iDRY Vacuum Kilns

Sponsors:

License Plates For LT28

Started by AlpineCutter, October 31, 2017, 07:40:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Stephen1

Every state and province is different. Mine is a piece of dedicated equipment. Ontario's description is if the machine is lifted off the axle or base is it a Trailer capable of carrying another piece of equipment. A WM is dedicated frame. A generator on a trailer is not dedicated, anything can go on that frame. 
IDRY Vacum Kiln, LT40HDWide, BMS250 sharpener/setter 742b Bobcat, TCM forklift, Sthil 026,038, 461. 1952 TEA Fergusan Tractor

NaySawyer

WM Canada told me Ontario was the only province that did not require a plate, l also confirmed with Service Ontario.
The issue with wood splitters is none of the retail units l have seen have axles rated for more than 50 kph

Ventryjr

Might be a cheaper route.  I register my equipment trailers in Maine thru an online service and they mail me Maine plates and registration.  Somewhere in the area of $15/year for a 10 year plate.   I'm in NY where it would be ~$250-$300\year. 
-2x belsaw m14s and a Lane circle mill.

Thank You Sponsors!