Print Page - Lt 40 super head drive bearing size.

Title: Lt 40 super head drive bearing size.
Post by: CCCLLC on October 05, 2020, 12:16:45 PM

Looking to have spare bearings on the shelf but don't want to order Peer thru wood Mizer. The bearings on the head drive sprockets say 6203 but the ones I have on the shelf now have a larger bore on ID. Is there another 6203 with smaller bore and any ideas on the one I need.

Title: Re: Lt 40 super head drive bearing size.
Post by: ladylake on October 05, 2020, 02:37:40 PM

I think the 6203 bearing come with 2 different id sizes, some thing like 6203 - 10 and 6203 -12. Just going from my poor memory so the last numbers might be different. Steve

Title: Re: Lt 40 super head drive bearing size.
Post by: CCCLLC on October 05, 2020, 03:42:35 PM

Thanks

Title: Re: Lt 40 super head drive bearing size.
Post by: Brian_Rhoad on October 05, 2020, 04:36:32 PM

I think the 6203-10 are 5/8" ID and the 6203-12 are 3/4" ID.

Title: Re: Lt 40 super head drive bearing size.
Post by: CCCLLC on October 08, 2020, 02:41:14 PM

Thanks for the input, found it helpful. Mine look to be 6203-10. Going to get 3 from WM to be sure for now. Hard to beat $5/ bearing from them.

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: CCCLLC on October 05, 2020, 12:16:45 PM