I have a timber king feller buncher with a hydro axe hot saw head on it. The disc is cracked about 3 in from the edge towards the center at every tooth. Can I just weld those cracks up ? Thanks
no , your disk is shot. That is where they crack
Replace it! If it comes apart you don't want to be anywhere near the vicinity.
I'm pretty sure once it cracks, you need to replace it. When those discs come apart, you could kill someone on the landing 1/4 mile away!
Yep time for a new disc.
Ok. Thanks guys
I have a hydro ax 470 blades been cracked welded it 5 years ago still going
Quote from: Bigtree1986 on December 11, 2022, 04:14:33 PM
I have a hydro ax 470 blades been cracked welded it 5 years ago still going
I'm sure your insurance underwriter has no problem with that.
Well when your stuffs paid off and only family me and my dad work and only do private sales no need for insurance
How much is your life worth?
I can understand if someone is out in woods while your cutting when cutter going slasher going so no slider out there to get hit plus if u did a shity job ya wouldn't trust it I know a lot of people that have done this you have the same chance of losing a tooth or a new blade breaking as a welded one
Although I have no experience with logging equipment, saws get welded all the time by saw 'filers'. Saws need to be inspected often for plate cracks and when found drilled at the very end [of crack]. Sometimes that is all that is needed but always inspect to make sure the crack is not walking. On a high speed cut off saw a crack will often scream as it vibrates. This is a warning. Any crack that can not be controlled means that saw is junk.
Yea you need a new disk. You can't take the disc off and set it on some jack stands and put a steel plate over the center. And you can't GRIND the cracks out completely for 100 percent weld , no torch cuts. And you can't put a fish cooker under the middle and heat the whole disc. And you can't weld it with mild steel mig or tig while hot. And you can't bury the hot disc in sand to cool to cool slowly. It just can't be done , don't even try it!