iDRY Vacuum Kilns

Sponsors:

Blade Jumping in first 6" of Cut

Started by quadracutter222, January 23, 2019, 02:25:20 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

Cutting Edge

#25
January 31, 2019, 10:55:43 PM


.045" should do you fine.  Might have a little trouble in wide cuts, but w/ 25hp, wide will be a challenge regardless.


No, unless there is a relief machined on the front edge of the wheel to accommodate a narrower blade.  Might be worth having that done.  Savings in blade costs could easily pay for the machining. 


"Winning an argument isn't everything, as long as you are heard and understood" - W.S.


Cutting Edge Saw Service, LLC -
- Sharpening Services
- Portable/Custom Milling and Slabbing
- On-Site Sawmill Maintenance/Repair Services

Factory Direct Kasco WoodMaxx Blades
Ph- (304) 878-3343
Print
Go Up Pages 1 2 All
User actions

Thank You Sponsors!