The Forestry Forum
General Forestry => Sawmills and Milling => Topic started by: Piddler on February 08, 2018, 03:18:33 PM
Could someone tell me the diameter of the Cooks standard guide rollers (front and back) for the 1-1/4 blade . They give a 2" diameter but for what end . Needing these measurements so I can make the base for them to bolt to. Thanks in advance.
Cooks sells 2 2 1/2 and 3" diameter roller guides with flanges on the back, my TK runs 3" guides which I like better as they don't turn as fast, don't wear out as fast and should be a little easier on the blade but they cost more. The diameter they list is for the guide surface, the flange will be quite a bit bigger. Steve