Print Page - Need a sawyer for a friend

Title: Need a sawyer for a friend
Post by: Raym on October 13, 2020, 08:00:42 AM

I have a friend who has relocated to the Rockingham NC area. They have purchased a property and are in the process of renovating it to be used as a resort of sorts for disabled children and their families. They have some large trees that need to be sawn so that the can make a large dining table. I have looked on the woodmizer site but did not see anything close. They are close to the intersection of rt 74 and rt 1.

Hopefully there is someone on this forum that is close. Please advise and I can send them your contact info.....Thanks Ray

Title: Re: Need a sawyer for a friend
Post by: Southside on October 13, 2020, 10:04:56 AM

@POSTON WIDEHEAD (https://forestryforum.com/board/index.php?action=profile;u=14625) is in Rock Hill, SC. Closest that comes to mind.

Title: Re: Need a sawyer for a friend
Post by: POSTON WIDEHEAD on October 13, 2020, 12:24:15 PM

I will be glad to help you.

But somebody correct me if I'm wrong but member SCOTT SMITH may be a whole lot closer than me.
Can't remember his nickname on here.

Title: Re: Need a sawyer for a friend
Post by: SawyerTed on October 13, 2020, 07:36:52 PM

@jeepcj779 (https://forestryforum.com/board/index.php?action=profile;u=46423) is in Dunn NC

Title: Re: Need a sawyer for a friend
Post by: trimguy on October 13, 2020, 08:43:41 PM

@scsmith42 (https://forestryforum.com/board/index.php?action=profile;u=3296)

Title: Re: Need a sawyer for a friend
Post by: scsmith42 on October 13, 2020, 09:43:39 PM

David / Trimguy - thanks for the referral.

Raym, I'm about an hour NE of Rockingham right up US1. We do custom milling and drying all the time, and can slab up to 72" wide.

Our local Website is Wpsawmill.com

Thx.

Scott

Title: Re: Need a sawyer for a friend
Post by: Raym on October 14, 2020, 04:03:05 AM

Quote from: scsmith42 on October 13, 2020, 09:43:39 PM
David / Trimguy - thanks for the referral.

Raym, I'm about an hour NE of Rockingham right up US1. We do custom milling and drying all the time, and can slab up to 72" wide.

Our local Website is Wpsawmill.com

Thx.

Scott

Thanks. I will Pass along your contact info. These are awesome folks so if nothing else you may gain some great friends.

Title: Re: Need a sawyer for a friend
Post by: scsmith42 on October 14, 2020, 08:43:48 AM

Quote from: Raym on October 14, 2020, 04:03:05 AM
Quote from: scsmith42 on October 13, 2020, 09:43:39 PM
David / Trimguy - thanks for the referral.

Raym, I'm about an hour NE of Rockingham right up US1. We do custom milling and drying all the time, and can slab up to 72" wide.

Our local Website is Wpsawmill.com

Thx.

Scott
Thanks. I will Pass along your contact info. These are awesome folks so if nothing else you may gain some great friends.

Great! I'm always up to meet cool people.

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Raym on October 13, 2020, 08:00:42 AM