Author Topic: Firewood holder (Read 2471 times)

marine5068 · « **on:** June 21, 2015, 07:51:10 AM »

I liked this guys project for a firewood limb holder for easier cutting.
Great ideas and uses.

DeerMeadowFarm · « **Reply #1 on:** June 23, 2015, 09:00:28 AM »

I have one of those that I bought. Now that I have the cordwood saw for limbs, I don't think I'll ever use it again.

wfcjr · « **Reply #2 on:** July 06, 2015, 08:33:27 PM »

Sawbuck... best invention since bottled beer.

We cut logs to 9' lengths.
Have a 6' long sawbuck divided into 18" compartments.

Place the log in the sawbuck with roughly equal overhang on each end.
Saw in place and voila, 6 each 18" fire logs.

Sawbucks are very handy and are a good safety option. No pinching, no kickback, log is
well supported with equal weight.

Have a smaller one with 14" compartments for the smaller stove in the kitchen as well.
Great tools.

clww · « **Reply #3 on:** July 06, 2015, 08:36:32 PM »

The posts on YouTube by "Wranglestar" are always useful. I've been a subscriber to that channel on there for a few years now.

Geeg · « **Reply #4 on:** July 23, 2015, 06:00:26 AM »

I saw this on youtube once and decided to make my own. I drew it up on sketchup and I printed out the pieces to be cut but have yet time to build it. You throw this in a standard trailer hitch and it holds the end of the log off the ground so you can cut it up. I designed this one to be able to receive up to an 8" diameter log

I have attached the sketchup drawing if anyone wants to make their own.
Cheers, Geeg

Oliver1655 · « **Reply #5 on:** July 23, 2015, 10:20:15 PM »

I made a chainsaw holder which clamps to the side of a trailer & has an piece of chain which hangs down to make a length gauge which is adjustable. Just start the saw then lower the limbs down onto the chainsaw. The rounds land on the trailer. Faster for me than having to load the limbs onto a jig or saw buck then having to pick the pieces back up. There are videos on YOUTUBE with similar setups only they are on saw horses.

Geeg · « **Reply #6 on:** July 23, 2015, 11:18:16 PM »

Quote from: Oliver1655 on July 23, 2015, 10:20:15 PM

I made a chainsaw holder which clamps to the side of a trailer & has an piece of chain which hangs down to make a length gauge which is adjustable. Just start the saw then lower the limbs down onto the chainsaw. The rounds land on the trailer. Faster for me than having to load the limbs onto a jig or saw buck then having to pick the pieces back up. There are videos on YOUTUBE with similar setups only they are on saw horses.

Very ingenious!

barbender · « **Reply #7 on:** July 24, 2015, 12:39:11 AM »

I'd cut a hand with that set up for sure

Theo · « **Reply #8 on:** July 28, 2015, 07:41:10 AM »

on sale

http://www.baileysonline.com/shop.axd/ProductDetails?item_no=15730&src=WA0715&utm_source=jul7_2015_wa&utm_medium=email&utm_term=SmartHolder&utm_campaign=jul7_2015_wa_email&trk_msg=GFBTKGNUO7VKFAT214CT34AQF4&trk_contact=K1DKBDA4CCKK6S83GU5TLPE600

Forestry Forum
Sponsored by: