iDRY Vacuum Kilns

Sponsors:

L53 chamber options

Started by j_d, November 23, 2019, 03:52:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

j_d

After a bunch of life ridiculousness 2020 is my year to get back into portable sawing and I bought the components for a small HD kiln from Nyle.  

I am looking for a chamber that can be moved at a later date.  I want something like a 20' connex refer unit to modify but havent been able to locate one.  I can build but that will be a last resort.  I also checked out Nyle's prefab chamber but at $16,000 not including a slab it's not in the budget.  

Any suggestions are greatly appreciated!

Josh
God, Family, Tribe

busenitzcww

I'm going 21'x9' stick built and making it portable, but I have a wheel loader with 8' wide and long forks ;D

K-Guy


@j_d 

Build the chamber as in the chamber plans supplied but use an insulated wood floor on skids.
Nyle Service Dept.
A common mistake people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
- D. Adams

Thank You Sponsors!