iDRY Vacuum Kilns

Sponsors:

I did it the 670 works now.

Started by oldsaw-addict, January 22, 2004, 05:45:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

oldsaw-addict

I have just had another major victory on the road to the ultimate win. I have succeeded in getting the 670 Champ to run idle and cut, thanks to all of you guys giving me some help and ideas to fix it, It turns out that all I had to do was rebuild the carb, replace the fuel filter and tune the engine to my specs. And for everyone that gave me assistance, THANK YOU!!!!!!!!! I'll possibly be getting more saws that I know little to nothing about so I may or may not need your help again soon.  :) :)  Time to get back to my saw collection, I think I hear my pro mac crying. :D actually I need a new carb in the PM610 now for some reason, partly due to me doing work that I was much too tired to be doing and partially due to the screw being so stripped out. >:(
Let there be saws for all mankind!

Thank You Sponsors!