iDRY Vacuum Kilns

Sponsors:

Office views

Started by Ken, August 22, 2014, 07:09:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

chep

Cant 1 up johndozer but still beautiful 
near whitefield nh 
 

 

Satamax

My summer office. 

;D

 

 

 
French CD4 sawmill. Latil TL 73. Self moving hydraulic crane. Iveco daily 4x4 lwb dead as of 06/2020. Replaced by a Brimont TL80 CSA.

Ken

Spent the last couple of weeks with a nice view of the Nashwaak River valley.  The forwarder sure had to work hard bringing the wood up over the hill.

 
Lots of toys for working in the bush

Old Greenhorn

Looks like you guys are doing it right, or at least better than me. This has been my office view for the last weeks whebn I have been making money.


 
Tom Lindtveit, Woodsman Forest Products
Oscar 328 Band Mill, Husky 350, 450, 562, & 372 (Clone), Mule 3010, and too many hand tools. :) Retired and trying to make a living to stay that way. NYLT Certified.
OK, maybe I'm the woodcutter now.
I work with wood, There is a rumor I might be a woodworker.

Tacotodd

Quote from: Old Greenhorn on September 12, 2021, 06:47:12 PM
Looks like you guys are doing it right, or at least better than me. This has been my office view for the last weeks whebn I have been making money.



Tom, without the money there's no office ;D
Trying harder everyday.

Firewoodjoe

This actually went from property line to property line on my job. Nice view over money on the bank. 


Tacotodd

A rainbow DOES lead to a pot-o-gold (of sorts)  8)
Trying harder everyday.

Walnut Beast

#Thank the Lord the beauty of the land

 

 

GRANITEstateMP

Got done my real job, then it was time to help the wifes family chop some corn. Got to keep them cows in good feed!



 
Hakki Pilke 1x37
Kubota M6040
Load Trail 12ft Dump Trailer
2015 GMC 3500HD SRW
2016 Polaris 450HO
2016 Polaris 570
SureTrac 12ft Dump Trailer

newoodguy78

Chopping directly into the truck,or running a dump wagon?

newoodguy78

 

 


 Putting in cover crops last night 

Walnut Beast

In a patriotic way 👍

GRANITEstateMP

Quote from: newoodguy78 on September 16, 2021, 08:53:58 PM
Chopping directly into the truck,or running a dump wagon?
Yes ;D
On ole Yellah, we chop right into the truck, the box is only 9ish ft long.  We have a Richardton dump wagon behind a NH240 2 row chopper.  Things have been wet so most of the time we tip once into the C60 or C65? a long wheelbase 6 wheeler, or tip twice into the Autocar rolloff truck. If we ever find a dry field, it's tip once, then top it off til the corn tickles the telephone wires on the dirt road! :D
Hakki Pilke 1x37
Kubota M6040
Load Trail 12ft Dump Trailer
2015 GMC 3500HD SRW
2016 Polaris 450HO
2016 Polaris 570
SureTrac 12ft Dump Trailer

mike_belben

I had my fingers crossed yall were redneck enough to chop directly into an IH schoolbus.  I know that hoodscoop pretty well.
Praise The Lord

GRANITEstateMP

Mike, if you could make a school bus dump cheap enough, we sure would!  The hood scoop is where the raw power comes from :D
Hakki Pilke 1x37
Kubota M6040
Load Trail 12ft Dump Trailer
2015 GMC 3500HD SRW
2016 Polaris 450HO
2016 Polaris 570
SureTrac 12ft Dump Trailer

mike_belben

put in a roof hatch for the intake pipe.  toss the seats, build a plywood floor vee just below the beltline and run a walking floor out the back door. 
Praise The Lord

GRANITEstateMP

Mike, that bus may be even longer than our chopper!


 
this was today's office view. Small field, lots of turning, had a bunch of corn lost to raccoons.  Someone left a giant maple (I think) along the old stone wall to give me a bit of shade while he filled the wagon
Hakki Pilke 1x37
Kubota M6040
Load Trail 12ft Dump Trailer
2015 GMC 3500HD SRW
2016 Polaris 450HO
2016 Polaris 570
SureTrac 12ft Dump Trailer

johndozer

Last weeks office. Getting a bit of snow now.

 

SwampDonkey

View from my studio window, from the crow's nest. 8)



"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

barbender

Johndozer, where are you located?
Too many irons in the fire

Satamax

Quote from: johndozer on October 07, 2021, 02:12:20 PM
Last weeks office. Getting a bit of snow now.


I'm keen! 
French CD4 sawmill. Latil TL 73. Self moving hydraulic crane. Iveco daily 4x4 lwb dead as of 06/2020. Replaced by a Brimont TL80 CSA.

Satamax

Quote from: SwampDonkey on October 07, 2021, 02:18:10 PM
View from my studio window, from the crow's nest. 8)




I like dat one too! :D 
French CD4 sawmill. Latil TL 73. Self moving hydraulic crane. Iveco daily 4x4 lwb dead as of 06/2020. Replaced by a Brimont TL80 CSA.

SwampDonkey

Quote from: barbender on October 07, 2021, 02:29:16 PM
Johndozer, where are you located?
Looks like Smithers, BC area. Just a guess. ;)

I'll be glad when the snow comes. :D :D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

trimguy

This has been my view the last week.

 

 

Nebraska

 

 

Not my office view but a few miles East of my branch office. ;) Barbender has seen this view. I was a few minutes late on a really nice sunset. Missouri River in the background.

Thank You Sponsors!