative square plugs on furniture and that's it...... ;D
A customer just sent me these pictures of a "cabinet" that he had built from some Red Oak that I QS for him.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_7204.JPG?easyrotate_cache=1584029381)
The top. Ask me if I hit the mark with that QS. ;D
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_7205.JPG?easyrotate_cache=1584029437)
Front view.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_7206.JPG?easyrotate_cache=1584029506)
And of course a quartering view. I have no idea exactly what it is. The lower front center panel appears to be suspended by track rollers and travels to the left. Also there are no pulls on what appears to be drawers on the front and the center opening is for.....?
Whatever the purpose is, I thought that he did a superb job with his craftsmanship. This piece is presently in the back of a pickup and traveling toward Jacksonville, FL. move_it
That looks like a good "timeout" hut. Just need a latch with a lock! ;)
Beautiful wood & work by all. MM looks like a custom island with a dog kennel under it. Wife showed me one with same idea off of Pinterest. Just add the handles for the drawers & sliding door & it's done.
Great work! Did they happen to mention the stain used on that project? Currently 1/4 sawing RO. Can't wait to see those kind of results.
I don't know about the stain/finish, but the dark color says walnut or maybe something even darker that was applied and wiped off. It also appears that the top and side were treated differently. ??
Quote from: Magicman on March 12, 2020, 01:24:14 PM
I don't know about the stain/finish, but the dark color says walnut or maybe something even darker that was applied and wiped off. It also appears that the top and side were treated differently. ??
Ok. Thanks MM. I'll test a few shades. Something about that shade/ finish is what I love.
I just had a customer come and buy wood for one of those kennels. Unlike your customer's kennel, the one I supplied the wood for ( blue stained yellow poplar) will have solid wood halfway up from the bottom with the bars from the middle of the sides to the top. It is a dog jail ;D.
That looks like a good replacement for a 1980 island in this clinic! Excellent doggie jail.
JMoore took some live oak and glued up a top that another friend of ours built a base for that fits over a dog crate. This one will be auctioned off at one of our neighboring school's FFA event this Saturday night. One of these days a freebie material/job may pay off. If not, we did a little good for the neighborhood.
(https://forestryforum.com/gallery/albums/userpics/22883/IMG_4002.JPG?easyrotate_cache=1584124116)
Great idea.
now the dog crate looks like a piece of furniture! nice donation!!
Awesome an inspirational.
Today we started milling material for the reclaimed wood wall as part of the architectural millwork package in the New Natural Resources Headquarters building in Sacramento, CA. Below is a link to the YouTube showing this project.
I have been behind the scenes on this job for one year, 3-1/2 mos. and today we finally physically began work. Hard won, long fought.
New Natural Resources Headquarters Building Project 2021 - YouTube (https://www.youtube.com/watch?v=KhxFF22tTNQ)
very cool and thanks for the video. if a picture is worth a thousand words. ...
Is this the "Brown" project?
This is the "Brown Project" link. The name of this job is actually Rise Hollywood and ironically we just got re-engaged on another contract for additional millwork in this building about a week ago. The "brown" refers to the horrific gyrations required to create the tones of brown for the interior millwork project. Beetle kill pine with voodoo #9 mix. LOL
The link below is the architectural rendering of the apartment building project set to open soon.
The Rise Hollywood in Los Angeles, CA | Prices, Plans, Availability (https://www.buzzbuzzhome.com/us/the-rise-hollywood)
Tule I know you are very busy, but we all miss you when you are gone! (off line)
Probably will takes a while, a year? But would like to see that same video in real time. :o Bring the forest to the city. Looks like some wide "boards" will be used too.
A while ago, I posted a picture of me cutting a hand hewed beam down the middle so the customer could use it in his house remodel project:
(https://forestryforum.com/gallery/albums/userpics/10095/20200225_152055.jpg?easyrotate_cache=1582830867)
Late yesterday, he sent me some pictures of his completed project:
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_2770.jpg?easyrotate_cache=1586875661)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_2765.jpg?easyrotate_cache=1586875661)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_2766.jpg?easyrotate_cache=1586875661)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_2768.jpg?easyrotate_cache=1586875661)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_2769.jpg?easyrotate_cache=1586875660)
Jim Rogers
I am kinda fortunate to have in my customer list (and as friends) two of the best woodturners around. And I say fortunate because (1) they're both great blokes and (2) they give me good press with others with the same interests and (3) that keeps the "not really commercial lumber but too good to throw out" pile thinned out. It's handy knowing blokes who will take wood in sizes down to inch by inch.
(https://forestryforum.com/gallery/albums/userpics/32746/Jim_McConnachie_1.jpg?easyrotate_cache=1588589743)
(https://forestryforum.com/gallery/albums/userpics/32746/Jim_McConnachie_3.jpg?easyrotate_cache=1588589747)
Nice hollow form about 11" across done in some of my Queensland Maple/ Northern Silver Ash / Black Bean
(https://forestryforum.com/gallery/albums/userpics/32746/geoff_whaling_3.jpg?easyrotate_cache=1588589749)
(https://forestryforum.com/gallery/albums/userpics/32746/geoff_whaling_1.jpg?easyrotate_cache=1588589751)
Pens done in (predominantly) Northern Silver Ash. I've got a bit of a rep for being able to keep it free of mould which helps move things along nicely because as we all know keeping whites bone white and not salt and pepper takes some doing. And y'all will note the nice banding done in Black Bean and Silver Ash in the background. Both of these guys do their own inlay work - by hand, the old fashioned way.
Would take more patience than I ever have to do either of the above, and the intarsia work they do is a whole lot of patience above and beyond again.
And... I dunno... I find this kind of stuff more satisfying than yet another truckload of 6 x 2's. One is wood as art, the other wood as commodity: good for the soul as opposed to good for the wallet perhaps. But looking at fine woodwork makes me happy in ways that seeing just another house does not.
Slab bench/desk in Queensland Maple. Yeahhhhhhhhh, shame with some bits of wood, you then pile stuff on them and cant see it no more.
(https://forestryforum.com/gallery/albums/userpics/32746/melissa_maple_slabs_1.jpg?easyrotate_cache=1589577179)
(https://forestryforum.com/gallery/albums/userpics/32746/melissa_maple_slabs_2.jpg?easyrotate_cache=1589577174)
Of all the species I cut QMP is probably my favourite and this is why.... if you sell it to someone who's prepared to put in the work to finish it well it is always a joy to behold. Which is why its regarded as one of the worlds great cabinet timbers I guess.
And I think I'm learning to love epoxy infill - 10 years ago I'd have ripped that back into a couple clear boards either side of the heart shake when sawing because we only sold clear wood. And I still get people walk in here and ask me why I dont throw out the slabs with holes in them :D
(https://forestryforum.com/gallery/albums/userpics/32746/melissa_maple_slabs_3.jpg?easyrotate_cache=1589596140)
I don't know what finished was used. I do know that when you can see detail like that frosting in the casement windows reflecting in the surface: you've done a whole lot of work. I don't have enough words for just how impressed I am with the standard of this lady's work. I think I want to give her a job
Purrdeeee...!
That finish is amazing!
very amazing!!!
Yesterday, a customer sent me a picture of the white pine slab he made into a table for sitting around his fire pit patio area.
I think it looks ok but not sure if he filled the ant holes or not.
(https://forestryforum.com/gallery/albums/userpics/10095/16232.jpeg?easyrotate_cache=1590591823)
I think we pulled that out of the trash pile when he was here.
Jim Rogers
Here is a project I've been working on for a while. It cracks me up that you can take blue stained pine and call it "denim pine" and charge a premium for it. These are 1-3/8 interior pre-hung barn doors. There were 16 total and 3 "sliding" barn doors. All of this lumber I sawed and dried. Really pretty stuff. They are tongue and groove, style and rail construction with floating tenons for additional strength because of the weight. The field is tongue and groove also.
For the barn doors, I make the wheels myself. They are done with 2 layers of white oak glued up cross grain for strength.....enjoy
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_5466.JPG?easyrotate_cache=1590750428)
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_5463.JPG?easyrotate_cache=1590750476)
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_5456.JPG?easyrotate_cache=1590750795)
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_5461.JPG?easyrotate_cache=1590750548)
Awesome!
Love the door hardware, pure genius!
X2 on the hardware.
Is that commercial hardware or fabricated? Looks easy to whip up from scratch. I don't recognize the wheels but they look perfect for indoors.
Have any better pictures of the wheels? everything looks phenomenal.
Quote from: Crusarius on May 29, 2020, 10:51:12 AM
Have any better pictures of the wheels? everything looks phenomenal.
When I started doing these barn doors, I struggled with sourcing the hardware because I didn't want to but it from China. Then one morning, the idea of making them out of wood just appeared to me. I credit the good Lord for that....
(https://forestryforum.com/gallery/albums/userpics/33431/wheel.jpg?easyrotate_cache=1590915228)
Raym, I really like those wheels. Great idea!
Did you use a bushing in the center or rely on the wood? Router for wheel slot?
Quote from: samandothers on May 31, 2020, 09:38:52 AM
Did you use a bushing in the center or rely on the wood? Router for wheel slot?
There is a 7/8" bearing in the center that is pressed in with a 3/8" bolt through hole. The wheel slot is just cut on the lathe, about 1/4" deep.
Have you had any issue with them cracking along the grain?
The doors and hardware are awesome!
Quote from: terrifictimbersllc on June 01, 2020, 05:29:55 AM
Have you had any issue with them cracking along the grain?
No. They are made up with 2 layers of 1/2" glued up cross grain. Very solid....
Didn't get a picture with the customer (this was for a builder so customer want there) but here is another barn door. Loved how this turned out. Not a true bookmatched set but very close. 2 slabs glued up is a whole lot easier to make a door than a true style and rail. Spalted ambrosia maple.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_5502.jpg?easyrotate_cache=1602837794)
Here is a couple Items I made for a photographer friend / client. They will be used in a Santa set up for Christmas portraits.
(https://forestryforum.com/gallery/albums/userpics/51245/IMG_1751.jpg?easyrotate_cache=1603411312)
(https://forestryforum.com/gallery/albums/userpics/51245/IMG_1756.jpg?easyrotate_cache=1603411138)
(https://forestryforum.com/gallery/albums/userpics/51245/IMG_1754.jpg?easyrotate_cache=1603411382)
Quote from: Jim_Rogers on May 27, 2020, 11:13:23 AM
Yesterday, a customer sent me a picture of the white pine slab he made into a table for sitting around his fire pit patio area.
I think it looks ok but not sure if he filled the ant holes or not.
(https://forestryforum.com/gallery/albums/userpics/10095/16232.jpeg?easyrotate_cache=1590591823)
I think we pulled that out of the trash pile when he was here.
Jim Rogers
That gives me hope for some of my worm wood! Pine bores.
John and I recently sawed some longleaf pine that was purchased by some friends of ours (former students) to use in the construction of a cabin they are building. They also picked out a 21' cedar log to place in the center of the structure.
(https://forestryforum.com/gallery/albums/userpics/22883/17CE9E2B-14DC-4F2D-90D7-38FFDAC0AF24.jpeg?easyrotate_cache=1603795867)
(https://forestryforum.com/gallery/albums/userpics/22883/289AE82E-FD20-46FC-80F0-6A979A6B943B.jpeg?easyrotate_cache=1603795867)
nice work @Dana Stanley (https://forestryforum.com/board/index.php?action=profile;u=41245) , that should add to the experience for the kids.
Quote from: doc henderson on October 27, 2020, 08:47:37 AM
nice work @Dana Stanley (https://forestryforum.com/board/index.php?action=profile;u=41245) , that should add to the experience for the kids.
Thanks it was fun to make. I want to find more work like that as I enter retirement! This week I'm working on a 12x16 Barn for my wife (a tough customer) timber frame, mortise and tenon. I put a gambrel roof on it, I built one once 30 years ago on a house. I will post in the section for that when I'm done! I could have built 3 - 2x4 buildings in the same time!!! All the first beams I cut w my mill.
A customer sent me a photo of the slab he made into a bar top:
(https://forestryforum.com/gallery/albums/userpics/10095/Ryan_s_bar_top.jpg?easyrotate_cache=1604599080)
I think he did a nice job.
Jim Rogers
looks nice but i think its upside down. To easy to set a drink on the edge and lose it.
Quote from: Crusarius on November 05, 2020, 05:43:47 PMTo easy to set a drink on the edge and lose it.
Sell more drinks that way! ;)
I tend to orient my live edge the other way for that reason for tables and benches.
Man, you guys (Youse guy's for our northern brethren, You'uns for those around the Eastern Ohio/WV Northern Panhandle/Western PA area or our Y'all for our deep South highly cultured and elite member) are killing me. The last time I showed a bench I had made with the wide side up y'all beat me up (again). I normally position my slabs like Jim's customer did his bar top but sometimes reverse it if I have a good reason like I felt led to do so. :D
Jim,
I really like that bar top.
Dana,
I truly love that cedar log in the center of the cabin. I can see it getting used for so many purposes! Very well done. Keep on posting.
I would think for a bench you would want the narrower side on top because it may be more comfortable to sit on. For a bar, the wider side on top might be better for extra width and for holding more drinks.
I think if this Particular slab was flipped over, he would not be able to enjoy the live age as well on the angle that it is.
To me it's like a natural chicago style bar rail. You can lean your elbow into while drinking! Might have to get rid of the stools for that though...
I don't sell wood, but a guy I used to work with when I was 19 in a stamping press shop, and I also watched him and my neighbor build a custom hot rod in the late 70's that toured the country and was in playboy magazine, wanted to build a table for him and his girlfriend's new condo in Chicago overlooking lake Michigan. So I let him pick a slab, one of my widest ones by chance. It was air dried, but I then had it kiln dried by another guy for him. He decided to finish the cracking down the middle and split the slab into two pieces. It was pretty easy as there were ant nest/tunnels in the center of this slab. Not too bad, but it would all get filled. Then I flattened each half on my mill planer. It started out at 8.5 feet long, but he cut it down to about 6 feet or so I think to fit the space best. I helped glue up some live edge walnut boards to make the island you see to fill some of the space. He wanted to work on it in his basement, but I warned him not to store it there due to moisture. Well 8 months later he came back with them and I had to flatten them again as they cupped a bit from being down there for so long. He took it from there. It came out really nice I think! Here's the car he build back then- he's very experienced in body and paint work so I knew the epoxy and finishing would be no problem for him.
(https://forestryforum.com/gallery/albums/userpics/16191/thumbnail_IMG_9553.jpg?easyrotate_cache=1608693675)
(https://forestryforum.com/gallery/albums/userpics/16191/8446255370_e6dd8be5c0.jpg?easyrotate_cache=1608693836)
Nice team project that turned out fantastic 👍
That is really a beautiful piece.
Opps!
Realized I did not share this years Christmas project. As always, I like to challenge myself with something new and decided to do a set of kitchen cooking utensils. I am the designated stirrerer in the kitchen and wanted some nice wooden spoons and spatulas.
The pedal box is made from ambrosia maple
(https://forestryforum.com/gallery/albums/userpics/33431/group.jpg?easyrotate_cache=1612452216)
The rest of these were made from Cherry (which was only air dried) and I think it is easier to work this way. I really like the feel of the handles and my wifes favorite one is the strainer. It does work nice in that you can drain a pot with out having to dig out a colander.
(https://forestryforum.com/gallery/albums/userpics/33431/spoon.jpg?easyrotate_cache=1612452417)
(https://forestryforum.com/gallery/albums/userpics/33431/spatula.jpg?easyrotate_cache=1612452483)
(https://forestryforum.com/gallery/albums/userpics/33431/strainer.jpg?easyrotate_cache=1612452520)
Nice. Handmade products which made in wood really nice. I love it
Those will get passed down.
Finnish sauna currently under construction. Used the sound wood and some spalted red pine (non-structural) for framing lumber, some of the larger spalted planked out for siding or reserved for interior planking. Had to make quick use of 2 trees killed by flood stress/pine bark beetle. Rafters and some framing lumber are black spruce. Remainder of Black Spruce sawn 3/4 and reserved for battens/random lumber. A large jack pine made up majority of the siding planks and some of the plank roof decking. This project is all happening off-grid with only a small generator to run the table and miter saw for edging and trimming. Raw logs propped up and slabbed to point of portability in the woods using the chainsaw mill, finished for best use in camp. Lots of blood, sweat and tears here!
Interior picture is my sauna at home completed 2 years ago. Interior of this one will look similar, although balsam fir will likely be used for interior paneling along with some of the 3/4 spalted red pine held in reserve.
(https://forestryforum.com/gallery/albums/userpics/64590/sauna3~0.jpg?easyrotate_cache=1612535411)
(https://forestryforum.com/gallery/albums/userpics/64590/sauna2~0.jpg?easyrotate_cache=1612535464)
(https://forestryforum.com/gallery/albums/userpics/64590/saunainterior.jpg?easyrotate_cache=1612535322)
(https://forestryforum.com/gallery/albums/userpics/64590/lumber_kit.jpg?easyrotate_cache=1612535339)
Quote from: Sauna freak on February 05, 2021, 09:38:10 AM
Finnish sauna currently under construction.
I'm confused, is your sauna finished or under construction? ;D :D :D
(Sorry, could not resist, just ignore me. :laugh:)
Quote from: Old Greenhorn on February 05, 2021, 10:55:02 AM
Quote from: Sauna freak on February 05, 2021, 09:38:10 AM
Finnish sauna currently under construction.
I'm confused, is your sauna finished or under construction? ;D :D :D
(Sorry, could not resist, just ignore me. :laugh:)
This one at my hunting camp is under construction. The one at home is "completed," in the sense that it's fully functional, but still could use a few finishing touches that I never seem to find the time for, as seems to be the case with most of my projects.
This one is Finnish unfinished, unfinished. Considering Swedish Finish on some of the lumber in addition to the Japanese torch finish exterior. The one at home is Finnish, Unfinished, but finished finished exterior, and is kinda Finished.
Best answer ever.
not a customer project, one of my honeydew projects, Bathroom vanity, white oak with a walnut top,
(https://forestryforum.com/gallery/albums/userpics/18098/vanity~1.jpg?easyrotate_cache=1612545919)
another one, curved birch slab window ledge table for the family cabin in Vermont
(https://forestryforum.com/gallery/albums/userpics/18098/birch_ledge.jpg?easyrotate_cache=1612546376)
Awesome Alan!
I like that vanity!!
Love them both - simple clean lines and let the wood do the talking. Great jobs!
Thanks guys,
This customer's project is not finished but it is coming along. He is a former student of mine from the late 1990's. He is building a gun room. The ceiling has 1/4" steel so it is essentially a safe. He specifically wanted knotty cypress so that it would not be boring so John and I sawed up some knotty cypress yard trees and dried them for him. He came back yesterday and just about cleaned us out of 1 x 6 cypress. The ceiling is done in red cedar. He is machining tongues and grooves on all of the cypress. The top set of cabinets all open upwards so that he can store long guns in cases rather than leaning them up in a corner. I enjoy seeing the work that he does.
(https://forestryforum.com/gallery/albums/userpics/22883/FF108CC7-2617-4908-8784-97E2BD72224D.jpeg?easyrotate_cache=1614084323)
(https://forestryforum.com/gallery/albums/userpics/22883/C9C09303-6AD3-4B03-BB9F-3120D2EFC77A.jpeg?easyrotate_cache=1614085753)
(https://forestryforum.com/gallery/albums/userpics/22883/A32ABE11-7110-4341-976B-437BDD7CC89E.jpeg?easyrotate_cache=1614084326)
(https://forestryforum.com/gallery/albums/userpics/22883/ED039962-D1DA-4355-B0E8-428404109E9B.jpeg?easyrotate_cache=1614085840)
(https://forestryforum.com/gallery/albums/userpics/22883/C1C72309-5E3F-4E26-A282-4D6315F84FA9.jpeg?easyrotate_cache=1614084329)
I am anxious to see it when he is finished.
Wow, good lookin armory. :)
nice job
A couple super simple projects from customers.
(https://forestryforum.com/gallery/albums/userpics/36163/94221464_222686045836265_7840373094161055744_n.jpg?easyrotate_cache=1615335944)
(https://forestryforum.com/gallery/albums/userpics/36163/90962300_208507707041454_2411619150246969344_n.jpg?easyrotate_cache=1615336098)
The young man who built the "armory" came back and bought quite a bit of blue pine this afternoon. He showed me the finished pictures of his gun room. I think he did an exceptional job.
(https://forestryforum.com/gallery/albums/userpics/22883/06DAD372-4812-44B0-807F-2681487FE618.jpeg?easyrotate_cache=1617060318)
(https://forestryforum.com/gallery/albums/userpics/22883/B8A3C0B4-A62C-4C08-B2D4-A427376DDCDF.jpeg?easyrotate_cache=1617060331)
(https://forestryforum.com/gallery/albums/userpics/22883/E5939068-E585-49F8-ABBD-B610C1F77AAC.jpeg?easyrotate_cache=1617060349)
(https://forestryforum.com/gallery/albums/userpics/22883/448583ED-B17B-4D0D-94BD-CED14267E79C.jpeg?easyrotate_cache=1617071077)
(https://forestryforum.com/gallery/albums/userpics/22883/99B2ADFF-6AB4-4578-990D-9D1FE592D2D4.jpeg?easyrotate_cache=1617071098)
As cool as live oak is to me and as difficult as it is to saw and dry properly it has not been a great seller
(https://forestryforum.com/gallery/albums/userpics/22883/A3BB2101-90CC-486E-88E0-25A1E3CB492E.jpeg?easyrotate_cache=1617586140)
for us in board form. A couple of weeks ago a guy from Orlando bought all of the s4s we had on hand for a fraction of its worth (we needed the rack space). Anyway, tonight he sent me a couple of pics of a table top he built out of some of the live oak he got from us a few weeks ago.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_7562.JPG?easyrotate_cache=1589457552)
Here is some lumber that Luke and I sawed last year. Ceiling, flooring, and kitchen island top.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_9543.JPG?easyrotate_cache=1618613855)
And here it is now; Flooring.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_9540.JPG?easyrotate_cache=1618613850)
Flooring plus wall paneling between the shelves.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_9542.JPG?easyrotate_cache=1618613850)
Flooring plus the kitchen island top yet unfinished.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_9544.JPG?easyrotate_cache=1618613855)
Flooring plus you can see a bit of ceiling.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_9546.JPG?easyrotate_cache=1618614825)
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_9547.JPG?easyrotate_cache=1618614826)
And V-Groove porch ceiling almost completed. It was finished before installing.
Love the ceiling to floor windows. Somebody's pet is really going to like that.
Floors look great too!
JJ
The guy who built the live oak table top just sent me a picture of the finished table and wants more live oak boards. Surprisingly the live oak boards have not been a big seller for us and we usually end up sawing our live oak into live edged slabs.
MM, the floors and counter top look incredible.
(https://forestryforum.com/gallery/albums/userpics/22883/73F11726-3624-4C85-A665-164BAE3788BB.jpeg?easyrotate_cache=1618874498)
Those tapered legs look nice. Just straight square ones look clunky to me.
Danny, I still need to bring you a live oak log or two. I agree you on the legs.
Just before Covid hit last year I finished a 3 month long saw job for a friend who was building his own house. He brought me SYP logs and I sawed and air dried about 8000 bd ft for siding plus a few beams. My wife and I went to his daughter's 1 year old birthday party yesterday and got a tour. Take a look.
(https://forestryforum.com/gallery/albums/userpics/13036/IMG_1574.JPG?easyrotate_cache=1621251392)
(https://forestryforum.com/gallery/albums/userpics/13036/IMG_1571.JPG?easyrotate_cache=1621251391)
(https://forestryforum.com/gallery/albums/userpics/13036/IMG_1573.JPG?easyrotate_cache=1621251390)
(https://forestryforum.com/gallery/albums/userpics/13036/IMG_1570.JPG?easyrotate_cache=1621251388)
Black is an unusual color for a house but I thought it looked great in the setting it is it. Inside looks like an art gallery but I didn't cut for that.
Great looking place! Looks like furring strips under the horizontal siding. Should help keep it dryer and cooler in the summer.
Quote from: caveman on March 29, 2021, 10:26:37 PM
The young man who built the "armory" came back and bought quite a bit of blue pine this afternoon. He showed me the finished pictures of his gun room. I think he did an exceptional job.
(https://forestryforum.com/gallery/albums/userpics/22883/06DAD372-4812-44B0-807F-2681487FE618.jpeg?easyrotate_cache=1617060318)
(https://forestryforum.com/gallery/albums/userpics/22883/B8A3C0B4-A62C-4C08-B2D4-A427376DDCDF.jpeg?easyrotate_cache=1617060331)
(https://forestryforum.com/gallery/albums/userpics/22883/E5939068-E585-49F8-ABBD-B610C1F77AAC.jpeg?easyrotate_cache=1617060349)
(https://forestryforum.com/gallery/albums/userpics/22883/448583ED-B17B-4D0D-94BD-CED14267E79C.jpeg?easyrotate_cache=1617071077)
(https://forestryforum.com/gallery/albums/userpics/22883/99B2ADFF-6AB4-4578-990D-9D1FE592D2D4.jpeg?easyrotate_cache=1617071098)
This project turned out pretty awesome. Kudos to that guy for not only his collection, but having the space to dedicate a securable room to his hobby. Just fantastic.
(https://forestryforum.com/gallery/albums/userpics/64514/20210516_165945~0.jpg?easyrotate_cache=1621538461)
(https://forestryforum.com/gallery/albums/userpics/64514/20210517_182002.jpg?easyrotate_cache=1621538519)
(https://forestryforum.com/gallery/albums/userpics/64514/20210517_182002.jpg?easyrotate_cache=1621538519)
Pavilion is complete, great project with the wife and grandkids. Thanks everyone on here for the wealth of information I found on this forum.
very calm, peaceful, and beautiful. could be a chapel with the benches.
Quote from: Durvin Wick on May 20, 2021, 03:26:56 PM
(https://forestryforum.com/gallery/albums/userpics/64514/20210516_165945~0.jpg?easyrotate_cache=1621538461)
(https://forestryforum.com/gallery/albums/userpics/64514/20210517_182002.jpg?easyrotate_cache=1621538519)
(https://forestryforum.com/gallery/albums/userpics/64514/20210517_182002.jpg?easyrotate_cache=1621538519)
Pavilion is complete, great project with the wife and grandkids. Thanks everyone on here for the wealth of information I found on this forum.
That came out great. How did you joint the benches?
The slabs had some rot, the wife used epoxy and dyed it brown to fill in the cracks.
After the slabs air dried we just hit them with a 4" belt sander.
So....Being partially retired from home building, I still get to build a couple houses a year. This one, I am nearing completion and the customer had some timbers that were dated to 1878 from a family barn somewhere in New York. He asked if I could use them to make a mantle for his fireplace. I dont know if I have ever seen rings so tight and it appears that this may have started as a 16" (ish) log. I'm guessing about 160 years old. That would make it a seedling somewhere in the 1700's.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_6372.JPG?easyrotate_cache=1623581244)
I had 3 timbers to work with. I only found one that seemed to be free of metal.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_6373.JPG?easyrotate_cache=1623581372)
I put on a new (resharp) blade and it sawed like a breeze.
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_6384.JPG?easyrotate_cache=1623581289)
Count them if you want to. I didnt.....
(https://forestryforum.com/gallery/albums/userpics/33431/IMG_6382.JPG?easyrotate_cache=1623581257)
Installation was a little tricky because they were very heavy. The legs and top header (8"x5") were anchored into studs with 6" timber anchors and the top mantle (10"W x 8"T x 6'L) was also anchored into wall studs.
Needless to say, they were very pleased.
Some of the B&B siding I've been sawing, sure makes me want to build a new barn....
(https://forestryforum.com/gallery/albums/userpics/55094/20211203_110017.jpg?easyrotate_cache=1638827246)
(https://forestryforum.com/gallery/albums/userpics/55094/20211203_110042.jpg?easyrotate_cache=1638827236)
I picked up this boatload (2) of pecky cypress slabs from a mill I was driving by coming back from Florida a couple years back, finally got around to doing a multi color epoxy pour bartop to replace the one I built from too green black locust 10 years ago,
(https://forestryforum.com/gallery/albums/userpics/18098/cypress~2.jpg?easyrotate_cache=1638986990)<br
(https://forestryforum.com/gallery/albums/userpics/18098/pecky_bar1~1.jpg?easyrotate_cache=1638987050)
(https://forestryforum.com/gallery/albums/userpics/18098/pecky_bar_2~1.jpg?easyrotate_cache=1638987081)
>
That is definitely one of the nicest bar tops I have seen. Nice work.
Great job on the bar top. I've never seen pecky cypress in a Boston Whaler.
Thanks guys, it definately was a pita keeping the epoxy from following the "peckies' and running out the bottom. In hindsight (which is always 20/20) it would have been way easier to build a mold and immerse the entire thing in one color but we had decided on the multi color.
Putting them in the boat was a much easier solution than being "that guy" and tying them on the roof of the car for a 1400 mile trip.
Beautiful bar top. Very nice job. I like the dive helmet on the corner shelf under the TV also.
Brent
Thanks, the dive helmet is an ice bucket in disguise....
I cut these 2 slabs about 5 or 6 years ago.
(https://forestryforum.com/gallery/albums/userpics/43396/886B2EA8-9F1D-4EC8-8E41-669C8E7FCEC4.jpeg?easyrotate_cache=1639710267)
(https://forestryforum.com/gallery/albums/userpics/65416/s-l1600.jpg?easyrotate_cache=1639714865)
(https://forestryforum.com/gallery/albums/userpics/65416/__028229.JPG?easyrotate_cache=1639714942)
(https://forestryforum.com/gallery/albums/userpics/65416/__0_28129.jpg?easyrotate_cache=1639715275)
(https://forestryforum.com/gallery/albums/userpics/65416/__0.jpg?easyrotate_cache=1639715306)
Recently had someone ask me to cut some Red Oak blocks he could use as anvil bases. I was happy when he sent me pictures of the finished product. I love anvils...
That looks Awesome 💪
Customer/neighbor rebuilt his deck with an RO tree cut on his property and milled on my mill. I was leery about oak and steel making contact but it was his choice. It was finished with Eco Wood finish and the workmanship is excellent.
(https://forestryforum.com/gallery/albums/userpics/13036/IMG_0247.jpg?easyrotate_cache=1639740643)
We have been at the Florida State Fair the past couple of days with our students and their market hogs. My uncle and his former assistant principal have become accomplished woodworkers in their retirement. My uncle's former assistant principal (uncle was the high school principal) was my 9th grade civics teacher, football and wrestling coach when I was in junior high. John and I have given them quite a bit of wood and sold them a little over the years.
(https://forestryforum.com/gallery/albums/userpics/22883/C3AA291A-DE4A-414B-A925-1E85CF1A5FAF.jpeg?easyrotate_cache=1644634965)
Today, while at the fair, I went down to see my former coach as he was doing a turning demonstration. He had a few bowls that he turned on display. Most of them were from wood we sawed; Pecan, sweetgum, sycamore and maybe a few more species.
As a sidenote, when I was 14, I dropped weight to wrestle 165 and outweighed my coach. Sometimes he would wrestle me in practice. I was strong for a kid but did not have the technique required to be an elite wrestler. I'll tell you that this guy was a formidable opponent. I thoroughly enjoyed visiting with them and seeing them showcase their talents. My uncle was doing a demonstration on making bandsaw boxes.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_1810.JPG?easyrotate_cache=1644638046)
Here is one being built with framing lumber that Luke and I sawed. I will be back sawing the rest of the 1X12's for the B&B siding Friday.
Quote from: Magicman on February 11, 2022, 10:56:18 PM
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_1810.JPG?easyrotate_cache=1644638046)
Here is one being built with framing lumber that Luke and I sawed. I will be back sawing the rest of the 1X12's for the B&B siding Friday.
Nice to see your hard work turn into something that will last many lifetimes.
Here are links to sawing some of this framing lumber: LINK (https://forestryforum.com/board/index.php?topic=108941.msg1745709#msg1745709) and LINK (https://forestryforum.com/board/index.php?topic=113386.msg1833701#msg1833701)
The cabin is being built over the concrete slab that the lumber is stacked on shown in Reply #1070.
I had a friend stop by to get a board for a house his son owns.
I had just cut this slab off and just gotten it on my stack to dry.
He really liked it, after seeing the picture of it installed it really looks good, I hate to think what it will do as it dries.
(https://forestryforum.com/gallery/albums/userpics/65100/bunkyscounter.jpg?easyrotate_cache=1645969451)
Very pretty, but straight off the saw? Did he put a finish on it? I don't think he's gonna like what happens next.
I warned him that it will shink/warp/split and he took it.
I was told there are only 2 screws holding it in place.
that is good. if it was really fastened down well, he might find his garage door getting in a bind when he tries to open and close it. :D :D :D
I had a guy looking for a mantle, I had a 6" thick walnut slab that I was planning to cut in half, he wanted it, asked how long it would take to dry, I replied I cut it a year ago so probably another 5... he took it, saying he would secure it real good to the stone so it wouldn`t move...I advised against. He sent a picture a while back of it twisted with the rocks it pulled out of the fireplace still attached.
A fellow I've known for quite some time stopped in a month or so ago wanting a live edged slab to put on top of a Singer Sewing Machine base. He ended up purchasing an 8' pine slab from us. We were able to run it through the planer and cut it to his specifications. He sent me a picture of it a few days ago. Unfortunately, he has pancreatic cancer, and his wife also has a terminal disease and is worse off than he is currently. They are living their lives and keep getting up and pushing forward, which I find commendable.
(https://forestryforum.com/gallery/albums/userpics/22883/D4A85A45-503D-4F8C-8919-AE48741CFF1F.jpeg?easyrotate_cache=1646619296)
He insisted that the knot be on the desktop.
This is a Burr Oak slab I sold to a young couple who are remodeling a house. Turned out really nice!
(https://forestryforum.com/gallery/albums/userpics/44189/Burr_Oak_Slab_Island.jpg?easyrotate_cache=1646929742)
8) Beautiful!
When I was a young kid, 7-8 maybe? Dad made himself a bar like that from pecky cypress. He also made a full-size pool table from the same cypress.
This was all part of a remodel of his "workshop" into a gameroom. Today we would call it a man-cave, I guess.
John and I were brought a large live oak log over a year ago to saw a 7"x14"x8' square beam, free of heart/juvenile wood to be used as a mantle for a high dollar house being built by a local contractor on a local lake as his own residence. We chainsawed off one side in order to make it a bit more manageable. The guy just wanted the mantle and one slab. We sawed the mantle and eight or nine slabs out of the log. When the customer came to pick up the mantle, he saw the slabs and decided that he wanted those too. We did not blame him, but we were hoping to end up with them as their color was the dark, chocolate brown.
Anyway, he got one of his friends who, coincidentally is a former student/friend of mine (the young man who built the cypress gun room) to build his dining room table out of the live oak slabs that were surplus after sawing his mantle out of the log.
(https://forestryforum.com/gallery/albums/userpics/22883/A81EC089-0CC9-461C-87CB-297784F1F6F1.jpeg?easyrotate_cache=1647737266)
(https://forestryforum.com/gallery/albums/userpics/22883/8A8D6D28-3B4F-40B6-82A4-E219FFB0898F.jpeg?easyrotate_cache=1606263951)
(https://forestryforum.com/gallery/albums/userpics/22883/E6A735C3-C7B1-439F-B7FC-DE876F9C74AE.jpeg?easyrotate_cache=1606263953)
That is a fine table.
Very nice workmanship, but it's going to take 3 men and a strong boy to move that table around.
Quote from: Nomad on March 20, 2022, 05:00:04 AM
Very nice workmanship, but it's going to take 3 men and a strong boy to move that table around.
No kidding. John and I touched every slab out of that log several times. We loaded them into a trailer with sides by hand. Unloaded them by hand when he brought the slabs back to be dried in the kiln. Hand stacked them into the kiln due to them not fitting our pallets and then loading them back into the same trailer with high sides. We also got an opportunity to move them a time or two the day we sawed the log. Even after coming out of the kiln, those live oak chunks remain heavy. That is another thing I really like about cypress. After it is dry, it makes a body feel strong.
But your body loses some principle, not just interest when you handle those heavy slabs. I have gotten pretty good at handling the big wide heavy ones. One reason I am not interested in sawing any over 10 feet long. Call Jake.
Nice table. I like the base design especially.
The builders brief was for a decking timber that would have an extended service life despite being fully weather exposed in the wet tropics region. I can think of maybe a dozen species world wide that can do that, though I'm sure there's others I don't know of.
The bling was just a bonus.
We normally save this for dance floors because of its exceptionally high resistance to indentation and ability to take a polish (as well as the wow factor when we start hand selecting boards), but being one of the worlds most naturally decay resistant timbers it was a natural for the job.
(https://forestryforum.com/gallery/albums/userpics/32746/trp_deck_3.jpg?easyrotate_cache=1648730293)
(https://forestryforum.com/gallery/albums/userpics/32746/trp_deck_5.jpg?easyrotate_cache=1648730289)
(https://forestryforum.com/gallery/albums/userpics/32746/trp_deck_4.jpg?easyrotate_cache=1648730285)
(https://forestryforum.com/gallery/albums/userpics/32746/trp_deck_6.jpg?easyrotate_cache=1648730293)
(https://forestryforum.com/gallery/albums/userpics/32746/TRP_Deck.jpg?easyrotate_cache=1648730298)
Needless to say the customer is happy. Me too, I still get a kick out of seeing pretty boards.
what kind of wood, and finish? @longtime lurker (https://forestryforum.com/board/index.php?action=profile;u=22746)
I wonder if that is a finish or just flooding the surface with water. ???
44" wide, 78" long red oak solid slab that we milled several years ago.
(https://forestryforum.com/gallery/albums/userpics/13296/Table_2C.jpg?easyrotate_cache=1648777173)
(https://forestryforum.com/gallery/albums/userpics/13296/Table_1C.jpg?easyrotate_cache=1648777172)
Just the builder hosing it off post construction, the homeowner will be doing the finish themselves. The shame of it is that in 12 months it'll probably be a muddy brown colour or starting to silver off depending... but you can see why it's one of my favourite flooring species.
Sometimes you just have to enjoy the moment.
what species? guess I missed it.
Syncarpia glomulifera, commonly known as Turpentine or Red Lustre.
It's actually a fascinating timber... it has a high level of oleoresins in the bark and sapwood with a distinctive turpentine smell (hence the name) and is rated as the most durable wood in the word for wharf pilings because the extractives make it resistant to marine borers. Somehow or another despite the extractives it's also rated as one of the most fire resistant: Untreated timber of this species is equivalent to 'fire retardant treated' timber when tested in accordance with AS3837, which can be a selling point for public buildings and high rises that have to factor fire retardant properties into account.
It's heavy enough at around 60 lb/ft
3 at 10% MC, with a super fine interlocking grain that means it polishes well with plenty of ribbon, and is very resistant to indentation - stiletto heels won't mark it - so its regarded as one of Australia's premium flooring and decking species... but it seems to saw and work well unless it's full of silica, which isn't uncommon.
And most mills do not saw it. Reason being is it has a shrinkage rate of somewhere around 13% tangential and 7% radial, and will turn itself inside out if you don't take a lot of care in seasoning... and the superfine grain means it is a slow dryer that cannot be pushed through a kiln without significant - and very careful - air drying first. From a business perspective that's a drawback because your money is tied up in the stuff for an extended period but the margins if you can hold out that long are quite good.
We, of course, are not most mills. Despite it's issues its one of my biggest money makers and I can't get enough of the stuff.
If you harvested that locally :P, you are way way south of here..
gorgeous wood, thanks for sharing
JJ
And a considerable distance to the east as well. :D
Live oak table built by a customer using wood he got from us earlier in the summer. He sent me the pics yesterday.
(https://forestryforum.com/gallery/albums/userpics/22883/3199CB57-1164-4520-8BD9-14B525AC625C.jpeg?easyrotate_cache=1659923585)
(https://forestryforum.com/gallery/albums/userpics/22883/15CC8BB2-D0C9-4DBE-8D88-31FA37AD7082.jpeg?easyrotate_cache=1659923603)
Not fancy finished work but I am real proud of the timber frame barn this customer made from the posts and beams we cut over the last year.
(https://forestryforum.com/gallery/albums/userpics/38064/IMG_3245.JPG?easyrotate_cache=1659749833)
The same guy who built the live oak table pictured a few posts ago, sent me some pics of another piece of furniture he built this week. John and I quartersawed a large laurel oak that I cut down in a neighbor's yard.
This customer typically prefers to build using live oak due to being able to make a glass smooth finish, but he deviated from his normal routine when he saw the laurel oak. He ended up buying all that we had, somewhere around 400 bf, if I remember correctly. What I do remember is that when he paid, I let him know that he overpaid by over $200. He told us that we did not charge him enough for what he was getting. He has bought wood from us several times and is a valued customer.
(https://forestryforum.com/gallery/albums/userpics/22883/864470FF-254D-4576-AA4A-7BC774AB1F04.jpeg?easyrotate_cache=1673713604)
(https://forestryforum.com/gallery/albums/userpics/22883/C093FDAF-3B40-4B7B-A3FB-FF2159274043.jpeg?easyrotate_cache=1673706671)
(https://forestryforum.com/gallery/albums/userpics/22883/A94AA2C7-660E-4E86-BDBA-920EB871DEEC.jpeg?easyrotate_cache=1673706669)
Those are the best kind of repeat customers that you build a business with. When their number comes up on the phone ID, you start smiling. ;D
Beautiful table. I'd never want a table cloth to go on it but I'm afraid most women would be quick to put one on.
(https://forestryforum.com/gallery/albums/userpics/71467/Credenza.jpg?easyrotate_cache=1674220399)
I love this credenza piece from one of our best customers. Walnut and resin.
That is very cool!!
I would love to see more of that. That is incredible.
Wow! :o
I hope there is some backing wood reinforcing all that diagonal grain.
Yeah, those guys put out some truly special pieces. You can find them on pretty much all social media @thenorthernjoinery. I believe they post the most pictures on Instagram.
On this project I was both the sawyer and the customer:
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_3456.JPG?easyrotate_cache=1674077829)
Planed/edged these 1X6's down to 7/8 X 5 Wednesday. Then this morning 6 of us built a ramp at the church to eliminate a step.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_3459.JPG?easyrotate_cache=1674344287)
That is a 4' flat and then 7' slope toward the boxes that are holding the last board down until the Liquid Nails sets.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_3460~0.JPG?easyrotate_cache=1674344288)
And then it extends 9 more feet to the existing stairs. The joist are 2X6's on 12" centers. Carpet will be placed over this.
We have had one person to trip and fall thankfully without any injury. This should take care of the problem for the future.
Quote from: WV Sawmiller on August 07, 2022, 10:20:04 PM
Not fancy finished work but I am real proud of the timber frame barn this customer made from the posts and beams we cut over the last year.
(https://forestryforum.com/gallery/albums/userpics/38064/IMG_3245.JPG?easyrotate_cache=1659749833)
That looks amazing. Out of curiosity what is the process of mounting timbers on top of those cement piers? From here they just look like cement blocks but the picture is small, and hard to tell. Or do my eyes deceive me?
I finished the project at the church that I started on the 21st to eliminate a step and make the hallway wheelchair available.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_3468~0.JPG?easyrotate_cache=1674953708)
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_3469.JPG?easyrotate_cache=1674953702)
See Reply #465 above.
I finished laying the 2X2 carpet squares today and these old bones are dog tired.
I have to put the shoe molding down and raise the door headers 7" and reinstall the door casings/facings so not much left to do..
So if Magic Man installed it, that makes it... "Magic Carpet"? ??? ;D
:D Actually the magic was the last square that went down. I sailed off to bed about 8:30 last evening and my butt muscles were a bit sore this morning.
My plan is to go back Tuesday and install the shoe molding and thresholds.
Well done, good and faithful servant!!!!!
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_3474.JPG?easyrotate_cache=1675278047)
My contribution is finished. All of the baseboards, shoe molding, thresholds, and doors are completed.
There is one more item left to do which is a handrail but someone else volunteered to do that.
looks great, inviting, and well done.
Most of the pictures here are woodworking projects or crafts. I am proud to post some the lumber I sawed in use by a many time repeat sawing and sales customer to build a 3 BR addition on his cabin/home here in WV. What we finished sawing today is earmarked for more work here.
(https://forestryforum.com/gallery/albums/userpics/38064/IMG_3489.JPG?easyrotate_cache=1678155556)
This white pine siding I sawed off one big pine here on my place. I sold him 1060 sf of mostly 1/2" X 8" assorted (mostly 12') lengths. He has completely sided the addition of a 3 br/1 Ba addition.
(https://forestryforum.com/gallery/albums/userpics/38064/IMG_3490.JPG?easyrotate_cache=1678155726)
Here are 3 ancient American chestnut beams I resawed a week ago for this customer. His buddy was up from Orlando FL area helping him hang the drywall and such and they needed the beams for immediate use so they brought them over and I resawed them to 7" X 8.5" 15' beams. These will be used to support a sleeping loft the customer figures will be a big hit for visiting grandkids. I sawed stairwell runners for the ladder yesterday and today out of the customers logs.
EDIT/ADD-ON: BTW I asked the customer how he got the beams in place and he said he hooked a chain fall to the brace above and used it to lift them He said they were too heavy for him and his buddy to lift, hold and work with otherwise.
(https://forestryforum.com/gallery/albums/userpics/38064/IMG_3491.JPG?easyrotate_cache=1678156040)
These 4" X 8" tulip poplar crosspieces/braces (I don't the proper term for them) are some I sawed and sold this customer a year or so back. (I had forgotten about sawing them but they sure look nice!).
I don't know about the rest of you but I felt like a new parent seeing my workmanship being used for a forever home for a customer and as an attraction for his kids and grandkids to come visit. He told me yesterday he had to make a video of me sawing the lumber as his 3 y/o grandson wanted to see how it was done. 8)
Start them out young!!
I have a 25 year old grandson that love trees.
This one's a little different. It's not from lumber sawn off my logs but from the logs themselves. I have a really good neighbor who is a chainsaw carver and I have been supplying him with white pine logs for the last few years. He lives just a few hundred feet down the road so I carry logs on the tractor forks out of the woods and down the road to his house.
(https://forestryforum.com/gallery/albums/userpics/11157/DSC06601~0.JPG?easyrotate_cache=1680950114)
He peels the bark off the logs, cuts them into 3foot sections and then quarters each section.
(https://forestryforum.com/gallery/albums/userpics/11157/DSC06683.JPG?easyrotate_cache=1680950351)
(https://forestryforum.com/gallery/albums/userpics/11157/DSC06685.JPG?easyrotate_cache=1680950376)
Then he carves a bear from each piece.
(https://forestryforum.com/gallery/albums/userpics/11157/DSC06676.JPG?easyrotate_cache=1680950499)
(https://forestryforum.com/gallery/albums/userpics/11157/DSC06678.JPG?easyrotate_cache=1680950529)
(https://forestryforum.com/gallery/albums/userpics/11157/DSC06681.JPG?easyrotate_cache=1680950562)
He sells them as fast as he can make them. Those nine bears went to New Hampshire yesterday.
Keep on cutting.....Cutter
A very nice job!!!
@cutterboy (https://forestryforum.com/board/index.php?action=profile;u=1157) Is there any chance of getting your friends contact info. My wife would love something like that. We had some bears like that 30 years ago
that were made out of material for outdoors. Got them in PA. People driving by the house thought they were real cubs.
David
They've got that "So cute!" look people with vacation cabins love. (And love to buy). ;D
I have a local friend who has been doing bears, pumpkins, mushrooms and other stuff for nearly 40 years. Mostly he does realistic stuff like this:
(https://forestryforum.com/gallery/albums/userpics/52103/Bertha_bear.jpg?easyrotate_cache=1681235432)
Back in November he did these 3 bears into a stump at a house in Kingston:
(https://forestryforum.com/gallery/albums/userpics/52103/Hoppys_stump_bears.jpg?easyrotate_cache=1681235433)
The Momma in that one stands at just under 6' and I drive past it often. Most recently he did these as a commissioned work. More whimsical, I think inspired by the Grateful Dead:
(https://forestryforum.com/gallery/albums/userpics/52103/Grateful_bears.jpg?easyrotate_cache=1681235432)
His bears are all over the east coast in businesses and homes. Bear carving seems to be good business if you are good at it. :)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230511_144940.jpg?easyrotate_cache=1683795155)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230511_144945.jpg?easyrotate_cache=1683795154)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230511_144952.jpg?easyrotate_cache=1683795154)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230511_145005.jpg?easyrotate_cache=1683795153)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230511_145014.jpg?easyrotate_cache=1683795152)
The builder invited me to come have a look at this one today, he's pretty proud of it and I have to say he's done a job with an exceptional level of fit and finish.
Me I'm a sawmiller and all I do is hack logs apart, but I do find it personally satisfying to see a job done right, rather than a job done cheap. And my timber always comes up a treat - I saw some of the hardest and most durable timber species in the world and what I often forget is how gorgeous they can be with a good finish rather than an el cheapo one.
That's my cheap decking, side lumber off the shotgun mix of hard red species we run for framing. I need to get some pictures of the good stuff one day.
A super nw pa cherry log made some incredible lumber and my customer made this beautiful table out of it. Thats how its supposed to happen(https://forestryforum.com/gallery/albums/userpics/34928/33929.jpeg?easyrotate_cache=1683802952)
One of our repeat customers sent me some pics of his latest project using some laurel oak that he got from us.
(https://forestryforum.com/gallery/albums/userpics/22883/803F722D-D4A6-421D-A4A2-BBFA8BF3813A.jpeg?easyrotate_cache=1685406570)
(https://forestryforum.com/gallery/albums/userpics/22883/2F7D5970-8AF2-4A3D-ABB7-C487BF87DBD2.jpeg?easyrotate_cache=1685407744)
(https://forestryforum.com/gallery/albums/userpics/22883/F21502A4-D478-46DF-A606-82BEEF259F45.jpeg?easyrotate_cache=1685407772)
Beautiful Mission style table!! Did he fume the oak or stain it? That's the closest to original look as I've ever seen.
I assume he stained it, but I'll ask the next time I see or talk to him. He wants some more quartersawn oak, and I need to let him know how much we have on hand.
Over the last couple years I've made a few trips back to the homeland for mobile milling jobs. I've made 2 stops a friend's place to mill up some Doug Fir for a man cave project that he had planned. He still has a few finishing touches to go, but it's pretty much completed and all with lumber that I milled.
(https://forestryforum.com/gallery/albums/userpics/43396/IMG_3474.jpeg?easyrotate_cache=1685448840)
(https://forestryforum.com/gallery/albums/userpics/43396/IMG_3473.jpeg?easyrotate_cache=1685448889)
We went to drop off a couple of slab tops for this job for an island and a peninsula ( I didn't think to get pics of those) The crew had started using the whack of 1x12 oak we dropped off a week of so ago.
(https://forestryforum.com/gallery/albums/userpics/10017/FxWd1.jpg?easyrotate_cache=1686962264)
Quote from: Brad_bb on November 14, 2018, 05:26:25 PM
I don't sell anything, but an acquaintance of mine asked for some help with a mantle, so I thought this slippery Elm log with it's undulating outer surface would be pretty cool. I milled the log and cut the brackets and planed it all for him and hauled it to his house and helped unload it. He stained and finished it.
(https://forestryforum.com/gallery/albums/userpics/16191/IMG_6104.JPG?easyrotate_cache=1542234209)
(https://forestryforum.com/gallery/albums/userpics/16191/IMG_6105.JPG?easyrotate_cache=1542234281)
4-1/2 years ago I milled this mantle and it was still fairly wet inside. It's red elm/slippery elm. I warned my friend the potential problems with sealing it while not yet dry. And that it may check and warp. Well after 4.5 years there are no checks, and he says it hasn't moved. Is it still wet inside? Who knows. I think it should be.... I find it strange that nothing has happened after I warned him about it. IT is red elm, maybe that has something to do with it. I haven't used it in a wood working project yet myself.
He used the uber slow dry method! :)
That makes sense, checks, splits, and collapse are all a result of a steep moisture gradient between shell and core. Sealing the exterior will be slowing the drying down to the point there is no gradient. We oil big beams to slow drying for the same reason.
Turpentine, one of my premium framing flooring and decking species... the wet look (or how it would come up under a high gloss internal finish as flooring) and dry under an untinted natural oil finish.
Coat of oil a year and that timber will be good forever, it's considered exceptionally durable and hard wearing even by Australian standards.
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230630_163957.jpg?easyrotate_cache=1688795675)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20230630_164001.jpg?easyrotate_cache=1688795674)
I love that deep red colour, we've got a T&G floor gone down that's supposed to be sanded and polished in the next few weeks and I can't wait to see it.
One of the woods that put's the "hard" in Aussie Hardwoods. Generally used if you want something more durable (and better looking) then concrete. :D
https://en.wikipedia.org/wiki/Syncarpia_glomulifera
Now that's a top grade look that will hold its value.
I've been meaning to share some pics here for a while and then this customer sent me a few.
The posts in these pics were milled last year and he's just started using them. He commented that they all came out great, were super straight and he was super happy with them!
(https://forestryforum.com/gallery/albums/userpics/22463/IMG_5939.jpg?easyrotate_cache=1689174547)
(https://forestryforum.com/gallery/albums/userpics/22463/IMG_5937.jpg?easyrotate_cache=1689174548)
(https://forestryforum.com/gallery/albums/userpics/22463/IMG_5935.jpg?easyrotate_cache=1689174549)
(https://forestryforum.com/gallery/albums/userpics/22463/IMG_5934.jpg?easyrotate_cache=1689174549)
Those are 8x8 Ponderosa Pine posts and I'm waiting to see what he does with the rest -- and yes, this house is going to be beautiful!!!
OJH it looks like the one in the front may have warped a bit!!! :D :D :D great work.
One of our tables in Arkansas.
(https://forestryforum.com/gallery/albums/userpics/35190/Deurksen_dining_table_Jul23.jpg?easyrotate_cache=1689539889)
This is a Cypress job that I sawed in June last year:
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_2526.JPG?easyrotate_cache=1656034374)
Some of the Cypress logs before sawing.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_2836.JPG?easyrotate_cache=1658879177)
But the cut list was not the lumber but rather it was the slabs. :o
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_4379.JPG?easyrotate_cache=1689542137)
The slabs were then pressure washed to remove the bark.
(As a side note, you may recognize the loader and logs in the background as being where I am presently set up and sawing.)
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_4360.JPG?easyrotate_cache=1689542143)
The debarked slabs were then loaded onto trailers and hauled to Arkansas.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_4361~0.JPG?easyrotate_cache=1689542156)
The lodges are stick built with conventional 2X6 framing and the Cypress slabs are installed and chinked representing log construction.
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_4364.JPG?easyrotate_cache=1689542162)
The building on the right has been stained and chinked. The interiors have this same slab construction so the look is the same both inside and out.
Wow, that is a very cool look!
One of our island tops installed.
(https://forestryforum.com/gallery/albums/userpics/35190/Goorsky_Island_top_Aug23.jpg?easyrotate_cache=1691792709)
Looks great.
@Jim_Rogers (https://forestryforum.com/board/index.php?action=profile;u=95)
I recall you had a gristmill building project a year or two ago... I ran into a man today whose family mill had been disassembled and stored and is or has been installed in a park in a new mill building, Halifax VA. Long shot but I was wondering if they are the same.
I was at the county fair and an obvious grandfather and grandson walked by my mill and I had to stop them and get a pic, they were the perfect pair. We struck up a conversation and that was when he got into his roots. He had not run the water powered gristmill all that much, he had gravitated towards the water powered sawmill... so we talked some more.
I like the stools too!!
Quote from: Don P on August 11, 2023, 10:21:18 PM
@Jim_Rogers (https://forestryforum.com/board/index.php?action=profile;u=95)
I recall you had a gristmill building project a year or two ago... I ran into a man today whose family mill had been disassembled and stored and is or has been installed in a park in a new mill building, Halifax VA. Long shot but I was wondering if they are the same.
I was at the county fair and an obvious grandfather and grandson walked by my mill and I had to stop them and get a pic, they were the perfect pair. We struck up a conversation and that was when he got into his roots. He had not run the water powered gristmill all that much, he had gravitated towards the water powered sawmill... so we talked some more.
The mill building is at the fairgrounds in South Boston, I believe. You can visit it when they have the antique tractor show in May each year.
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1141.jpg?easyrotate_cache=1525800706)
(https://forestryforum.com/gallery/albums/userpics/10095/IMG_1144.jpg?easyrotate_cache=1525800706)
There is no stream or river there for the wheel to be powered. They told me that they were going to build a concrete tank and pump the same water from the tank to the wheel to make it spin. This iron wheel had a large gear around the rim of the wheel and a small gear on the shaft going into the mill building. I never saw it run, yet.
Jim Rogers
Well! I think we might have a match. South Boston is Halifax County. I'm pretty sure this is the gentleman and grandson who are from the family that donated the equipment for that building... I'm really regretting not getting contact info now. We were just 2 guys having a conversation at the fair. After he left my gears started turning.
(https://forestryforum.com/gallery/albums/userpics/10017/fair2.jpg?easyrotate_cache=1691866896)
Some friends stopped by as I was breaking down a few minutes ago and asked how I did. I said "I'm empty". "You sold everything?" "Weell, I know about half the people here and met some new friends". Needless to say this man went home with a bag of fresh cornmeal on the house.
(https://forestryforum.com/gallery/albums/userpics/55256/IMG_0754.jpg?easyrotate_cache=1692119147)
This is the shelf made from the
Red Cedar I sawed the other day. His great uncle planted the tree and his son will install it in a bar.
Some more of that Turpentine decking as it came off the 4sider last week. It gets the silvery colour in pictures because it's so fine grained it seems to reflect the light, but it'll go red/brown under a finish.
(https://forestryforum.com/gallery/albums/userpics/32746/1000001978.jpg?easyrotate_cache=1693124555)
(https://forestryforum.com/gallery/albums/userpics/32746/1000001990.jpg?easyrotate_cache=1693124632)
We ran 1000 linear, pretty much all of it showing a ribbon grain depending on the angle you look from. Be sawing the stuff for at least another year between framing orders, poor me
As I said to a guy... Straightness, squareness and finish quality I can take credit for, but colour and grain is above my pay grade.
Not really a customer project yet but I wanted to share some pics cuz it sure is something when you see it all dressed up
(https://forestryforum.com/gallery/albums/userpics/51041/IMG_6912.jpeg?easyrotate_cache=1692826244)
(https://forestryforum.com/gallery/albums/userpics/51041/71450953231__335D5CDE-883D-4E84-AB5C-1B297AB4C4EE.jpeg?easyrotate_cache=1692826245)
he wanted it all. wife doing a live edge bar top with epoxy between the individual boards.
Repeat customer of mine sent some pics of charcuterie boards he's made, mostly from lumber I've cut.
br>(https://forestryforum.com/gallery/albums/userpics/47685/IMG_0847.jpg?easyrotate_cache=1693160838)
(https://forestryforum.com/gallery/albums/userpics/47685/IMG_0842.jpg?easyrotate_cache=1693158732)
(https://forestryforum.com/gallery/albums/userpics/47685/IMG_0841.jpg?easyrotate_cache=1693160795)
You saw some very nice boards. :)
My next door neighbor came by my booth at the big three-day Flea market I sell at every year. I take a bunch of slabs to sell as Project pieces, and he looked through them. He told me if I don't sell the Cherry Slabs, he'll give me my asking price.
I had added two "Next to the Pith" slabs of Cherry to these. As previously mentioned in these threads, smaller logs only get sawn using four total cuts. I saw the pith slab and the two slabs sandwiching the pith. In this case, I used the pith slab for my own River Project.
He bought them in May, and I saw them and some of his other stuff today. Wow.
The last two pics are the Charcuterie Boards he made with the Cherry Slabs (the middle one...). The rest are wood he procures elsewhere. Please zoom in to view the Coasters he makes using Petoskey Stone inserts, shaped like the Great State of Michigan.
(https://forestryforum.com/gallery/albums/userpics/47942/IMG_3605.JPG?easyrotate_cache=1693335796)
(https://forestryforum.com/gallery/albums/userpics/47942/IMG_3602.JPG?easyrotate_cache=1693335794)
(https://forestryforum.com/gallery/albums/userpics/47942/IMG_3606.JPG?easyrotate_cache=1693335800)
(https://forestryforum.com/gallery/albums/userpics/47942/IMG_3608.JPG?easyrotate_cache=1693335802)
Don is a retired Forester and some of the other stuff he's done is stunning.
I have a couple other Cherry logs that will soon be going on the mill, and asked him to come over and lend his opinion on a strategy for milling these....
I get lots of pictures from customers with some really cool stuff but today I got a picture of a simple table top that I thought was exceptional. Had to share it with you guys.
(https://forestryforum.com/gallery/albums/userpics/10125/IMG_3048.jpg?easyrotate_cache=1695345763)
Made by a young couple that have just started woodworking. They normally bring me a yard tree log or two to saw and than dry in their solar kiln. Make nice charcuterie boards or similar type stuff. They didn't have a big enough jointer or planer to surface these boards so they brought them back to me a couple months ago. I didn't really think much about it when I processed them.
Finish is Rubio Monocoat. Extra points if ya can tell me the species of wood.
ummm.... Damson Plum?? Only thing that grows around here that looks like that.
Not from around here huh :D
Okay. I give up. Whatever it is it's very nice.
Elm?
Looks like plywood :)
Sasafrass?
Quote from: Crusarius on September 22, 2023, 10:15:12 AM
Looks like plywood :)
Thats what I was thinking too....but what kind of plywood? ;D
the over priced pine stuff from the box stores :) SO I think that is called unobtanium pine?
Plywood out of the plywood tree I'm sure.
No its elm, and I even see things in the grain. Frogman top center. :D
(https://forestryforum.com/gallery/albums/userpics/47685/Resized_20231213_105753.jpeg?easyrotate_cache=1703436894)
The wife of one of my customer's is a teacher, and asked for some 1x4's for a project. I ran a few white pine boards I had handy through the planer to smooth them out, and her students decorated them as snowmen for the holidays. :snowman:
A customer just sent me this picture of a Mustache Bench:
(https://forestryforum.com/gallery/albums/userpics/20011/IMG_4998.JPG?easyrotate_cache=1703694799)
That was built from some Longleaf Pine slabs.
Lil's cousin had been to the US on a cruise and bought back some cool cast coat hooks, and wanted to make a make a gift for her Brother. Did I have a nice board they could make it with? Had a dig in the shed and found a piece of Port Orford Cedar that should do the job. She got a friend to plane and engrave it, turned out pretty sweet. Will have the deer style hooks mounted on it, and it can go up in his man cave.
I owed him a favour as he had hooked me up with some Tasmanian Blackwood (Acacia) logs, so I was happy to supply the board.
(https://forestryforum.com/gallery/albums/userpics/10460/Wayne.jpg?easyrotate_cache=1703832043)
I have done stuff like that very similar. One of my favorites was my my parents christmas present.
It was a family tree using birds and branches to symbolize the family. Turned out really nice.
While at a NYE Celebration at our Arts Council, I saw some of my customers' work.
The cherry bowls are my son's work.
All from materials I cut.
(https://forestryforum.com/gallery/albums/userpics/48503/IMG_2273.jpeg?easyrotate_cache=1704076276)
(https://forestryforum.com/gallery/albums/userpics/48503/IMG_2271.jpeg?easyrotate_cache=1704076294)
(https://forestryforum.com/gallery/albums/userpics/48503/IMG_2272.jpeg?easyrotate_cache=1704076308)
(https://forestryforum.com/gallery/albums/userpics/48503/IMG_2276.jpeg?easyrotate_cache=1704076324)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20240116_201541.jpg?easyrotate_cache=1705402356)
Before, or at least early in the process.
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20240116_200037.jpg?easyrotate_cache=1705402356)
(https://forestryforum.com/gallery/albums/userpics/32746/IMG_20240116_200021.jpg?easyrotate_cache=1705402360)
After, or at least very close to finished.
Needless to say the customer is happy.
And I can see why!!!
Really cool! :)
I have a neighbor that's a teacher. Advanced math and shop, he called me asked if I had any Ash and that a young lady requested some for a shop project. Sure no problem, I have given him materials for a few kid projects. I didn't think much of it and went about finishing my snow moving project. Then he texted me the rest of the story.
She had just gotten back to school after a family tragedy. I know the family and the rest of the story. He told me she wanted especially to be in shop class because she want to make a cremation urn for her twin brother they just lost. I found the nice piece of walnut and added it to the stack and told my neighbor to have her make a cutting board for her mother for Mother's Day. I am blessed and thankful for my life and family, I know it can get upended in an instant.