After a couple of years of looking , researching and procrastinating I finally broke down and bought a mill. Those of you who might have read my other threads know I was looking hard at Woodland Mills and EZ Boardwalk Jr. I had myself convinced to order the EZ Boardwalk Jr and then this mill popped on Craigslist.
It's a December 2016 build Wood-Mizer LT28 with the manual log.deck package. I drove to Virginia yesterday to pick it up and bring it back to PA. I had a chance to try it out today on a Hemlock log. I'm hooked!
Now I have many questions about blades...the choices are much and I know so little lol I have three new blades the PO gave me and about 10 old blades he had sitting out and are a little rusty. I was think about trying Wood-Mizer's re-sharp service.
(https://forestryforum.com/gallery/albums/userpics/40430/35472601_10209861282128646_4355006712550260736_n.jpg?easyrotate_cache=1529282391)
(https://forestryforum.com/gallery/albums/userpics/40430/New_LT28.jpg?easyrotate_cache=1529282391)
Congratulations on the new mill purchase.
I use the WM re-sharp program for all my blades and have been well pleased with the quality and response times. I use their auto-replace/auto-refill to get replacements automatically for blades that can't be resharpened. Get them at a discount rate so always have the same number of blades in rotation.
That's what I liked about the service, I would always have blades in rotation. Is there any way to identify what type of blades I have? Is there anything stamped on them?
You will like it. Now order a Logrite cantdog or peavey.
Quote from: thecfarm on June 17, 2018, 09:24:29 PM
You will like it. Now order a Logrite cantdog or peavey.
The PO gave me a 48" Log-Rite cant hook 8)
Their are three ways to identify your bands, the first one is to look at each one and record the serial number off of them, call Indy and they can tell you what you have in your hand. The other way is to purchase one of WM's blade blade ID tools, basically it is 5 sided tool that has the inverse of blade profiles cut into it, you match up your teeth to the side that fits and look at which profile you have. The easiest method however is to call the PO and ask him what he ran.
Marty Parsons dealership will be the closest Re-Sharp location for you, those guys do a great job and you will be very happy with the bands you get back. If you have not touched base with Marty yet, make a point to do so, he is a great resource and awesome dealer.
Congratulations!
8) Hallelujah! Miracles do happen! Send in a report to Guinness, has to be near a record for waffle time ;D
Congrats on the mill! Now let the good times roll and the dust fly!! 8)
smiley_applauseWill be following your progress
Great purchase! You want regret it! I use Woodmizer Resharp in Albemarle, NC. Just send them in with a note in the box that says....what kind of blades are these?
Quote from: mad murdock on June 18, 2018, 12:45:28 AM
8) Hallelujah! Miracles do happen! Send in a report to Guinness, has to be near a record for waffle time ;D
Congrats on the mill! Now let the good times roll and the dust fly!! 8)
lol I didn't want to rush into anything lol Now someone on here was supposed to write a speech when I finally bought a mill...
Congratulations on getting the sawmill !!! :)
Send me a PM with your Name and Mailing Address and I will send you a box (10) of used but already resharpened 10° blades.
The only cost to you will be $15 shipping and a donation to the Forestry Forum with the amount being determined by you.
Congrats on the mill . Very good find on the LT35 . Wood-Mizer has a blade jig that fits to the teeth and will tell you what deg, you have . Its a roundish thing made of sheet metal . In time you will get good at visual I.D. You got a really good mill ! Happy sawing !
Nice rig congrats
Nice score! You're in it now👍👍
Congratulations on your purchase of a Wood-Mizer. Let the games begin!
That's a nice mill 8)
You will love the band saw mill, they are so fast!
Congratulations! Great find! Many happy years of sawing to you!
Quote from: Magicman on June 18, 2018, 08:03:40 AM
Congratulations on getting the sawmill !!! :)
Send me a PM with your Name and Mailing Address and I will send you a box (10) of used but already resharpened 10° blades.
I got a new mill too. ;D
Goat
47910 No Blade Way
Woodmizer, S.C. 29732
Congratulations on your new "to you" mill purchase!
Congrats! Bet you feel like a winner....(as written in my avatar, if you have time....). Happy sawing. All the best, Rob.
Quote from: Magicman on June 18, 2018, 08:03:40 AMSend me a PM with your Name and Mailing Address and I will send you a box (10) of used but already resharpened 10° blades.
The blades are boxed and ready for the UPS man Monday. I have been letting attrition gradually reduce/eliminate my supply of 10° blades and I thought that surely I had 10 left but there were only 8. Anyway, now I only have two different blade profiles to keep in inventory; 4° and T7°.