iDRY Vacuum Kilns

Sponsors:

How replace spark plug

Started by Fulcrum156, November 25, 2017, 12:31:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Fulcrum156

November 25, 2017, 12:31:24 PM
Hi,

I was asking myself, how is it to replace the spark plug on this chainsaw (see image):
https://forestryforum.com/gallery/albums/userpics/47221/alp-0.jpg
https://forestryforum.com/gallery/albums/userpics/47221/alp-3.jpg

Will I need to remove five bolts in order to just replace the spark plug (don't get disturbed by the fact that currently the spark plug is not present)? The chainsaw is 30+ yrs old
Better to understand a little than to misunderstand a lot.

Woodcutter_Mo

#1
November 25, 2017, 02:25:14 PM
 What saw is it? Your image isn't showing up yet.
-WoodMizer LT25
-592XP full wrap, 372XP, 550XP, 455 Rancher, RedMax GZ3500T
-Fixer-uppers/projects:
024AV, MS260, MS361, MS460, Shindaiwa 488, 394XPG

Fulcrum156

#2
November 25, 2017, 03:12:21 PM
I think i managed to make images visible.
Better to understand a little than to misunderstand a lot.

johnny newburgh

#3
November 25, 2017, 06:45:33 PM
It was hard to see plug wire but I am guessing it is in rear behind cage? Try removing the bolts you where showing should not be a big deal. Also you can service anything in area when it is off and will get you familiar with saw.

Fulcrum156

#4
November 30, 2017, 01:41:05 AM
All done. Only two bolts was needed to access the spark plug.
Better to understand a little than to misunderstand a lot.

Woodcutter_Mo

#5
November 30, 2017, 12:13:06 PM
 Glad to see you got the plug replaced.  :)
-WoodMizer LT25
-592XP full wrap, 372XP, 550XP, 455 Rancher, RedMax GZ3500T
-Fixer-uppers/projects:
024AV, MS260, MS361, MS460, Shindaiwa 488, 394XPG
Print
Go Up Pages1
User actions

Thank You Sponsors!