iDRY Vacuum Kilns

Sponsors:

Husky Mdl 235 & 575XP

Started by gabbby, October 06, 2011, 09:49:36 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

gabbby

October 06, 2011, 09:49:36 AM
Both oilers work very slow. i.e. Use a full tank of gas, only use 1/3 of
the bar oil. What is the adjustment??? A pic might help?
Thank you

nmurph

#1
October 06, 2011, 12:52:36 PM
The owner's manuals are available at Husqvarna.com

gabbby

#2
October 06, 2011, 01:44:13 PM
nmurph
Tks I found a 44 pg Manual  but it doesn't address adjusting the oiling mechanism.

mad murdock

#3
October 10, 2011, 03:29:32 PM
On my 372XP if you take the bar side cover off, and turn the saw upside-down, the adjuster is on that side near the bottom, easier to see from the upside-down view.  Turn it clockwise, I have mine turned all the way in, as I do a lot of milling with my saw.  The 575 should be similar to the 372XP but I don't know for sure.
Turbosawmill M6 (now M8) Warrior Ultra liteweight, Granberg Alaskan III, lots of saws-gas powered and human powered :D
Print
Go Up Pages1
User actions

Thank You Sponsors!