iDRY Vacuum Kilns

Sponsors:

Timber Framing Hand Tools for Sale

Started by Jim_Rogers, May 03, 2011, 01:04:45 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Jim_Rogers

I have read, understand, and agree to the terms of posting an ad on the Forestry Forum.

Timber Framing Hand Tools for Sale
(Updated 2/26/2024-PM-116,184) Here is a list of tools currently available for sale.

We can take credit card payments over the phone. For phone number send an email.

These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

Tools for sale

Slicks

3 1/2" no name---$200-5C (with sheath)
3 1/2" JM Sheffield $250-5D
3" IF White-$235-5E

Corner Chisels

sold out

Framing Chisels

3/4"---Paring chisel -new handle & ring--$60-7Q**+ (not restored)
9/16" Mix-firmer chisel--------------------------$60-19E-13
3/8" Mix-firmer chisel---------------------------$55-19F-14
1" PS&W firmer-------------------------------------$90-25T-3
2" Page Whitman-----------------------------------$110-24W-2
2" George Parr--------------------------------------$130-26G-2
1 7/8" Jennings-------------------------------------$110-26H-1
2" PS&W---------------------------------------------$115-26J-3
2" Stiletto "Bell system"----------------------------$125-26N-7
2" Deaney & Wood----------------------------------$130-26O-8
2" Underhill------------------------------------------$95-26Q-10
1 1/4" unreadable-firmer---------------------------$55-26R-11

We also sell new leather sheaths/tip protectors for the above
chisels and slicks.

Here is a list of Sheaths currently available for sale.

Sheathes/Tip protectors Price List 3-8-2023

Plain Leather #102.5............. sold out
Plain Leather #104................ $22

I hope you will take advantage of this offer; these are nice leather sheaths.
If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know. I have created an album and photos are there of all the sheaths. Here is a link to the album in my gallery:
Click here for link the Sheaths photo Gallery

Larger shots have been taken of each and they are available to be emailed to you.
All prices do not include shipping costs. Shipping is $9.45 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.

Draw Knives

10" Marples-$95 ID # 23A
8" Jennings-$85 ID # 23B
9 1/2" Stuba-$65 ID # 23C

Boring Machines

All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

Miller Falls---$1125-S-14
Swan adjustable--$300-T-14

Boring Machine Bits

All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

5/8" Bit (Snell)---------37S-4-$30
1 3/4" Bit-fine thread----42U-3-$45
15/16" Bit---------------42Z-1-$40
1 3/16" Bit--------------43A-2-$30
1 3/4" Bit----------------43X-2-$40
1 1/4" Bit------------------46R-3-$20
13/16" owl bit-------------49C-4-$52
13/16" owl bit-------------49D-5-$52
13/16" owl bit-------------49E-6-$52
1 7/8" bit-------------------51A-13-$35
1 7/8" Bit-------------------51J-4-$30
1 1/4" bit-------------------51X-5-$35
1 3/8" Bit--------------------52G-2-$40
1 1/4" Bit-------------------52H-3-$40
7/8" bit---------------------52L-7-$40
1 1/4" bit------------------52R-3-$35
3/4" owl bit---------------52Z-11-$50
3/4" owl bit---------------53A-12-$50
3/4" owl bit---------------53B-13-$50
1 1/2"owl bit-------------53L-9-$67
1" bit--54A-1-$35
2" bit--54C-3-$45
2" bit--54D-4-$40
1 1/2" ultra smooth owl bit-$80-54F-2
1 1/2" ultra smooth owl bit-$80-54G-3
1 1/2" ultra smooth owl bit-$80-54i-5
1 1/2" ultra smooth owl bit-$80-54J-6
1 1/2" ultra smooth owl bit-$80-54K-7
1 1/2" ultra smooth owl bit-$80-54L-8
1 1/2" ultra smooth owl bit-$80-54M-9
1" ultra smooth owl bit-$55-54N-10
1" ultra smooth owl bit-$55-54O-11
1" ultra smooth owl bit-$55-54P-12
1" ultra smooth owl bit-$55-54Q-13
1" ultra smooth owl bit-$55-54S-15
1" ultra smooth owl bit-$55-54T-16
1" ultra smooth owl bit-$55-54U-17
1" ultra smooth owl bit-$55-54V-18
1" ultra smooth owl bit-$55-54W-19
2" bit---------------------$40-54Y-21
2" bit-fine thread--------$50-54Z-22

Misc.

Spoke shaves, other planes and other tools:
Borneman layout template (Big AL)-$152-M160*(on hand)
Borneman layout template (Big AL-DELUXE)-$192-M160-D**(on hand)
Miller Falls depth stop---------------------(sold out)
Swan/Snell boring machine dept stop------sold out
Yellowstone stropping compound-----------$20-M301
Tenon checker--------------------------------sold out
Peg hole mirror-------------------------------sold out
Test pin---------------------------------------sold out
Strops-(2"X8")---------------------------------$15-M607
Strops-(2x11")---------------------------------$20-M608
Spoke shave -----------------------------------$56-M658**

Bit and Brace Bits:

7/16" Shell Auger-$10-6G
11/16" Ships Auger-$15-5J
11/16" Shell Auger-$15-5L
5/8" Spur auger bit for brace-NEW--------------------$8-26R**
15/16" Spur auger bit brace bit-----------------------$8-34E-3**
11/16" Spur auger bit brace bit-----------------------$8-34F-4**
15/16" Spur auger bit brace bit-----------------------$15-37U-1**
5/8" Spur auger bit brace bit--------------------------$18-37Z-5**
7/8" Spur auger bit brace bit--------------------------$11-38N-1**
3/4" Spur auger bit brace bit-NEW--------------------$18-48D-6**


I hope you will take advantage of this offer; these are nice tools.
If you would like a photo of a tool, and your email program will accept pictures, I can send you one, just let me know. I have created an album and some of the tools have photos there. Here is a link to the album in my gallery:
Click here for link. Larger shots have been taken of each tool and they are available to be emailed to you.
All prices do not include shipping costs.

Jim Rogers
Jim's Tools

The id letter/number system after each tool price is my personal system to keep track of which item is which.
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

CX3

Jim I need a curved handle for my broad axe.  Do you have any of these?
John 3:16
You Better Believe It!

Jim_Rogers

Quote from: CX3 on May 13, 2011, 05:13:28 PM
Jim I need a curved handle for my broad axe.  Do you have any of these?


Currently sold out of those, sorry.
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

CX3

Ok.  I hate to ask this but where might I buy one?
John 3:16
You Better Believe It!

Jim_Rogers

I'll have to ask my partner in the tool business, if he intends to get some more from his supplier.
He purchases all the tools, including the handles.
So I don't know where he gets them.

I believe he is still away from home, at his site where he is building his retirement timber frame home.
When he gets back, I'll ask him.

Jim
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

CX3

John 3:16
You Better Believe It!

Jim_Rogers

Quote from: CX3 on May 14, 2011, 11:47:31 PM
Ok.  I hate to ask this but where might I buy one?

Last time he was here I asked him what was up with the handle supplier, and he told me that he didn't have any more, or wasn't making any more. And we haven't found a replacement handle maker, as yet.
Sorry for such a late response to your question. I though I had posted a reply a while ago.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Reggie

I am interested in the item #'s M187B and M187C. I am new to some of this and want to make sure I can do what I want to do with these. My thinking is to use them to bore 1 1/2" and 2" holes in timbers (for morticing) to construct a small timber frame shed. Would these suffice for that? Do you have bits that would work with these handles? WHat range of bits both in shank style and bit size will each of these handle? Any other information would be great to have. Regarding some of the other T handles with no bits in them do you have bit(s) for them at all? Again I am green so anything you can tell me would be helpful.

Thanks,
Reggie Ogg (new member)

Reggie

On another note - Do you still have the corner chisels left? I can not seem to locate the pi for them - Am I missing them some how?
Thanks,
Reggie

Jim_Rogers

Reggie:

The pictures of the corner chisels are in my gallery.
Here is one link:
https://forestryforum.com/gallery/displayimage.php?album=283&pos=92

Here is another:
https://forestryforum.com/gallery/displayimage.php?album=283&pos=49

Here is the last one. Somehow it was not posted or it had been removed previously.
https://forestryforum.com/gallery/displayimage.php?album=283&pos=0

You are correct that these T- handles can be used with bits for boring out mortises.
We do have some bits on hand with the ends that are shaped to fit into these handles and make it so that you can twist the handle to bore a hole.
I'll have to check the list and or box and see what sizes with the proper ends for the handles we have left, and get back to you tomorrow.

In the mean time can you send me an email via the regular email system so that I can send you more information about the procedures for purchasing out tools?

Thanks for your interest in our tools.
Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Jim_Rogers

I just posted a video of the Millers Falls machine that was on the list.
This machine has been sold, but I wanted you to see the video so that you'd know or could see what a nice Millers Falls boring machine looks like and how it works.


http://www.youtube.com/watch?v=HGdwrlsOU2o&feature=player_profilepage
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Brad_bb

What that dry white oak Jim? 

Jim is correct in that, this situation is the toughest.  You want to have a sharp bit (you will learn to sharpen them and keep them sharp), and keep your momentum going.  Stopping and starting is more difficult though not always unavoidable.  Soft woods and green wood will be easier of course.
Anything someone can design, I can sure figure out how to fix!
If I say it\\\\\\\'s going to take so long, multiply that by at least 3!

Jim_Rogers

Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

CX3

Hey Jim, I got my broad axe handle!  Just like ordered.  Thanks.
John 3:16
You Better Believe It!

Jim_Rogers

Thanks I'm glad your happy.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

JD840

Hi,  interested in a real nice vintage mortice drill.   Need to bore 2x10 inch holes.   Also looking for 2" bits, corner chisel, dog nose hammer and broad chisel.  Looks like you have a great selection of items.  Any chance you can send me some pics of the above mentioned items.  Thanks.

Jim_Rogers

Quote from: JD840 on November 12, 2012, 10:07:26 AM
Hi,  interested in a real nice vintage mortice drill.   Need to bore 2x10 inch holes.   Also looking for 2" bits, corner chisel, dog nose hammer and broad chisel.  Looks like you have a great selection of items.  Any chance you can send me some pics of the above mentioned items.  Thanks.

JD8480:
Some of the tools have been photographed and are in my gallery. You can access them via the link provided in the list.
Also, you'll need to send me an email via the regular email system so I can email you some pictures and other information about the process of buying tools from us.
Please send to jrsawmill (at) verizon (dot) net

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

JB Griffin

Jim I know its off topic, but do you know anything about old Keen Kutter broad axes I picked one up and its cast steel
and marked Keen        In raised letters. ???
                   Kutter
2000 LT40hyd remote 33hp Kubota with 6gpm hyd unit, 150 Prentice, WM bms250, Suffolk dual tooth setter

Over 3.5million bdft sawn with a Baker Dominator.

JB Griffin

After doing a little reserch online I found that its most likely a repo knockoff. I prob. picked it up at the scrapyard for 25cents a pound so didn't lose much, oh well.
Thanks
2000 LT40hyd remote 33hp Kubota with 6gpm hyd unit, 150 Prentice, WM bms250, Suffolk dual tooth setter

Over 3.5million bdft sawn with a Baker Dominator.

Jim_Rogers

I'll have to ask a friend about that.
I'm not sure if that one is ok or only a decoration piece.

Jim Rogers
PS. I'll post when I have an answer.
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

JB Griffin

Thanks Jim, the more I look at it the more it looks like junk. The eye has squared corners and the poll side of the eye is flat not round like they ought to be. Thanks again.
2000 LT40hyd remote 33hp Kubota with 6gpm hyd unit, 150 Prentice, WM bms250, Suffolk dual tooth setter

Over 3.5million bdft sawn with a Baker Dominator.

Jim_Rogers

Cast steel is ok in an axe. Cast iron is not.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

JB Griffin

10-4 Jim cast iron is no good for anything that recives much impact, cast steel on the other hand ain't terrible but I perfer forged(hand forged) being a bladesmith. :D
The way its rusted makes me very suspect that is cast iron and not steel at all.
2000 LT40hyd remote 33hp Kubota with 6gpm hyd unit, 150 Prentice, WM bms250, Suffolk dual tooth setter

Over 3.5million bdft sawn with a Baker Dominator.

dukndog

Jim,

Thanks for the auger bits. All are in great shape and sharp. Tell Tom thanks as well!!

Rich Miller
WM LT-15G25 w/PwrFeed, Mahindra 3510, Husky 385xp, Stihl MS261 and a wife who supports my hobby!!

rickvanrv

How do I go about ordering the Basket weave #106HBW2.5 sheath?

Thank You Sponsors!