iDRY Vacuum Kilns

Sponsors:

Anyone sharpen their own edger/debarker blades

Started by PAmizerman, September 05, 2019, 11:31:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

PAmizerman

Looking to see what my options are and if it would be cost effective to sharpen my own?
Woodmizer lt40 super remote 42hp Kubota diesel. Accuset II
Hydraulics everywhere
Woodmizer edger 26hp cat diesel
Traverse 6035 telehandler
Case 95xt skidloader
http://byrnemillwork.com/
WM bms250 sharpener
WM bmt250 setter
and a lot of back breaking work!!

Peter Drouin

I do touch up the debarker with an offset 4" grinder. It will cut the carbide just push hard on it. :D  I can leave it on the mill to do it. The edger I send out. He doses my chipper blades too.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

customsawyer

I have a company that comes by and picks up my edger blades and debarker blades. They sharpen or retip both. About $16.00 each.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

Thank You Sponsors!