iDRY Vacuum Kilns

Sponsors:

Old Husqvarna 266se very hard to pull

Started by craig345, May 21, 2018, 11:39:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Sprinter

Heard of a simple way to remove the flywheel. And it worked for me.
I loosened the nut first and with a center punch and hammer, give the
Shaft  center a sharp rap and off she comes. 
Can't remember where I heard this but it worked slick.

sablatnic

If the starter cord is too short or if the pulley has a crack those saws are almost impossible to start - and I have spent quite some time before I found the cracked pulley!

Thank You Sponsors!