The Forestry Forum
General Forestry => Sawmills and Milling => Topic started by: JMG on April 15, 2019, 06:39:19 PM
Can someone tell me where to order cam for cat claw sharpener to sharpen wood mixer blades?
Cook Saw doesn't advertise it but I bet they sell it.
If the tooth spacing is right, after about you sharpen it about 3 times it will be the shape of whatever cam you have. First time just hit the edge of the tooth, next time get a little more and by the third pass clean out the gullet. I started out with 3 cams that were 7/8 and one that was one inch. I don't plan on ever buying anymore no matter what bands I come by. Thats what works for me. Banjo
I bought a WM profile cam from Cooks, but it wasn't an exact match. I had to spend time grinding it to match. After that, I just hand ground Cooks cams to match all the WM profiles. It's pretty easy.
Thanks for the advice.ill scratch my head on this and then decide
check with 'cutting edge'.
Member cutting edge is a good choice. You can also get it from WM. It will fit the cooks sharpener just fine.