Print Page - learning curve

Title: learning curve
Post by: UkeeJ on February 07, 2019, 08:38:52 PM

Hi all,
Just thought I'd share some photos of a large fir log I've been working on. This is my first Alaskan milling project it's been interesting. I'm trying to get 16 beams approx. 12"x4"x40' long. between the king tides and rotten sections in the wood it's been a challenge but fun learning curve. I'm getting good at sharpening my chain.
The saw : brand new port / polished Husqvarna 3120 w 36" granberg mill

Title: Re: learning curve
Post by: UkeeJ on February 07, 2019, 08:43:38 PM

--Photos MUST be in the Forestry Forum gallery!!!!!--.com/user/pattersonja/media/milling_zpskg8gy3if.jpg.html][img width=640 --Photos MUST be in the Forestry Forum gallery!!!!!--.com/albums/uu315/pattersonja/milling_zpskg8gy3if.jpg[/img][/url]

Title: Re: learning curve
Post by: Ianab on February 08, 2019, 02:42:09 AM

Hi UkeeJ

Please have a read of this thread about posting pictures on the forum. We have our own picture hosting system, that assures the pictures added to posts stay intact even if other hosting services change their rules or shut down completely.

Updated Photo Posting Tutorial in Technical Support Topics (http://forestryforum.com/board/index.php?topic=100194.0)

We do want to see you pictures. :)

Title: Re: learning curve
Post by: thecfarm on February 08, 2019, 06:07:59 AM

UkeeJ,welcome to the forum. Pictures of wood we all like!!

Title: Re: learning curve
Post by: UkeeJ on February 08, 2019, 06:38:38 PM

(https://forestryforum.com/gallery/albums/userpics/52844/milling.jpg?easyrotate_cache=1549669079)

(https://forestryforum.com/gallery/albums/userpics/52844/cant_outline.jpg?easyrotate_cache=1549669079)

(https://forestryforum.com/gallery/albums/userpics/52844/beam_start.jpg?easyrotate_cache=1549669079)

Title: Re: learning curve
Post by: UkeeJ on February 08, 2019, 06:39:29 PM

Thanks gents I took a tour of the tutorial very well done.

Title: Re: learning curve
Post by: quadracutter222 on February 08, 2019, 06:50:11 PM

Can't quite see the grain, but looks like an old growth fir, nice score!!

Good call on the 3120 ;)

Title: Re: learning curve
Post by: UkeeJ on February 12, 2019, 10:01:53 PM

Thanks quad,
I purchased this 3120 brand new in October, had the shop I bought it from port/polish & change the exhaust. Think it's around 125cc now. Running a 42" Cannon bar.

We're rebuilding an approach for a dock, it's about 120' long with some of the largest spans being around 33'. Hope to get enough beams out of this Fir log but found some rot (and sand grrrr) had occurred around a couple of the knots. Beauty sections in it though.

Title: Re: learning curve
Post by: OffGrid973 on February 12, 2019, 11:12:43 PM

That could be the nicest looking job site I have seen on here, Sure those aren't palm trees your cutting up.

Great job with that saw, amazing what some real iron can produce on the Alaskan mills. How many hours did your first beam take you, as that came out great.

Title: Re: learning curve
Post by: UkeeJ on February 13, 2019, 06:20:10 PM

Thank you, I feel pretty fortunate to have that work site on sunny days when the tides are cooperating! To section out the log and do one 40' x 4' free hand cant I'm about 15 gallons of gas into it. Manipulating that log around was interesting, pretty new to all this so it was a caveman show for the most part ha ha. But the lumber has been first class with the exception of the punky spots ( and of course my wonky cuts.. ;D)

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: UkeeJ on February 07, 2019, 08:38:52 PM