needed: milling chainsaw

[HolmenTree]

I have milled with LoPro Picco 3/8 chain with my Stihl 066 Mag. But the chain "kinked up" in the links pretty quick. Trouble was I was running standard 3/8 rim and bar nose.
I know by comparing a 3/8 picco rim sprocket and standard 3/8 rim the pitch is different. [8T-3/8 picco rim is larger in diameter then a standard 8T 3/8 rim]. I have a 8T 3/8 Picco in small spline bore to fit small Stihls.
I'm told Logosol which I have no experience with has a rim sprocket in Picco pitch with the large standard 7 spline bore to fit the 066 etc. The kinking problem should be eliminated with this rim.
Don't forgot to run a picco bar nose too,or use a roller nose if that's not possible.