Text only | Text with Images

The Forestry Forum

General Forestry => Chainsaws => Topic started by: Greenhighlander on December 30, 2021, 01:12:03 PM

Title: Oiler stops at half a tank
Post by: Greenhighlander on December 30, 2021, 01:12:03 PM
As the title says my 445 stops putting out B&C oil slightly past half a tank. This just started recently . It isn't a huge deal as the B&C oil has always been roughly 2:1 to fuel in it.  I checked the hose in the tank to see if it had moved at all and it was fine and where it should be.  
Just wondering what might be causing this ?  
Title: Re: Oiler stops at half a tank
Post by: sawguy21 on December 30, 2021, 02:35:46 PM
Remove the line and check for a crack.
Text only | Text with Images