iDRY Vacuum Kilns

Sponsors:

To the Timberjack gurus. Is this a PR75 Rockwell axle?

Started by Rooney43, April 12, 2021, 06:15:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Rooney43

Also I read on another topic the axle seal was 416865.   Thank

 

 

tacks Y

No guru here but.. They look the same as on my 225D and the spec sheet says PR76. Not sure the difference of 75 and 76. Width? What model TJ are these on?

Rooney43

1974 240D.  I saw a thread on axle seals. guy had a 230D. Looked exactly the same, PR75. Just wanted to make sure before I bought parts.

Rooney43

Then again aren't PR75 and 76 planetaries and axles the same? Just different housing.  Does that mean the seals are the same?

tacks Y

The spec sheet on the 230D shows PR75. I would think wider housing and longer axles compared to my PR 76 225D. But same seals and such. Did I say NO Guru here.

Tacotodd

In my world, it's going to be best to tear it down and look at it for #'s and then start the calls. Worst case, take to a TRUSTED place to check on availability. 

Just MY experience, but that's a whole nuther thing. Just sayin.
Trying harder everyday.

tacks Y


Thank You Sponsors!